@@alfisdrake I can agree with that, but he also isn't overbearing and he's pretty straight to the point. I'm not saying those qualities are necessarily a bad thing either. I watch plenty of channels with intros, character personalities and plenty of BSing. Shadiversity can be pretty overbearing at times lol I just very much appreciate a solid, to the point, speaks for itself video.
Was shown a trick years ago by an old engineer, who had done flush riveting. For the 3 pins you peened over to lock. He would have drilled a small countersink on each side beforehand. The same as you did for the Allen screws but smaller. And once peened over, they are buffed until totally flush with the body, save getting fingers and trouser pockets caught
And when he drilling the two brass handle halves he could have soldered them together with plumbers solder then unsoldered them. But he looks like he knows what he's doing.
@Jao Bai Dun Most knives don't require a lot of force to unlock....he's clearly struggling to unlock it therefore it is unsafe as it forces his hand to get smacked by the blade. Any good edge on the blade would slice his hand open.
@Jao Bai Dun Eh, here I'd be a bit worried due to the sliding motion it gives. Knives cut best when you pull them, and so this basically looks to me like it doubles the risk. Beautiful stuff, for sure, but I wouldn't put my hands near it closing.
Thought exactly the same. He did notice and folded it with the edge pointing away from him after, but anyone using that for the first time without proper protection is in high risk of injury.
@@lindemann316 No, just saying facts -_-. Don't wanna cause a riot in a youtube comment section from this by the way, several of my comments have lead to arguments for stupid reasons, just don't want it happening again...
As a machinist, allow me to make a suggestion. On your milling machine, use an aluminum sub-plate. It's a softer, disposible, plate that bolts onto your mill's table saving the table from any potential damage by drilling or milling. Cheap insurance if you value the condition of your table. And you should value the condition of your table.
When people watch your videos, it looks easy but to me it is clear that you are hugely professional - you really have control over your sharpening / attack angles when working by hand - respect!
Great work, as usual. That gloved hand right next to the drill gave me chills, but the work is really super nice. The fitting and finishing... Just great.
@@robotkabot7541 No, there is no safety, definitely none. This might be a prototype, but It would have been allot better if Koss thought ahead about safety to carry this in a pocket. That said, I really like the design of this knife, looks unusual while also looking very sturdy. Just sad that it is unsafe to carry in a pocket.
I understand where your coming from but I only have one thing to point out he never called it a pocket knife he called it a folding knife and yes I know same thing but I doubt that’s the knife you’ll want if you either get in trouble or need for survival
@@jangrzyb670 Semantics. Pocket knife... folding knife... this doesn't need to be a knife with a blade that can be locked in place. I had a few knifes that where "folding knifes" in my lifetime... they all could be placed in a pocket. This here is no different... apart from the fact that there is seemingly nothing that locks it in a closed or open state. Which is what I lamented. I love the design, looks really unique. But what use is it if you can only put it on a table, or carry it in a way that is not within your pockets? You can use a pocket knife for basic stuff in survival... no need for a locked big knife. Oh and lastly... if I get in "trouble" with other people... a knife is not the right tool to deal with that. Unless you are in the wilderness and fight a animal... but then I would carry a Crocodile Dundee style "knife". Compared to that... this isn't even a knife.
Looks like the mechanism of the Scorpiodesign Shapeshifter, it's such a neat design. The original idea behind it was to be able to fit a blade larger than the handle
@@MildMisanthropeMaybeMassive I have ideas in mind. A locking mechanism in the handle, and a blade that's hollow in the first portion and a taper all the way in from the spine, with a part of the sink blade sticking out to prevent it from sliding all the way down. A notch is cut down the blade and a rectangular bar is used to keep the blade straight when you swing the blade out with the handle open which would release the lock. The hollow section of the blade would be lined with leather, to midigate the blade dulling, and the hollow blade could have a bit stopping the sink blade from going all the way out. It wouldn't fold in by itself by flipping it, nor would it do the wack ass thing that mortimer rasmey is seen doing when he stabs alexia in the beginning of the second game.
Please do not wear savety cloves at the drill. If that thing get tangled up in there while it's spinning, you might lose some fingers or the whole hand. So please don't do that. But really nice work you did there💪🏼
There are production knives that use this mechanism in case anyone wants one. I've seen quite a few, but the materials probably wouldn't be of the same quality. Edit: One being the Scorpiodesign Shapeshifter EDC
I could care less about knives, if I'm being honest. But I absolutely love watching you make them. You make me care about knives. Please keep making them. Thank you.
