Flow Control Valves in Hydraulics - Full lecture with animation
HTML-код
- Опубликовано: 2 окт 2024
- In hydraulics, flow control valves are used to control the volume of oil supplied to different parts within a hydraulic system. This way, the speed of a cylinder or the rotational speed of a hydraulic motor can be controlled.
What you see in this video:
0:31 Overview hydraulic flow valves
1:12 Function of simple throttles
1:43 Volume flow within the system
3:30 What´s the difference between throttle and orifice?
4:25 Pressure compensated Flow Control valve
5:56 Positive and negative load or: Location Flow Control valve
7:48 Examples hydraulic circuits with flow valves
More information about hydraulics you get on our webpage:
learnchannel-tv...
Our Engineering Tutorial Video Channel. Topics covered: Electric motors, Robotics, Hydraulics, Pneumatics, Sensors in the field of automation.
More stuff about hydraulics you get on:
learnchannel-tv...
Our official website: learnchannel-TV...
Like us on Facebook:
/ learnchannel-tvcom-174...
Contact: info@learnchannel-TV.com
Music by: Adam Vitovský Link: www.youtube.co....
thank you very much
thanks
So the flow controller valves are best to be used in the in positive load side and a relief valve is best to be used in the negative load (the return line). Right?
Nice jump scare
Hi, what is your recommended type of hydraulic we can used in extracting the coxonut milk
Hi and thanks for the info: I am building a test stand to test the load over distance in a shock. We want to move the shock at different loads to determine the resists and be able to adjust the pressure to act as different spring rates, what type of valve would we need to make this work.
Thank you bro👍
Thanks you
Can someone help me with a question?
I'm not real familiar with hydraulic details... I build a small tow behind backhoe/trencher.. It is powered by a 6.5hp engine and I'm using a 2 stage log splitter pump. (11gpm) 2gpm on stage 1, and 9gpm on stage 2... My problem is the speed of my cylinders are super fast. So fast that it makes it almost impossible to operate... I'm wanting some type of valve to slow all of my cylinders down... What type of flow valve do I need?
I'm currently looking at a 0-11gpm hydraulic flow control valve from northern equipment.... It's the type that has three ports and a little lever that can be moved to open and close the flow.
Can someone please give me an idea of what I need to purchase... Thanks
Very well made video! Animations are just on point, able to give learner a better view of what is happening inside the valve.
Grüsse nach Deutschland Stuttgart - Denkendorf. Freue mich auf Zusammenarbeit.
❤❤Nice video 🎉🎉
Thanks for the video it is a good one
owerheating oil. if you close oil, in oil flow control valve.and need 150bar but low flow. some schematics please
Nice video
Easy to understand thks sir
Vinod Barkya Habale TYME
Muito legal essa apresentação, vai ajudar muito o entendimento dos futuros profissionais.
Obrigado a vc
nice, can you assist, I have a very pro made power pack, made by KA ME WA Finland, I have almost zero flow and little pressure, possibly the rotation was wrong for a minute, but the pump is load sensing, wonder if the shaft seal blew with reverse rotation
could I block the LS port on the valve block, see what happens? the solenoid valve opens, I use lever controls to feed 3 rams, one motor, the pressure comp flow valve is before the 4 valve lever block as I wanted to slow it all down, really need help here, thanking you there is zero press at the gauge, one ram will creep, motor and other cylinders do not move
hi friend, do you have software, im interested this soft, i need using for purpose education. thanks
This vid was made with Blender
tq sir
Ok
👍
nice
Difference btw DRV8 and DV8 valve ??
One is free flow return, the other is restricted both ways
#wekeephydraulicmoving
Hey can you tell me which software will be best for designing 3d model of hydraulic press, deep drawing hydraulic press and other hydraulic presses?Tell me both top paid and free software separately.
I hope you'll reply me soon as it will be really helpful for me. Thank you.
I cannot tell you which software is the best. I for myself use Blender.
@@learnchannel-TV I mean can you name some free software for the same which are good in your view...
what the relationship of FCV setting and the speed of the hydraulic cylinder for extend and retract operation?
អគុណបងthank
Tnanks