Adding SPEED CONTROL to your tractor's remote hydraulic outlets. Homestead Hydraulics for you
HTML-код
- Опубликовано: 10 сен 2024
- TYM 654 and the Pronovost Puma-84 Snowblower taming the super fast auger direction control
tym.world/en-us/
pronovost.qc.c...
ph.parker.com/...
Just trying to tame the cylinders to get better control over the discharge chute directional control.
This will work for many different applications. We add flow control valves!! to control the speed of movement
First thing I did with my used tractor with leaks all over the hydraulics, was to remove every damn bit of teflon tape the previous owner put on...I agree, it is the kiss of death...
man this is awesome ,, i knew something was up with my hydraulics,,,, i just bought a tym 2515h with a 64' puma blower and man when trying to control the shut , just drives me nuts sometimes as you have to be soooo delicate with it ,,, wayyyy to sensitive , This is my first tractor so i aint no expert at all of this ,,, glad to know there is something i can do to fix this issue ,,, much appreciated from a fellow new brunswicker :)
So glad you found this helpful. All the parts can be had at Princess Auto
The issue is the flow rate. This is what the flow controls are overcoming. It's using the relief to dump off the excess flow. As you know the best way is to slow the pump but that means slowing the motor. These tractors do not have metering spools, so rather than ad an auxiliary valve bank the flow controls were the cheapest and easiest
@@JimsNBHomestead thanks will definitely chek princess auto out
Same here , glad i found your channel , will have plenty of vids to look at now :)
Thanks for joining us
I agree with the statement on Teflon tape usage
Well thank you sir. You'd be surprised at the damage that stuff can do in hydraulic systems
@@JimsNBHomestead oh I know as I’m an hd mech and a mill wright as well lol
Brothers in Wrenches
When the 15/16th wrench was too big, I was expecting you to ask Jake got the 14/16th wrench!
Hi Dave we have a running joke in the plant, our apprentice said he needed a 10/16 wrench. you will see random 10/16 stickers around the plant
@@JimsNBHomestead Perfect!
Think the flow control valves are installed in the wrong flow direction. There’s a flow diagram typically on the side of the valves, take a look.
Flow control out of a cylinder not in. The flow control produces resistance. This is the best control
Hey there.
I have the same blower on my McCormick Tractor. Do you put any lubricant on the rack and pinion gear system that turns the chute? Something that won't just wash off.
Thanks !
I don't think it would make a difference really chain lube spray would definitely not do any harm
@@JimsNBHomestead Ok thanks, 👍 nice job slowing down the Chute I have the same issue. I can never set the deflector it's either all the way up or it curls way down at the ground, to get it to stop half way is a struggle !
@@MKMALM2024 the flow controls will help or you have to throttle back off of PTO speed
Try keeping the camera on the work you are doing.
HA HA HA thanks for the heads up LOL did you hit the subscribe button?
Did you try and hit the subscribe button
On voie rien ……?
What do you mean you don't see anything?. please explain exactly what yo mean. try using a translation on line program if you don't understand English.
Que voulez-vous dire que vous ne voyez rien?. s'il vous plaît expliquez exactement ce que vous voulez dire. essayez d'utiliser un programme de traduction en ligne si vous ne comprenez pas l'anglais.
( ͡° ͜ʖ ͡°)
i use teflon tape
OMG really? I hope you never you never have to do deal with the agony of a strand of Teflon Tape get stuck in an orifice or blocking the pilot port of a pressure relief valve. May god protect you from such perils
You know what i said right? I was pretty clear wasn't I?