Great stuff man. I couldn't find your video when I searched "ls tuning harness" or "ls tuning bench harness" in search. I recommend fixing up your SEO because this video deserves more views!
I've been trying hard. I talked to some other RUclipsrs they said the biggest thing is getting past that monetization block once you are there you start showing up but I'll try adding some more key words I to the descriptions. Thanks for the advice!
@@FixedUntilBroken Check out this video ruclips.net/video/oR3DQRDoTVI/видео.html it really helped me pick up more views and subs. The biggest thing that helped me is trying to find your own video in search. If you can't find it, no one else can either so use search terms in your title like "ls swap harness" "DIY vats delete" etc. Also make sure they are repeated in your description and your title is in the key words as well. look up "carb ls" in youtube and a lot of my videos will be on top even if they don't have the most views. I know you can do it!
I will check it out. Thanks for the words of encouragement. Its funny these tuning videos do at least 5x better than my DIY CNC I am building and I way more excited about the CNC haha.
The red and blue plastic pieces on my PO1 were brittle and cracked. I replaced them as well as re-pinned a few pins but now the connectors don't seat properly before tightening it down. I need to check for bent pins. Sigh. Any other reason this would happen?
So after I filmed this the Ls droid community pointed out you only need the blue connector and that the grounds on red are not needed so that will save you some time making one. I assumed you needed all PCM grounds. Here is a link to the EFI live guide that shows it like that. They also pointed out not to use this connector on a 98/97 even though it will plug in. download.efilive.com/Tutorials/PDF/Bench%20Harness%20Tutorial.pdf?fbclid=IwAR3eiMKV8mUaMFrDLrj0rVEvDfee7lFYqeDPiu43UB0ht9UCrt_DHIDpAa4 I made a video with corrections to this one. ruclips.net/video/l4EHkcX7qiw/видео.html
Great stuff man. I couldn't find your video when I searched "ls tuning harness" or "ls tuning bench harness" in search. I recommend fixing up your SEO because this video deserves more views!
I've been trying hard. I talked to some other RUclipsrs they said the biggest thing is getting past that monetization block once you are there you start showing up but I'll try adding some more key words I to the descriptions. Thanks for the advice!
@@FixedUntilBroken Check out this video ruclips.net/video/oR3DQRDoTVI/видео.html it really helped me pick up more views and subs. The biggest thing that helped me is trying to find your own video in search. If you can't find it, no one else can either so use search terms in your title like "ls swap harness" "DIY vats delete" etc. Also make sure they are repeated in your description and your title is in the key words as well. look up "carb ls" in youtube and a lot of my videos will be on top even if they don't have the most views. I know you can do it!
I will check it out. Thanks for the words of encouragement. Its funny these tuning videos do at least 5x better than my DIY CNC I am building and I way more excited about the CNC haha.
@@FixedUntilBroken Lol, I know exactly what you mean! But you gotta find your audience first and then sprinkle in some of your personal projects!
The red and blue plastic pieces on my PO1 were brittle and cracked. I replaced them as well as re-pinned a few pins but now the connectors don't seat properly before tightening it down. I need to check for bent pins. Sigh. Any other reason this would happen?
So after I filmed this the Ls droid community pointed out you only need the blue connector and that the grounds on red are not needed so that will save you some time making one. I assumed you needed all PCM grounds. Here is a link to the EFI live guide that shows it like that. They also pointed out not to use this connector on a 98/97 even though it will plug in. download.efilive.com/Tutorials/PDF/Bench%20Harness%20Tutorial.pdf?fbclid=IwAR3eiMKV8mUaMFrDLrj0rVEvDfee7lFYqeDPiu43UB0ht9UCrt_DHIDpAa4
I made a video with corrections to this one. ruclips.net/video/l4EHkcX7qiw/видео.html
Nice job mate big thumbs up 👍
which pins did you used for ground power & data?
Will this work for all 3 pcms mentioned? Including pcms with the blue/green connectors?
Am actually going to do a new video this weekend on this very subject! Subscribe so you don't miss it.
I don't know what it is, but I'll see it all the way.
Thanks!
No problem!
Do you really need the red connector?
Nope only the blue. My thought process was that I was going to repin back in some injectors and sensors for testing but never did.
can ls droid read a 411 pcm
Yes