I like the method of sticking a cut out of your components on your stock. I'm using it to do the same with custom flooring components in things like a 4' compass.
Судя по обработке - сталь пластилин. А так изделие красивое. Еще не ясен процесс: сначала закалка, а потом шлифовка. Не финишная шлифовка, а даже грубая. Если бы сталь нормальной была, то затрахался бы после закалки шлифовать вручную.
@@bigvideoenergy if I ever move to the US then my EDC will have an old cowboy style black powder revolver, until then I have a titanium spork and a newspaper
Great craftsmanship aside, I learned not to wear gloves when working on rotating machines like milling drilling etc. Extreme danger of getting caught by tool and get pulled in. Just saying no offense.
New design, new idea. We have to push the limits every day. I love it. Even if i cut myself every time I use it i will learn not to cut myself every time I use it...
Love the design! Reminds me of a Scorpio Shapeshifter, but bearing a more modern day sci-fi aesthetic with lots of broad angles and contrasting metals. To me it seems... I don't know... resolute, in its aura.
Needs a quality locking system, but it doesn't look particularly dangerous to me, it clearly should just be held from the back while folding, closing a normal knife in this odd hold will cut you as well. 😂🤔
Well, the knife doesn't really close properly. I wouldn't trust that closed in a rucksack or pocket. This design needs refinement. Nice video and workmanship though
I always tune in as I love to watch your designs come to life. They always give something. I am curious, however... it looks like when retracting this one, the blade is so close to sliding through your hand, is this an illusion of the camera angle or a learning point for you? haha. Thanks for sharing your work, brother!
These are the kinds of videos I really appreciate. No intro, no overbearing personality, no BS. Just straight to the point, here's the process.
Yes so true these are my favorite kind of channels where the content speaks for it's self.
It depends. Michaelcthulhu's videos would be half as interesting without him talking. The guy's so damn funny.
@@alfisdrake I can agree with that, but he also isn't overbearing and he's pretty straight to the point.
I'm not saying those qualities are necessarily a bad thing either. I watch plenty of channels with intros, character personalities and plenty of BSing. Shadiversity can be pretty overbearing at times lol
I just very much appreciate a solid, to the point, speaks for itself video.
Yes I agree
Say less 😎
I really just like the sound effects
No music
No voice
Just peaceful grinding, cutting and sanding
So relaxing
Asmr?
Sounds like sonic youth
Strangely mesmerising
Coming soon.... a commercial using these sound effects to make vaxx more appealing... more appealing tha💀
And drilling
Was shown a trick years ago by an old engineer, who had done flush riveting. For the 3 pins you peened over to lock. He would have drilled a small countersink on each side beforehand. The same as you did for the Allen screws but smaller. And once peened over, they are buffed until totally flush with the body, save getting fingers and trouser pockets caught
Funny enough I had the same exact though as to why he didn't do that... I thought that's pretty obvious and makes a stronger bond...
And when he drilling the two brass handle halves he could have soldered them together with plumbers solder then unsoldered them. But he looks like he knows what he's doing.
All that work, and the brass handle/sheath was rough. Oddly unsatisfying in the end.
@@Gruuvin1 well I think it's more of a prototype, rather than an actual practical knife... it'll do...
@@osallivan231 It's literally a poor copy of an existing crappy knife lol you can't call that a prototype
The "towards your hand" folding action looks terrifying.
you afraid of getting a little cut? it heals.
it only hurts for a moment. not even long enough to whine about it.
@Jao Bai Dun Most knives don't require a lot of force to unlock....he's clearly struggling to unlock it therefore it is unsafe as it forces his hand to get smacked by the blade. Any good edge on the blade would slice his hand open.
@Jao Bai Dun Eh, here I'd be a bit worried due to the sliding motion it gives.
Knives cut best when you pull them, and so this basically looks to me like it doubles the risk.
Beautiful stuff, for sure, but I wouldn't put my hands near it closing.
Safety isn't his first concern, as evidenced by the use of gloves with all that powered equipment.
I mean its cool but also no thanks lmfao
I wouldn't trust that thing in my pocket but it looks cool.
It definitely needs a detent.
Looks stabby
yeah but i t lo ks co ol : ) )
Ditto
I like traditional designs or fixed blades but there's always a niche for the unique.
The folding is what gets me a little bit. Because without those gloves and if you're not careful thats a disaster waiting to happen.
I agree. 12:10 especially got me worried. It seemed to get stuck for a bit, and then almost sliced into his finger
Thought exactly the same. He did notice and folded it with the edge pointing away from him after, but anyone using that for the first time without proper protection is in high risk of injury.
