Could you install this with a 3” leveling strut instead of the preload spacer to make it ride a little better or are you better off just piecing it together at that point?
I have this installed on my truck and beware it comes with 3in front spacer and 1in rear and the rear does squat some so truck does not look leveled if you buy this buy a 1.5 - 2 in rear level or
I just got this for my 2018 bighorn it's a 3" lift kit same on the video I'm not shore about the rear spacers they look kinda weak compared to some others I recently looks at Did you change the spacers for this kit please let me no before I install...thanks
I have a 2019 ram 1500 classic single cab, stock. I need a little more height and put bigger tires under it for my needs. I don’t want to affect how it rides, but want to raise it about 4” with a suspension lift. What would y’all recommend?
actually should measure from the center of the hub/hub cap or from the lip of the rim, tire height can vary based on tire pressure, measure from the rim and you get a true measurement of lift, measure from ground for ground clearance
Kristopher Olson this was probably the dumbest thing I’ve read. If you measured to the hub it’d only show you how much it cam up from the tires. Not the lift. Also ground clearance is measured at the lowest point of the truck which is usually the front diff.
Just bought this lift, looking forward to getting it installed. Is there a reason that only the upper A arm needs to be replaced? Does the increased front end angles not affect the lower arms as much?
Why did he say that the fact that there is no differential drop isn't the greatest thing? I am looking to possibly buying this kit but I also want to make sure that it won't put any extra wear and tear on the truck.
The angles were a little steeper than stock, anything over 3" we do recommend getting a kit with a differential drop but the CV angles were still not too bad!
Heres a link to our gallery of Ram 1500s with 3" lifts and 35s check it out and see what everyone got to fit! www.customwheeloffset.com/wheel-offset-gallery?order=year&make=Ram&model=1500&year=2017&suspension=Suspension%20Lift%203%22&tire_height_from=35
Custom Offsets What’s the offset, rim size, tire size and offset on this? I want to put 20x10x-12 with 5” backspace and 33”x12” tires would that fit this kit without any rub?
305/55R20 Amp Terrain Attack AT! You can check them out here! www.customwheeloffset.com/buy-wheel-offset2/305-5520AMP+CA3/fuel-assault-18-amp-terrain-attack-at-a-305-55r20
I'm still trying to understand all things that deal with lifting and leveling. Do all lift kits level? I've got a 2014 Ram, 4X4 with hemi (if that matters. Looking for 3" kit. Also, do you offer a rim,wheel and lift kit?
Just had this kit installed. It makes the front of my truck sit about 1/2 in higher than their rear. What can I get to correct that ? I imagine since the rear uses a 1 in spacer would I just need a 1 1/2 in spacer to get it perfectly level ?
If you do go with fox get the dsc adjust coilover . i got the race series just nitro charged and yeah theh are bit firm on every day riding but get better at high speeds and offroad
@@mattward330 do you have the 5100’s front and rear with this 3” Kit? I’m considering getting this kit but going with Bilstein for the rear then possibly swapping the fronts in later on.
Is no differential drop bad? And is this bolt on kit better than a regular 3 inch leveling kit? I'm worried about the control arm angle damage. Or is it not such a problem to worry about.
Any kit over 3" we recommend getting one with a differential drop bracket to avoid the bad CV angles. And this kit would come with more material to help with better angles as well!
Yea you can even run up to 35s on a level truck but you won't have any flex at all........can any one can tell me how wide I can go on a stock 20 inch rim?
-18 offset! Check out more of this truck here! www.customwheeloffset.com/wheel-offset-gallery/390507/2017-dodge-ram-1500-fuel-assault-rough-country-suspension-lift-3in
Dylan Striegel I ended up going with ready lift 69-1036 (2.5” front and 1.5” ready) I wanted the ass end to be slightly higher for towing (not that I tow much lol)
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
1:49 before lift 5:01 after lift
thank you
MVP
Just got this kit a couple weeks ago. Definitely recommend it! Truck rides like stock and has an awesome appearance to it.
330 Outdoors-Gabe Duvall how much was it and where did u get it from?
khyoon14 It was like $600 from Amazon.
ok thanks. unfortunately i have a 2wd... will it work for me?
khyoon14 Negative
330 Outdoors-Gabe Duvall why not get it directly from RC?
During the video you say it will make the ride “stiffer”. Can you provide an update on how the ride was after the install?
It would be nice to get fender height measurements before and after on these videos. Love the content though!
Can you do a full step by step video install for this lift?
They don’t do that at custom offsets because they’re not getting business that way
Could you install this with a 3” leveling strut instead of the preload spacer to make it ride a little better or are you better off just piecing it together at that point?
