Titan Capspray 6 Stage HVLP Turbine Paint Sprayer Review & Demo

In this review we cover a Titan 115 6 Stage HVLP Turbine paint sprayer and show it spraying cabinet finishes. We go over the features of the turbine, the Maximum Elite Gun and more.
Capspray with Maximum Elite Gun pittsburghsprayequip.com/prod...
Or Maximum II Gun
pittsburghsprayequip.com/prod...

[@James26285]

Thanks for the review. My boss just bought one and we should have it in a week. Can't wait to get my hands on it

[@ihave35cents95]

Great tutorial .Bought one last week it paid for itself in 6 hours.

[@adelaidewinetours]

how much are they?

[@ihave35cents95]

@@adelaidewinetours 1800

[@blt981]

Thank you brother I understood everything you said.

[@FranciscoAlvarez-nl3of]

I got this workhorse and this is the best investment I've ever had works great!!

[@allenchan6549]

What projects do you usually work on?

[@FranciscoAlvarez-nl3of]

@@allenchan6549 kitchen cabinets and countertops and cars this thing is amazing!!

[@ihave35cents95]

Tell me about it. I put two coats front and back on 300 cabinet doors using Ben Moore advance in 6 hours I don't know how I lived without this thing for so many years. And I did all that with one gallon of paint that's the fastest five grand I ever made

[@ILruffian]

@@ihave35cents95 Did you spray the BM Advance un-thinned? I have the Fuji Q5. It doesn't come close to being able to spray Advance or Cabinet Coat un-thinned without serious orange peel and dry spray. Looking at getting a TriTech T5.

[@ihave35cents95]

@@ILruffian I cut the advance with one quart of floetrol and then I thinned each cup about 5 percent. With number 4 tip. Comes out like glass. If that doesn't work use a number 5 airhead. I did notice the other day I didn't need to thin as much when I used a gravity-fed gun. Ben Moore does say you'll have no problem spraying it with a 4 or 5 stage turbine. Just make sure you get three mils on there so Advanced can do what it was designed to do and that is level out.

[@robertkampman9320]

Excellent, thanks!!!

[@rantano1]

I have titan capspray 105 and works pretty good so far but I need capspray 115

[@omnexyion]

Thank you mentioning for taking that filter off! I just bought the capspray 105 and my go to cabinet paint is PPG breakthrough and I have found removing the filter even when using an airless gun for breakthrough helps a lot.

[@leodesforges161]

Which filter do you remove?

[@omnexyion]

@@leodesforges161 the metal mesh filter that is inside the spray gun paint can. Just pull it off and comes out easy

[@leodesforges161]

I was asking about which filter in your airless you remove. The gun filter or the large prefilter.

[@omnexyion]

@@leodesforges161 I thought I was clear my apologies; the gun filter

[@omnexyion]

@@leodesforges161 Do that only with continuous use so no buildup occurs a d wash thoroughly afterwards!

[@maricelavaldez4089]

Wow!! Genial 👍 thanks

[@omnexyion]

Any recommendations or products for what to clean water based products for the HVLP gun (ex PPG breakthrough) with?

[@Spencerbuildsit]

Came looking for filters for a 9100. Pleated paper or foam? Is a regulator needed for a 9100 with a Fuji gravity fed or is the high/low switch enough?

[@mjmald]

Can I convert that to a 2 quart pot easily?

[@aflautomotive]

Very interested in this capspray 115 turbine. I have 2 questions...
1. Can you run other brand turbine guns on this turbine?
2. On the power switch what is the psi and cfm for the hi & low settings?
Thanks, hope to hear from you soon...

[@PittsburghSprayEquipmentCo]

Hi there you can definitely run any turbine gun brand you want off the unit, the PSI on the high and low setting ill check

[@matt9822]

Anyone spraying command with this unit?

[@johnfrederickson3082]

Will the Titan 115 spray Centurion 2800 series polyurethane paint unthinned?

[@PittsburghSprayEquipmentCo]

Hi I don't think it will centurion needs air assist airless, airless with a fine finish tip or a conventional (non hvlp) spray gun

[@PittsburghSprayEquipmentCo]

We like the Graco gx 19 with tritech fine finish tips or a tritech t4 hopper unit

[@carloso.sanchez1479]

What would be the best paint for cabinets using the cap sprayer

[@nothingsimpostleble1593]

Sherwin Williams emerald

[@omnexyion]

I use the PPG breakthrough, go to cabinet paint. Dries uniform, fast and higher viscosity for less thinning or none at all depending on what you are trying to do.

[@chrissalazar183]

Is fuji better or the titan?

[@PittsburghSprayEquipmentCo]

Hi Chris it's a bit subjective but here would be my thoughts the titan 115 capspray is the only 6 stage turbines on the market this provides alot of paint breakup power it also has a low pressure switch for stains however fuji q series have better heat control and a bit more gun options.
For heavy thick paints capspray 115 for long spray sessions or quieter fuji may be the route

[@FK-kr3xs]

Can you paint cars with cap sprayer?

[@PittsburghSprayEquipmentCo]

Technically you could though I would recommend the Apollo precision 5 with the automotive spray gun kit that has air caps and nozzles setup for car painting

[@PittsburghSprayEquipmentCo]

This is the Apollo automotive setup

[@PittsburghSprayEquipmentCo]

pittsburghsprayequip.com/products/apollo-bare-p5prole-120v-5-stage-turbo-paint-system-w-b7600-spray-gun-stainless-black

[@FK-kr3xs]

@@PittsburghSprayEquipmentCo
Ok. Thx.

[@Obshowersyndicate]

6 for another. 05 psi

[@CarlosHernandez-cz1fn]

Soy de México...esa turbina compresor...es bonito.. pero es caro.dicen que vale 1800dolares. Y. Qué tal de ligeras serán. De peso ?? Porque. 10. Kilos. Creo es algo ligero. Pero. Y si pesan más ?? A ver. Si. Las hacen más económicas.

[@martinnovelo4351]

De que parte de Mexico Eres carnal? Yo aqui estoy de Este lado del charco ocupas una de esas???

[@albertohuertaperez1939]

Esa máquina es muy lento como una tortuga 🐢 no recomiendo

[@juanrojas348]

It makes too much noise 😔😔

[@Papirrin-di8cy]

Don’t use it then

[@leer.9641]

It’s not very noisy. Put ear plugs in.