Cleaning a Pellet Grill - Yoder YS640s
HTML-код
- Опубликовано: 7 авг 2020
- Today, we are cleaning a pellet grill. In my case, it will be a Yoder YS640s, but this applies to almost every pellet grill on the market.
A pellet grill needs to be cleaned out more often than other types of grills. Sometimes, it worries people that too much maintenance is required as part of owning a pellet grill.
In this video, I will show you how easy cleaning is. In most cases, it takes less than 15 minutes. It requires some basic tools and products.
▶️ Free Download - 11 Secrets to More Smoke on a Pellet Grill: www.pelletgrillsecrets.com
📢 The following partners and supporters support my channel and offer you a discount. I only work with partners I 100% believe in, and I pride myself on being able to work with some of the best partners in the BBQ community.
Please support them and the channel by taking advantage of my links and discount codes listed below:
🙏PARTNERS🙏
▶️ Yoder Smokers: bbq.rumandcook.com/YoderSmokers
▶️ Komodo Kamado: bbq.rumandcook.com/KomodoKamado
▶️ All Things Barbecue: bbq.rumandcook.com/atbbq - Save 11% on sauces and rubs: RUMANDCOOK11 - Save 11% on sauces and rubs with code: RUMANDCOOK11
▶️ ChefsTemp: bbq.rumandcook.com/ChefsTemp - Save 25% with code: RUMANDCOOK
▶️ MannKitchen: bbq.rumandcook.com/PepperCannon - Save 10% with code: RUMANDCOOK
▶️ Meat n Bone: bbq.rumandcook.com/meat-n-bone - Save 10% off first order: RUMANDCOOK
⭐SUPPORTERS⭐
➡️ Bear Mountain BBQ: bbq.rumandcook.com/BearMounta...
💲 ADDITIONAL PRODUCTS AND DISCOUNT LINKS 💲
🔸 ACF-50: bbq.rumandcook.com/ACF-50
🔸 Citrus Grill Cleaner: bbq.rumandcook.com/Citrusafe
🔸 Grillblazer: bbq.rumandcook.com/GrillGun - Save 10% with code: RUMANDCOOK
🔸 Fifth And Cherry: bbq.rumandcook.com/FifthandCh... -Save 15% with code: RUMANDCOOK
🔸 LIZZQ Pellet Smoker Tube: bbq.rumandcook.com/SmokePelle...
🔸 MEAT! Processing Products: bit.ly/MEATYourMaker
🔸 Nitrile Gloves: bbq.rumandcook.com/BestNitril... - 40% discount is shown at checkout.
🔸 Sheila Shine (Stainless Steel Cleaner): bbq.rumandcook.com/SheilaShine
🔸 Sprayer: bbq.rumandcook.com/Sprayer
🔸 ThermoWorks: bit.ly/ThermoWorksOne
🔸 Zep 505 (Amazing Degreaser): bbq.rumandcook.com/Zep505
🛒 AMAZON STORE 🛒
🔸 amazon.com/shop/rumandcook
* Some of these links are affiliate links. Affiliate links allow me to earn a small percentage of sales (you pay the same price), which helps support the channel.
-------------------------------------------
💡 FIND MY VIDEOS HELPFUL? 💡
-------------------------------------------
✔️Subscribe to my channel: bit.ly/RumandCook
✔️Send a Super Thanks 🤑
✔️Join my Patreon: / rumandcook
✔️Watch More Videos:
• Yoder Smokers YS640s V...
• Yoder Pellet Grill 101...
• Yoder Smokers Wood-Fir...
• Alfa 4 Pizze Wood-Fire...
• Komodo Kamado Big Bad ...
• Kamado Joe Big Joe Ser...
• Kamado Joe 101 Basics
✔️Follow Me:
➟ / 1rumandcook
➟🌐: www.rumandcook.com
🡆Contact:
➟📧: 1rumandcook@gmail.com
🔥 MY GRILLS 🔥
Alfa Pizza Oven: bbq.rumandcook.com/Alfa4Pizze
Yoder YS640s: bbq.rumandcook.com/YS640s
Komodo Kamado Big Bad 32: bbq.rumandcook.com/KomodoKamado
Lynx Professional: www.lynxgrills.com/profession...
Workhorse Pits 1975: www.workhorsepits.com/product...
#yodersmokers #pelletgrill #pelletgrillcleaning 
Хобби
Appreciate the videos man. New subscriber here, & great content! Looking forward to watching more, thanks.
Thanks, I appreciate it! 🍻
❓ *What video do you want to see next?* 🍻
Will the Sheila Shine clean a "soiled" grease shield or should another cleaner or cleaning method be used before using the Sheila Shine? My grease shield look like it has a fair amount of grease drippings and possibly discoloration from heat.
No, use something like Bar Keeper’s Friend. It will take that right off. Go with the grain. Should be some in my Amazon store. 🍻
👍👍
Thanks!
Hi - Which vacuum do you use? I didn’t see it listed in the description.
The one I was using is a high end FesTool, but that’s really overkill. I have it for my cars.
I recently switched to the Home Depot bucket head shop vac. It attaches to a 5 gallon bucket. Cheap and gets the job done.
