2011 Nissan Pathfinder V8 Full Front Titan Suspension Swap Explained | R51

Поделиться
HTML-код
  • Опубликовано: 13 дек 2024

Комментарии • 26

  • @DriftaholiC
    @DriftaholiC Год назад +1

    Just learned about this compatibility. Time for an Armada swapped Frontier desert hopper with IRS :P

  • @Champsteroffroad
    @Champsteroffroad 11 месяцев назад

    Nice set up. Did your pathfinder all ready have a VK56 in it or did you put it in?

  • @HardEnduro8
    @HardEnduro8 3 года назад

    Nice build bud 👍🏼

  • @samanthawasson6583
    @samanthawasson6583 Месяц назад

    upper/lower control arms, ball glints upper/lower, cv axle L/R, tie rods what’s else am i missing for front titan swap? and what’s the parts breakdown for the armada rear?!!!

    • @fabiansbikelife1558
      @fabiansbikelife1558  Месяц назад

      You're gonna need extended brake lines as well as shocks. For armada swap in rear you will need armada subframe, axles and a shock relocation. I had a fabber make me some shock towers and custom lower control arm for my rear Coilovers. You will need extended brake lines for rear as well.

  • @DownTheSights1
    @DownTheSights1 2 года назад +1

    Im assuming that you had to change the master cylinder to a titan one? If not how do the brakes feel?

    • @fabiansbikelife1558
      @fabiansbikelife1558  2 года назад

      I did not change the Master cylinder, breakes feel just fine and actually better.

    • @DownTheSights1
      @DownTheSights1 2 года назад +1

      @@fabiansbikelife1558 weird, Ive always thought it was a master cylinder issue from the squishy breaks ya know?

    • @fabiansbikelife1558
      @fabiansbikelife1558  2 года назад

      @@DownTheSights1 Right!, so far no issues but who knows in the future I might have to replace it

  • @aaronwilkinson7477
    @aaronwilkinson7477 10 месяцев назад

    Are the pathfinder and titan spindle/ steering knuckles the same height from ball joint to ball joint?

    • @fabiansbikelife1558
      @fabiansbikelife1558  9 месяцев назад

      As far as the height, I wouldn't be able to tell you that man, sorry.

  • @jasonnelson6624
    @jasonnelson6624 3 года назад +1

    Any idea why it overheats? Just wondering because my v8 r51 can run all day in Las Vegas summer. Good luck.

    • @fabiansbikelife1558
      @fabiansbikelife1558  3 года назад

      Nice, Because the electric fans i bought did not have a shroud and as you may know the OEM does have one. So i when ahead and bought the CJD Electric fans which do have a shroud. As of today i have not tested them, I'll will keep you posted!... i hope they fix my problem.

    • @jasonnelson6624
      @jasonnelson6624 3 года назад +1

      @@fabiansbikelife1558 makes sense. Yeah it's amazing how much the shroud effect temp. On my firebird it had a very small metal shroud stock. Looked like it couldn't make much of a difference. But it would overheat and push out all the coolant. After I got an aluminum radiator and the shroud wouldn't mount so I left it off. Now I know. Maybe someday I'll fix that lol.

  • @normieventura535
    @normieventura535 2 года назад +1

    Is there a way to keep the sway bar??

    • @fabiansbikelife1558
      @fabiansbikelife1558  2 года назад

      No, It does not fit anymore. You can probably look into a custom one.

  • @POWERTRIP2043
    @POWERTRIP2043 Год назад

    Do the seats just bolt-on to the oem brackets? Specific brand or design?

  • @afsal1989
    @afsal1989 2 года назад +1

    was it all bolt on?

  • @wadesafool
    @wadesafool Год назад

    Are you running sway bars?

  • @charros4811
    @charros4811 2 года назад

    Same handling without the sway bar

    • @fabiansbikelife1558
      @fabiansbikelife1558  2 года назад +1

      I would say so, Its still rides as good as if it had it on