Feels like it should be the halfway point eh
Make a better one.
Well he did say its weird not safe haha
Meh, I could build this easily with those tools...and Vision...and talent....and abilities...and skills. 😬😬
But you don't have any of those 😛😛
@@MVNA_ agreed!
@@MVNA_ r/murderedbywords
Sorry. I wasn’t being an A Hole with my comment. I was acknowledging my lack of any skill set to do this type of work.
@@doogie64 it's very much clear that your comment is a compliment.. some idiots don't understand even mild figures of speech🙄
Finally someone who just gets to work. No long drawn out explanation of materials, time, and processes. Awesome man.
Lmao true, it's normally 4 minutes later where they are like, _Alright, time to get started_
There are people, who want to take up the hobby and learn about those stuff. Shocker much?
@@lindemann316 No, just saying facts -_-.
Don't wanna cause a riot in a youtube comment section from this by the way, several of my comments have lead to arguments for stupid reasons, just don't want it happening again...
@@gsas3012 why not, it boost reach. 😁
And he dosesnt just speed things up 1000x times. Just enough to see whats going on, fast enough that it doesnt bog down the video. Nice.
The only thing that would make it cooler is if you could sink the blade all the way in like a traditional folder.
That and distal taper for balance
Agreed
I'm thinking, if he channeled a groove fort the edge in that back spacer/joint, that would do it...
It looks like it would be possible with this design, but the blade would have to be longer to allow for a longer groove
I like to think that the video isn’t sped up at all and he just actually hammers that fast
Каждое видео удивляет всё сильней и сильней!!! Побольше тебе вдохновения!!! Браво👏
Ахуенный нож из канструкционной стали 🤦♂️👎
RUclips at 4am is amazing
Bless this man for adding time stamps on when he does stuff
I have been watching people make knives for years. That is the strangest knife I have ever seen. Thanks for the videos. 😎
It's not weird, it's amazing
Your machine shop skills are only outpaced by your creativity. Both are at outer space levels. Thank you.
The Hand Opener. Super idea and execution. Super sketchy closing hand trap. Needs some tweaks. Worth a shot, she's a looker. ✌
Очень четкая идея,довести до ума и хоть в продажу,👍🔥👍🔥
Another folding knive I need in my collection xD
Wao, SOMETHING SPECIAL from SOMEONE SPECIAL.
As a machinist, allow me to make a suggestion. On your milling machine, use an aluminum sub-plate. It's a softer, disposible, plate that bolts onto your mill's table saving the table from any potential damage by drilling or milling. Cheap insurance if you value the condition of your table. And you should value the condition of your table.
Bruh the tool was like 1/4" wide and he had it ligned up with a t-slot in the table. Totally acceptable machining setup.
Ok, you twisted my arm.
I'm gonna need one.
What do you need, brother ?
ART.
I've never seen someone so confident as to go that close to their lines before grinding. Awesome, thanks for sharing with us. :)
My father was a machinist he made one of those a long time ago forgot until i saw this video....wow.
Bri
When people watch your videos, it looks easy but to me it is clear that you are hugely professional - you really have control over your sharpening / attack angles when working by hand - respect!
Perfect type of video to go to sleep!
Great work, as usual. That gloved hand right next to the drill gave me chills, but the work is really super nice. The fitting and finishing... Just great.
People dream on nice cars and fancy houses, but all I want when I grow up is a shop as nice as his🙏🏼
When I become rich, if I ever did, I'm buying this. Just to look at it and apreciate the art.
Or become skilled enough to make it yourself
@@zureroomsoesheh8026 maybe.
Or make it yourself
you can buy them from chinese sites, not this one, but the odd style of folding isnt new
@@zureroomsoesheh8026 gee I wonder how much money and training you'd have to sink into study, equipment, raw materials, etc.
Finally, someone has made a folding knife that is bigger when folded.
What a Very Intresting Knife you making koss good job 👍🏻.
Koss...You are my boss
Hey koss, you make a excellent work in this piece. I think we all would like to see your collection some day. Cheers.
Awesome knife simple but very well made id buy one
Nice design, but is there a security that it doesn't push out the blade when in your pocket?
Don't forget seems to try to cut his hand when folding
I think there is no safety. Maybe not yet. As others have pointed out already, I too think this is more of a prototype not ready for pocket carry
@@robotkabot7541 No, there is no safety, definitely none. This might be a prototype, but It would have been allot better if Koss thought ahead about safety to carry this in a pocket.
That said, I really like the design of this knife, looks unusual while also looking very sturdy. Just sad that it is unsafe to carry in a pocket.
