Thank you for sharing this tutorial! It was so easy to follow and your instructions were great! I just purchased some acrylic to make holiday gifts and can't wait to try it!
This is regarding putting photo on acrylic. Why will it not let me pick slice after i enlarge my black line and enlarge my photo. I put my photo on black lines and select both but my slice button is grayed out and will not let me slice?
Just a few troubleshoot ideas: Is the piece locked so you can't edit it or is the file too big or small quality? Make sure it's svg file. Png is ok in some cases to have it convert to svg in design space but it will need to have the right math information for the pixels. If it's grey then it might not be a solid line that's compatible for slice. Design space might also need an update. Might be worth importing it again or converting it again as design space can also be temperamental.
Great video! I have a Cricut Maker 3 and I verified that it has the latest firmware. I have also updated my Design Space and installed the engraving tip. When I select the acrylic in the materials tab it tells me that acrylic is not compatible with my setup. I'm at a loss. Any suggestions??
Acrylic. Thanks! You did a great job of providing details and resources without getting in the weeds of the technical process. When you go through filters and such on the website you mentioned, what effect is it you are looking for to know you have a good image?
So..you have the bases and acrylic blanks linked here to Amazon that YOU used but...The acrylic blanks are 4mm NOT 2 mm with this product..how did you get this to work then on the maker if the blanks are 4mm?? I have been having a MAJOR problem finding a base that holds 2mm blanks securely..these bases are all made for the 4mm width. I have had to return 3 sets of these already because they don't fit securely, they wobble :( LOVE your tutorials though!
I have the same problem but it still works ok. I'm gonna try sticking white adhesive foam that's 1mm sheets to the part that goes in the 4mm slot. It would create a sandwich. I was going to glue extra acrylic pieces but i figured the glue might cause shadows and idk how it would work with the foam sheets but i feel like it would work out. I'll try it out and be back.
Thank you!! You were the ONLY video that showed me something helpful with using pictures in SVG images for etching! ❤
I'm so glad you found it helpful! 💖
Acrylic!! Those acrylic pieces came out beautifully. I wish you would have done this as one of your Craft & Convo's lives.
Hi Kathy!
I’ll plan to do it on live.
Acrylic! Beautiful can't wait till try
Acrylic, You Made it look so easy!!! I always enjoy watching your videos and I learn new tricks all the time.
Wow Patrice, Acrylic, that is awesome, can't wait to experiment with this one. Thanks for sharing
you're going to love it!
That is so beautiful acrylic I would love to make one for my children
thanks so much for watching
Beautiful Acrylic I Love It
Acrylic
Hello this is something that on my long list of crafts to do thanks for all the awesome video that I use to help me get better.
💕💕💕 thanks for your support
Wow these are beautiful.
Awesome! I’m so glad you can rewind on here 😆
Kimber 💕
I'm so glad you did it Patrice! They came out great!
Thanks, Dani!!!!
Thank you for sharing this tutorial! It was so easy to follow and your instructions were great! I just purchased some acrylic to make holiday gifts and can't wait to try it!
Glad it was helpful! These are super fun to make.
Acrylic, those look awesome.
Thank you!
This is regarding putting photo on acrylic. Why will it not let me pick slice after i enlarge my black line and enlarge my photo. I put my photo on black lines and select both but my slice button is grayed out and will not let me slice?
Just a few troubleshoot ideas:
Is the piece locked so you can't edit it
or is the file too big or small quality?
Make sure it's svg file. Png is ok in some cases to have it convert to svg in design space but it will need to have the right math information for the pixels.
If it's grey then it might not be a solid line that's compatible for slice.
Design space might also need an update.
Might be worth importing it again or converting it again as design space can also be temperamental.
Acrylic ..... they came out good 💕
Acrylic! That was an awesome video. Easy to follow. Thank you!
Thank you so much!!
This acrylic project is really beautiful!
Thank you
Acrylic, because of your videos I am encouraged to try different things, thank you for all you do for us.
Brilliant tutorial but what did I do wrong 🤦🏻♀️ I just got the lines on the engraving & it not filled in 😢
Awesome video..Ordered my supplies today!!!
thank you for the video! ive done all of this and it wont allow me to change it from cut to engrave?
Acrylic , I just love how I can give the family
ACRYLIC....and thanks I needed a video like this. So detail...
Thanks for watching 💕
Thank you for this tutorial, very helpful and easy to follow. I downloaded the fill file, thank you very much for that! Luv this video.
Glad it was helpful! Thank so much for watching!
Acrylic. Great video!
Acrylic!! I love how awesome they look.
Thank you!!!
Acrylic. This is so cool!!
Thanks so much!
I would really love to try this acrylic method!!! ❤
They came out beautiful! I always wanted to do those acrylic blanks, but was very intimidated. You make it look easy. Thanks!!