Very Informative video and helps for making my mind up about the Yoder. ....... Any issues regarding temp fluctuations on a long smoke.
Thanks, darker video than I would have liked.. figuring out lights in my newer videos :) Not a huge amount. Pellet grills will fluctuate just by the nature of their design vs a lump charcoal cooker. This is because the pellet feeding speed is constantly being adjusted. That being said it's nothing that I have worried about or felt affected my cooks. If you start to see large swings, there is a test that Yoder support will ask you to run, and they may ask you to adjust the offset in the ACS a bit.
That being said, I don't really feel a temporary swing of temp in any cooker has a huge effect on your outcome. Die hards will say it does, but they also used to say you couldn't cook a 14 pound brisket in under 6 hours and have it be delicious.
@@RumandCook I am running a Bradley Smoker right now and experience huge fluctuations in the temp of the unit. I have I have a thermometer set up double probes to monitor the meat and the inside of the Bradley. I see 50 -75 degree swings in what the unit says its at and the probe says it is and make adjustments when needed. You are right...... the end result works out fine and no one is complaining when its on the plate. Thanks for your reply and keep up the good work
@@johnminke4542 Thanks! Yeah 75 degrees is a big swing. I don't see that on low and slow, maybe 20-30. On high temp sessions I see swing, but usually I'm opening and closing the lid a lot + searing near the end.
I love your content and videos.
I'm narrowing down options and am between Yoder and Pitts and Spitts.
I'm worried about the 'rust issue' I keep reading about on the Yoder but think the wifi included on Yoder YS models is a huge plus.
For Pitts and Spitts I love that it's stainless steel and all welded but wifi is extra.
Do you have any thoughts on choosing one out of these two units? Is the Yoder rust issue overblown? How good is the wifi?
Thanks for your efforts and thorough videos - subbed!
Tough call to be honest. I like the stainless myself.
The rust issue is really just surface rust. My understanding is that it’s a quick hand sand and then just spray the black paint back on it. Mine will be 2 years old this summer and will be doing some videos on this process in the spring.
I will say the wireless is very handy. It’s one of the reasons I added a pellet smoker back in the mix. I like being lazy from time to time and being able to adjust temp/monitor food temp remotely.
The Fireboard app is basic, but rock solid and haven’t had any issues with it.
They are both good units so I can’t really encourage you one way or the other.
Sorry I can’t be of more help. Thanks for watching!
@@RumandCook One more question for you - do you make use of the variable damper on your YS640s?
Trying to decide between the 640 or the 480. Size wise, the 480 is plenty of grill for our use case but if the damper makes a big difference on the 640 I might make the step up.
Any insights?
I almost never use the damper. It sits in the middle 99% of the time. Don’t waste your money on the 640 if you don’t need the space.
@@RumandCook Thank you for the great info!
No problem, happy to help!
What would you suggest to use to clean the outside, both the black smoker box or the cart underneath?
CitrusSafe works well. Zep 505 is good if you need something heavier but try CitrusSafe first. I have links in my Amazon store in the description. 🍻
Was that a Festool Dust Extractor that you used to vacuum out the ash?
Yep. Someone knows his tools 😆. I mainly use it for my cars.
What grease bucket inserts did you get for the Yoder bucket?
You can find them on Amazon or check my Amazon store in description. 🍻
I have to ask…. How does that damper rod work??! You slid it back and forth and the rod disappears into the aether??
The rod moves a damper plate in the bottom of the cooking chamber. All the way in makes it hotter on the left, all the way out makes it hotter on the right. 🍻
The zep 505 is safe to use on inside the grill? Or requires you to rinse after?
I wouldn’t use Zep on the inside. I’d only use a scraper. If you need more power a Citrix based cleaner would be better. 🍻
@@RumandCook oops I already did over all the cooking surfaces.. Is it toxic? Saw another guy spraying it inside..
Yes it’s toxic. You will be fine as long as you wash the grates with soap and water before cooking on them.
Thanks. Worked well. I do see some surface rust on the auger at the bottom of the hopper. Is that normal? Any way to address?
If you are talking about inside then you can spray some pan or canola oil inside. Don’t go too heavy and wait until you can run it at 350-400 for a couple hours.
If you are taking externally, check my link below and pick up some ACF-50 (I have a couple rust prevent videos) and put a coating on it. That will stop the spread.
I’d wait until it spreads more and then lightly sand one side, tape it and spray the whole side. It doesn’t blend in perfectly unless you do a complete section.
Thanks for watching. 🍻
@@RumandCook Thanks for the quick response. The rust is on the outer edges of the helical screw that pushes the pellets. I’ll definitely try the canola oil to control. I live in the northern part of New York a few hours from the Canadian border and the smoker will be out on my deck year round under the factory cover where I plan to smoke year round.
No prob. You will prob want a thermal jacket as well. Check out my recent one of that. It works way better than I expected.
@@RumandCook That jacket is definitely on my radar. Thanks again for your help and instructional videos. Just switched from an electric smoker using wood chips to pellet for the wider temperature capability and automated wood addition.
No prob. Happy to help!