I have this installed on my truck and beware it comes with 3in front spacer and 1in rear and the rear does squat some so truck does not look leveled if you buy this buy a 1.5 - 2 in rear level or
I just got this for my 2018 bighorn it's a 3" lift kit same on the video I'm not shore about the rear spacers they look kinda weak compared to some others I recently looks at
Did you change the spacers for this kit please let me no before I install...thanks
So go 2" spacer in the rear I'm using 33x12x50x22 rim and tires
I have a 2019 ram 1500 classic single cab, stock. I need a little more height and put bigger tires under it for my needs. I don’t want to affect how it rides, but want to raise it about 4” with a suspension lift. What would y’all recommend?
Will this rim/tire package fit on the stock suspension without rubbing / trimming plastic?
You guys should do a measurement before and after. Tape measure from the ground to the fender that way we can see how much it really came up.
Hemilover By 2 inches lol
actually should measure from the center of the hub/hub cap or from the lip of the rim, tire height can vary based on tire pressure, measure from the rim and you get a true measurement of lift, measure from ground for ground clearance
Kristopher Olson this was probably the dumbest thing I’ve read. If you measured to the hub it’d only show you how much it cam up from the tires. Not the lift. Also ground clearance is measured at the lowest point of the truck which is usually the front diff.
I would guess 3in higher in the front and 1 in the rear. Just a wild guess
I prefer the lifted strut rough country N3! No spacer 💪🏽with updated upper control arms !
have this kit and it rides just like stock it does appear rear sits lower than the front which is annoying not sure how to fix it correctly
I want to see the cv shafts.
Same
I cannot get the upper strut spacer lined up with the hardware provided. Is there a write up or some pictures?
Send an email to info@customoffsets.com and they should be able to see what they can do to help you out!
Can i fit 285 60 r20 on my truck with this kit with no rubbing i have 2014 ram 1500 Laramie thanks.
Check our gallery out for fitment help - bit.ly/2IdL2S2
Yes you can... stock height this tire will work too
Why will these upper control arms not work on a 2011 ram? I can’t seem to get an answer from rough country
Can you do a Tuff Country 4” for the Ram also?
I have the same truck and want this lift kit and those wheels and tires do you have a link to buy all that?
Link is in the description! 🙏🏻
Custom Offsets I see the lift kit but not the wheel and tire package I'm new to trucks and all theses wheel tire combo got me confused
Here is the link! bit.ly/2xVxNoW
Custom Offsets are those tires all terrain? I don't want mud tire
Are those 33's?? Also is it possible to buy this set up but without sticking out so far from t he fenders etc???
Now that's a head turning jaw dropping truck
Just bought this lift, looking forward to getting it installed. Is there a reason that only the upper A arm needs to be replaced? Does the increased front end angles not affect the lower arms as much?
Correct. Just affects the uppers!
@@CustomOffsetsTV thx for the reply
Why did he say that the fact that there is no differential drop isn't the greatest thing? I am looking to possibly buying this kit but I also want to make sure that it won't put any extra wear and tear on the truck.
How much to have 3” lift for a ram 1500 big horn lone star .2020 and can I keep original tires?
Check here! customoffsets.com/suspension
Can anybody recommend a 4” Lift for my 2wd Ram 1500 . I want it to ride like stock. That’s my main goal . Smooth ride
Shoot us an email to info@customoffsets.com and our sales team can help you out !
Go buy a 4wd poser
Dalton Woods don’t need a 4wd thanks !
evazquez4321 lol 😂
Okaaay tough guy. Who doesn’t need 4wd lol
Dalton Woods nobody is trying to be tough lmao 😂 . I live in the city and there’s no snow here : so yeah . Not really necessary
will this make the front slightly higher I have the rough country 2.5" leveling kit and I'm a half inch higher in the front. I like that look.
Lift kits are different then leveling kits Jacque. Leveling kits only do the front, this is a lift kit!
Tires and wheels?
I just ordered these wheels tire kit is there anything else I need to bolt them up???? I have this lift kit
Check out the gallery for any fitment questions you have man! You can filter by what you are trying to run! customoffsets.com/gallery
Before and after pictures side by side would have been good idea.
Is this lift practical if I take my truck off-road frequently?
they do Fine, as long as you're not piss pounding your truck
How were the angles? I was expecting you to show that
The angles were a little steeper than stock, anything over 3" we do recommend getting a kit with a differential drop but the CV angles were still not too bad!
That's a nice clean truck right there! 👌
Will that 3" lift fit 35's in the rams?
