Thank you ! On the new by where you put the hose and water hose coming in theirs a little nipple sticking out 1/2 inch. What’s it’s purpose my blew off and leaking pressure and water through there can I replace it ?
@@MichaelOngay I believe it's replaceable but you would need to contact Ryobi directly about a part. I don't think you can get a full replacement unless you replace the entire pump body which i think would be a little much. You can get a pump body from Yamatic i think. But it wouldn't be as good
In California the gas pumps say "may contain you to 10% ethanol. Can I put the gasoline straight from the pump into my container and into my Ryobi? I have this exact model.
@@josevillanueva9705 Great question! According to the manual, you are suppose to use premium fuel up to 10% ethanol. DO NOT USE E15 or E85 fuel. It will damage your engine. Please subscribe and share my channel ! thx
@@talkingwithcars thank you man just picked this washer up today I’ve seen some mixed reviews on it but it fit in my budget, hoping it works well and last for me
@@blxkem1185 I like it....it's very powerful and cleans up the house very well. It's a little too powerful for the car but you could use a larger hose and larger orifice nozzle to tame it down....but honestly, I would get the $99 dollar Ryobi for that...or an Active 2.0 for that function.
@@talkingwithcars yeah i just got it a week ago today i went out to use it and it just doesn’t start. it pops from the exhaust like it wants to but doesn’t an will have some smoke come out when i pull to start it as well
Fair question but for me. I was making the actual pump and results better by using a better hose and wand. The results would be similar enough if you wanted to use their hose and wand. First of their hose that comes with it is rigid and doesn’t flex. So you’re always fighting it. Look at my latest 1800psi Ryobi unit review. I used the hose from this and it sucked. Immediately replaced it. And the wand is plasticy and not really what I want to use. The unit itself is what I’m reviewing. And it’s good.
@@jimmyjones121 It's ok. not as easy as an electric for sure. But always remember to discharge pressure before you pull. good luck ! keep me posted and subscribe ! thx
Great video. I need help. Pull start cord rips out of my hand when i attempt to pull / start it. Does anyone know why and the fix? Its been a year and I'm still at a dead end. Ryobi GCV 190 3100psi 2.5 GPM
HI not showing it using the wand that comes with it is a pointless review. Watched you video to see the wand that actually came with the product no some other wand you had in your garage
![Ryobi 3100 PSI 2.3 GPM Honda Pressure Washer & Surface Cleaner Review [shot on DJI Pocket 2]](http://i.ytimg.com/vi/S4uhoo-1JMI/mqdefault.jpg)
![Ryobi 3100 PSI 2.3 GPM Honda Pressure Washer & Surface Cleaner Review [shot on DJI Pocket 2]](/img/tr.png)
I thought before you turn on the engine you had to get all the air out of the garden hose and pump😮
That’s ideal. Sometimes you just simply don’t have time or it’s in the pressure washer lines themselves. Good question
That is the model I am picking up tomorrow. Early birthday present for myself.
@@yobentley7274 cool! let me know how you like it !
@@yobentley7274 have a great 4th
Thank u very much awesome video, question does it take regular feul?
Thx !! Yep. I usually put premium in the small engines.
@talkingwithcars Goodmorning, really I thought regular
@@georgeboultadakis8530 you can run on regular. I use premium for better burn.
Thank you ! On the new by where you put the hose and water hose coming in theirs a little nipple sticking out 1/2 inch. What’s it’s purpose my blew off and leaking pressure and water through there can I replace it ?
@@MichaelOngay I believe it's replaceable but you would need to contact Ryobi directly about a part. I don't think you can get a full replacement unless you replace the entire pump body which i think would be a little much. You can get a pump body from Yamatic i think. But it wouldn't be as good
Hose it comes with is way better than the blue one I have exact same and blue doesn’t last
@@jandelahoussaye9834 the one it comes with is sturdy just rigid. i changed out the blue with the red. been happy ever since.
In California the gas pumps say "may contain you to 10% ethanol. Can I put the gasoline straight from the pump into my container and into my Ryobi? I have this exact model.
@@josevillanueva9705 Great question! According to the manual, you are suppose to use premium fuel up to 10% ethanol. DO NOT USE E15 or E85 fuel. It will damage your engine. Please subscribe and share my channel ! thx
@@josevillanueva9705 manual -
556aa8d9de68ea9c4f29-0a8acad11a4df5016d26cc39a7429843.ssl.cf1.rackcdn.com/2/RY803023_090079512_582_trilingual_02.pdf
Do you happen to know what oil to get that works best for this unit once the sample oil runs out ?
good question. the manual indicates to use SAE 30. and if you have to. 10W30.
@@talkingwithcars thank you man just picked this washer up today I’ve seen some mixed reviews on it but it fit in my budget, hoping it works well and last for me
@@blxkem1185 I like it....it's very powerful and cleans up the house very well. It's a little too powerful for the car but you could use a larger hose and larger orifice nozzle to tame it down....but honestly, I would get the $99 dollar Ryobi for that...or an Active 2.0 for that function.
I hope used all of the oil it says to pour all 12 ozs
You can take the handle off to fill gas
Yep. I sold this one a while ago.
@@talkingwithcarsyou didn’t like this pressure washer?
@@Coleburgess09 I like it. But it’s a little heavy and cumbersome for simple tasks like washing a car. Perfect for house and sidewalks etc.
@@talkingwithcars okay cool so you were happy with the quality just not how big it was I get that. How did it perform with foam cannons?
@@Coleburgess09 very good. Plenty of GPM
mine is brand new an still won’t start
New and won’t start? What? Return it
@@talkingwithcars yeah i just got it a week ago today i went out to use it and it just doesn’t start. it pops from the exhaust like it wants to but doesn’t an will have some smoke come out when i pull to start it as well
@@Kreel12 let me know how it goes. And if you end up with an electric one.
How are you going to "review" something and use different parts?
Fair question but for me. I was making the actual pump and results better by using a better hose and wand. The results would be similar enough if you wanted to use their hose and wand. First of their hose that comes with it is rigid and doesn’t flex. So you’re always fighting it. Look at my latest 1800psi Ryobi unit review. I used the hose from this and it sucked. Immediately replaced it. And the wand is plasticy and not really what I want to use. The unit itself is what I’m reviewing. And it’s good.
Appreciate the vid. Instructive.
Thanks! Much appreciated!
Many other videos coming.
Was it hard to start
@@jimmyjones121 It's ok. not as easy as an electric for sure. But always remember to discharge pressure before you pull. good luck ! keep me posted and subscribe ! thx
Great video.
I need help. Pull start cord rips out of my hand when i attempt to pull / start it.
Does anyone know why and the fix? Its been a year and I'm still at a dead end.
Ryobi GCV 190 3100psi 2.5 GPM
@@donl3381 usually it's due to pressure in the line not the engine. always release the pressure using the gun and try again.
HI not showing it using the wand that comes with it is a pointless review. Watched you video to see the wand that actually came with the product no some other wand you had in your garage
Fair enough. The wand it came with is pretty standard. But I get it.