I understand where your coming from but I only have one thing to point out he never called it a pocket knife he called it a folding knife and yes I know same thing but I doubt that’s the knife you’ll want if you either get in trouble or need for survival
@@jangrzyb670 Semantics. Pocket knife... folding knife... this doesn't need to be a knife with a blade that can be locked in place. I had a few knifes that where "folding knifes" in my lifetime... they all could be placed in a pocket. This here is no different... apart from the fact that there is seemingly nothing that locks it in a closed or open state. Which is what I lamented. I love the design, looks really unique. But what use is it if you can only put it on a table, or carry it in a way that is not within your pockets?
You can use a pocket knife for basic stuff in survival... no need for a locked big knife.
Oh and lastly... if I get in "trouble" with other people... a knife is not the right tool to deal with that. Unless you are in the wilderness and fight a animal... but then I would carry a Crocodile Dundee style "knife". Compared to that... this isn't even a knife.
Woow || beautiful work, Thank you very much❤️
Прикольный нож, только как будто до конца не складывается
М-да, как говорится, имеется лёгкая незавершённость. Но по конструкции он и не закроется до конца.
Ещё и складывание опасное. Можно порезаться раз плюнуть
lol. its a beautiful mantle piece i would never trust anyone with. that little opening would be great for cutting cigars.
Another amazing craftsmanship.
That closing mechanism looks dangerous, I thought you were gonna cut yourself every single time you closed the knife 😅
Same here lmao
Same
weird no. clever elegant and simple. so that's badass
"Maybe you'll remember me when you're making Skyforge Steel, huh?"
- A random Skyrim blacksmith
Дорогой брат, очень крутая задумка, гениально, супер складной нож!!! Это очень красивый и функциональный ножь!!!! 😎😉🙂☺😀😄🙄💪👌👏🖒👍🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺
Looks like the mechanism of the Scorpiodesign Shapeshifter, it's such a neat design. The original idea behind it was to be able to fit a blade larger than the handle
@CorvoAttano
Naiyuro Damascus I’d love to see a combat ready replica of Corvo’s Folding Sword made.
@@MildMisanthropeMaybeMassive I have ideas in mind. A locking mechanism in the handle, and a blade that's hollow in the first portion and a taper all the way in from the spine, with a part of the sink blade sticking out to prevent it from sliding all the way down. A notch is cut down the blade and a rectangular bar is used to keep the blade straight when you swing the blade out with the handle open which would release the lock. The hollow section of the blade would be lined with leather, to midigate the blade dulling, and the hollow blade could have a bit stopping the sink blade from going all the way out. It wouldn't fold in by itself by flipping it, nor would it do the wack ass thing that mortimer rasmey is seen doing when he stabs alexia in the beginning of the second game.
Opening sound is satisfying 🤣🤣🤣
Good job , keep going. 🌹👌👌🤗
Искра хорошая, сочная. Круто! Заморочился парниха, постарался.
Please do not wear savety cloves at the drill. If that thing get tangled up in there while it's spinning, you might lose some fingers or the whole hand. So please don't do that. But really nice work you did there💪🏼
Just came down here to comment the same
That’s a tremendous knife the workmanship is second to none 👍👏
How do you come up with these retracting knife designs?! They’re amazing!
Yea how does he do it, as soon as I saw the thumbnail I was like, HOW THE HELL WOULD THAT WORK, but I saw the video and I know now
Yea how do you
Yes,need inspiration
There are production knives that use this mechanism in case anyone wants one. I've seen quite a few, but the materials probably wouldn't be of the same quality.
Edit: One being the Scorpiodesign Shapeshifter EDC
Great knife
Talk about letting the Art speak for it self.
I could care less about knives, if I'm being honest. But I absolutely love watching you make them. You make me care about knives. Please keep making them. Thank you.
The correct term is "I couldnt care less..."
How much less could you care?
Now that's a nice blade my style 🤙👌
Já acompanhei vários trabalhos seu, incrível suas idéias.
Parabéns mesmo, pra quem gosta de lâminas como eu é um show.
A wonderful piece of art.
Why though ? It made itself bigger when closed. Isn’t the point of closing it to make it smaller and pocketable ?
Gee, you're fast with that hammer fixing the rivets. Nice creation!
I like the method of sticking a cut out of your components on your stock. I'm using it to do the same with custom flooring components in things like a 4' compass.
Большое спасибо за вашу работу! Очень красиво и необычная форма !
This is a miniaturized switch axe from Monster hunter ^^, well done !