Heres a link to our gallery of Ram 1500s with 3" lifts and 35s check it out and see what everyone got to fit! www.customwheeloffset.com/wheel-offset-gallery?order=year&make=Ram&model=1500&year=2017&suspension=Suspension%20Lift%203%22&tire_height_from=35
Custom Offsets
What’s the offset, rim size, tire size and offset on this? I want to put 20x10x-12 with 5” backspace and 33”x12” tires would that fit this kit without any rub?
What size tires you running
305/55R20 Amp Terrain Attack AT! You can check them out here!
www.customwheeloffset.com/buy-wheel-offset2/305-5520AMP+CA3/fuel-assault-18-amp-terrain-attack-at-a-305-55r20
I'm still trying to understand all things that deal with lifting and leveling. Do all lift kits level? I've got a 2014 Ram, 4X4 with hemi (if that matters. Looking for 3" kit. Also, do you offer a rim,wheel and lift kit?
Hellllllll yesss we do! Shoot us an email sometime fam and we can help you get setup!
i notice your running the fuel assault rims. what size tire and what brand is it?
Here is the link! bit.ly/2xVxNoW
Custom Offsets Thanks!
How much does the rear axle shift since there is no drop bracket for the track bar?
Negligible amount
So is this a good lift kit for a non towing non off road daily driver truck?
Yes it is a good budget friendly option!
Custom Offsets what tires and wheel.combo do you have that don't stick out so far?
Check out the gallery to find the look you like! customoffsets.com/gallery
Just had this kit installed. It makes the front of my truck sit about 1/2 in higher than their rear. What can I get to correct that ? I imagine since the rear uses a 1 in spacer would I just need a 1 1/2 in spacer to get it perfectly level ?
Cooper, please send an email to info@customoffsets.com and they should be able to help you out and decide what needs to be done!
How much would this kit plus installation cost? Thinking about doing this to my 1500 Sport
Email us at info@customoffsets.com if you are looking to have it installed by us.
Do fox shocks really make a difference in the ride quality
From what I've heard they ride pretty rough. The bilstein shocks are what I've had and they ride good.
If you do go with fox get the dsc adjust coilover . i got the race series just nitro charged and yeah theh are bit firm on every day riding but get better at high speeds and offroad
@@mattward330 do you have the 5100’s front and rear with this 3”
Kit? I’m considering getting this kit but going with Bilstein for the rear then possibly swapping the fronts in later on.
Is no differential drop bad? And is this bolt on kit better than a regular 3 inch leveling kit? I'm worried about the control arm angle damage. Or is it not such a problem to worry about.
Any kit over 3" we recommend getting one with a differential drop bracket to avoid the bad CV angles. And this kit would come with more material to help with better angles as well!
How come I can no longer find this kit anywhere?
It's in the description.💨💨💨
What happens when you tow something heavy? Front tips up and springs fall out?
Nope! Be just like factory Johnny
How do the CV shaft angles look with this lift?
Good Layton!
@@CustomOffsetsTV how good????
How would a bds 4.5 on a 02 Silverado with 355/40r22s fit ? Still rub?
Ray, check our gallery out for fitment help - bit.ly/2DgLW0N
That's a nice truck
Can I use my stock struts and shocks? Got 32k miles on them stock suspension
If there is nothing wrong with them keep them!
What size wheels are those?
Fuel Assault 20x10 -18 Amp Terrain Gripper At G 305/55! Check out more of this truck here!
bit.ly/2LnLoKV
Custom Offsets did they rub?
I have the same lift I have to install. Lol what size tires is that truck running???
305/55R20
Can the rams run 305/55r20 with a leveling kit?
Yea you can even run up to 35s on a level truck but you won't have any flex at all........can any one can tell me how wide I can go on a stock 20 inch rim?
35s
Sorry you could run 35s
Brad smack that fly
i wonder if he licks his fingers when eating,he looks like a finger licker add some fly smash and voila we got one tasty finger
Whats the offset of thos rims, they look perf
-18 offset! Check out more of this truck here!
www.customwheeloffset.com/wheel-offset-gallery/390507/2017-dodge-ram-1500-fuel-assault-rough-country-suspension-lift-3in
Custom Offsets sweet!! i know ill be ordering this kit soon 😎😎
Looking for levelin ng kit for my 2010 ram trx4 ?
Check 'em out here- bit.ly/2gxY8hu
I have the same truck !!
How much lift in the rear?
This is with the 3" RC installed with the rear spacer that comes with it.
Aristeidis M 1in leaves the truck with a slight squat
Dylan Striegel I ended up going with ready lift 69-1036 (2.5” front and 1.5” ready) I wanted the ass end to be slightly higher for towing (not that I tow much lol)
Gross... amps
Can u fit 20x10 -24offset on 3inch lift??
What kind of rims are those?
Fuel Assault