You can do it!!!
These are beautiful!!!
Thank you!
Recommend using spray Away glass cleaner. It doesn’t have ammonia in it. It’s much better on the acrylic.
Acrylic..you made it look so easy hope I can make it happen!! Thank you!¡
You can do it! 💕
~ Acrylic ~These are amazing!!!!!!!!
Wow really helpful. I am just starting to work with acrylic.
Acrylic. This looks amazing
Thank you!!!
Acrylic, thank you for the great tutorial
Acrylic..very informative video
I loved this video!!! Not sure how I missed it back in March, but better late than never:)
awwwww! Thanks, Mar Bear!
Wow they came out great 💗💗💗
Thanks, Lucy!
Great video! I have a Cricut Maker 3 and I verified that it has the latest firmware. I have also updated my Design Space and installed the engraving tip. When I select the acrylic in the materials tab it tells me that acrylic is not compatible with my setup. I'm at a loss. Any suggestions??
Acrylic. This looks like a great project. What if you don't have a Maker 3, can you still use the blade
on a regular Maker?
The original maker can do this.
Acrylic. Thanks! You did a great job of providing details and resources without getting in the weeds of the technical process. When you go through filters and such on the website you mentioned, what effect is it you are looking for to know you have a good image?
TFS…those acrylic blanks came out nice 👍🏽 great job as usual 😊
Acrylic very nice 👍🏾
Acrylic. You did an awesome job. I want to do one of my Mom. She passed away in 2015 and want to share with my siblings.
Do you happen to know if the engraving tip can be used on IOS (iPad/iPhone)? Thank you.
Acrylic! Love it!
They look GREAT! Could you have left the plastic covering on the acrylic back when you stuck them to the mat?
Tracey
Thanks, Tracey! I’m sure it would be fine. I’ve forgotten to take it off several times.
Beautiful!
💕💕💕💕
ACRYLIC…wow these are great! Thank you for you tutorial and the opportunity to win the material to try it out!💗💗
Hey girl 💕
Thank you so much for this! And for the fill lines svg! I'm going to try these this week :)
Beautiful
So..you have the bases and acrylic blanks linked here to Amazon that YOU used but...The acrylic blanks are 4mm NOT 2 mm with this product..how did you get this to work then on the maker if the blanks are 4mm?? I have been having a MAJOR problem finding a base that holds 2mm blanks securely..these bases are all made for the 4mm width. I have had to return 3 sets of these already because they don't fit securely, they wobble :(
LOVE your tutorials though!
I came here looking for the same answer. I want to make them to sell and I want the acrylic to be in there securely!
I have the same problem but it still works ok.
I'm gonna try sticking white adhesive foam that's 1mm sheets to the part that goes in the 4mm slot. It would create a sandwich. I was going to glue extra acrylic pieces but i figured the glue might cause shadows and idk how it would work with the foam sheets but i feel like it would work out. I'll try it out and be back.
Good video thanks looks good ❤
Acrylic luv luv luv
Great watching learned a lot 💕
Thanks, Ms. Ruth 💕
love this
thank you!!!
Beautiful job
Thank you!
Help. No matter what I do I can't seem to get the slice button to activate?
Nice video. Thank you!
Acrylic. Thanks!
I was totally lost but came out really beautiful
Can I ask why you did fill lines?
To fill in the entire image. If not, the engrave option only outlines.
Yay - no maker for me yet but someday 🙌💘🙋♀️
Everytime I go to slice the image into the fill lines, no matter what I do I can't get the slice option to come up.what am I doing wrong?
Is the image one layer?
Acrylic 🥰
I have tried and tried, and I can't get this to work I don't know what I'm doing wrong but it won't let me slice the image
me too
can't slice
ACRYLIC!!!!
I tried picsvg and the Cricut Design Space wouldn't accept my photo.
I times by 10 with the fill lines but it still doesn't look like yours did lol. Help me
They came out so beautiful. 😍🧡 It really engraved all all the details within the design
thanks so much, Cassandra!
You did an amazing job. I went to your Amazon & Etsy shop, but I didn't see any for sale. Do you sell these and if so, how much? Thank you ☺️
Sorry, I’m not selling these. Thanks for the interest.
😍😍
ACRYLIC
Acrylic
acrylic, love these so much
Morning
!
👍
Good morning Tricey Pooh💞💞
No maker for me and not for sometime. But thanks for the video
Thanks for watching 💕
naw, get a cnc router wayyyyy more detail when finished.
hi
🤩🤩
ACRYLIC
Acrylic
ACRYLIC
Acrylic
Acrylic
ACRYLIC
acrylic
ACRYLIC
Acrylic
Acrylic
Acrylic
I tryed
Acrylic
Acrylic
Acrylic
Acrylic