Thank you for not using music, what a legend
У меня какие-то чувство недоскладаности этого ножа
За проделаную работу можно гордится. Ток херня полная!!!;)
Мне одному показалось что он его из пластилиновой стали сделал?
@@ВасилийОрехов-р2у почему ? Вроде бы все норм ?
@@ДжонПолДжонс-е7э не видел я инструментальную сталь такими листами. Могу ошибаться конечно
Судя по обработке - сталь пластилин. А так изделие красивое. Еще не ясен процесс: сначала закалка, а потом шлифовка. Не финишная шлифовка, а даже грубая. Если бы сталь нормальной была, то затрахался бы после закалки шлифовать вручную.
How cool! That's a really interesting folding mechanism
I can imagine what his secret EDC is... probably unfolds a katana out of his wallet
I use a gun
@@aydenskates4030 how original for an American to EDC a gun.
@@bigvideoenergy if I ever move to the US then my EDC will have an old cowboy style black powder revolver, until then I have a titanium spork and a newspaper
@London Ryker what is this sorcery ? Jk
@@bigvideoenergy how original for anyone who doesn't want to get shot in a knife fight to use a gun you mean.
Amazing creation,pretty knife 👏🤘👍
I like how it kind of looks like a shark or fish when it’s closed. It even has the eyeballs 😂
No sir, you have the eyeballs
Gorgeous. Just Gorgeous🌿
I have a question koss, how long have you been making knives? You just make it look really easy
Love it. Fantastic idea.
I love your videos and do you have the template?
here: drive.google.com/file/d/1MT3VvsdTpTa8rwr01AOEIkUSk0ZmC5M6/view?usp=sharing
feel free to use =)
Thanks so much I’m going to try to make it
Хорошие исделие получилось с меня лайк и подписка.
Great craftsmanship aside, I learned not to wear gloves when working on rotating machines like milling drilling etc. Extreme danger of getting caught by tool and get pulled in. Just saying no offense.
yep, know a guy that lost a couple of fingers that way.
My woodshop teacher had 3 fingers because of that and a table saw....2 seperate accidents
I got my finger tip on a bench sander ouuu that stung
Worry about your own hands.
@@dancearoundtheworld5360 I feel you on that one, I only had half a fingerprint on my index finger for a year until it grew back
Its nice to see something different.., I like different
Now that's a first for me, never seen one like that.
New design, new idea. We have to push the limits every day. I love it. Even if i cut myself every time I use it i will learn not to cut myself every time I use it...
Love the design! Reminds me of a Scorpio Shapeshifter, but bearing a more modern day sci-fi aesthetic with lots of broad angles and contrasting metals. To me it seems... I don't know... resolute, in its aura.
This looks like a great way to get to know a hand surgeon.
Needs a quality locking system, but it doesn't look particularly dangerous to me, it clearly should just be held from the back while folding, closing a normal knife in this odd hold will cut you as well. 😂🤔
Wow, that is such a cool concept well executed.
Задумка не плохая, но есть какая-то незаконченость в нём.
Закрывается опасно
Недодумано
Я бы сказал не тактично и не практично выкидной нож его заменит а так выглядит эпично
Все правы
Сделайте лучше, критиканы мля.
Very cool design. 😀😄
Thats one of the most badass knives ive ever seen!! Taking orders!!?? How much???
That is supremely cool to see!
Well, the knife doesn't really close properly. I wouldn't trust that closed in a rucksack or pocket. This design needs refinement. Nice video and workmanship though
That is simply the perfect shape of clip point in my opinion; beautiful just beautiful.
I always tune in as I love to watch your designs come to life.
They always give something.
I am curious, however... it looks like when retracting this one, the blade is so close to sliding through your hand, is this an illusion of the camera angle or a learning point for you? haha.
Thanks for sharing your work, brother!
i need this in my life 😍😍🔥💪
Interesting design, but not particularly practical. When open, the two handles on the upper edge do not form a common line, not so nice.
This ain't a weird folding knife, it is an awesome folding knife.
All that gear yet no lube on your drill bits
The metal is still SOFT before tempering in hot oil.
Coolest knife design ever
Finally, a blade making video that doesn't feel slow even at x2 speed!
Finally, a knife name that actually makes sense.
Very slick setup, thanks for sharing.
Damn you got some skills with that grinder
非常喜欢这种视频，特别是设计纪念和工艺过程。最重要的是我不懂英文但依旧能看懂，这太棒了。
beautiful video very nice job good morning
Loved this. You have me hooked. Im going to follow for more
The beginning of a good design.
thats really am awesome design! 😉👌
Weird indeed! Nice project anyway! Congrats