Ah you’re a diamond.. yeah you’re.absolutely right, can be challenging.. but so rewarding, and satisfying 😆 ..Take care my friend, hope you’re having success 👏👌👍💯
Haha, you’re so kind brother.. It was a week long project.. prep, rad, fire surround, trim, walls, ceiling 🙈 ..Hope you’re having plenty of success my friend 💯
Good job Pete, it's so quick once your masked & ready to go 😊 definitely outways rollering hey. I'm still not keen on the dramatic music, have to watch with the sound low or off... but each to their own 👍
Always great content mate. Do you spray and roll final coat to allow for touch ups? How much more on average do you allow for paint when spraying a normal size room ( walls & ceiling) compared to brush and rolling. Keep up the fantastic work.
Hey Brian, really appreciate your feedback.. that’s a good question.. my plan here was to do exactly that, backroll the final coat.. but there was a texture on the wall, from the initial build and years of painting (which I machine sanded a lot during prep).. I found the sprayed finish really helped smooth out the walls but not so much that I felt future touch ups would be an issue.. Transfer efficiency of typical Airless spraying is poor. So you need to allow for the ‘waste’, roughly you’ll use 30-40% more material.. these HEA tips and low pressure spraying really help minimise waste.. to give you an idea, to complete this medium size lounge, I used 5 litre 👍 ..Great to hear from you Brian, hope you’re keeping well and having plenty of success.. regards Pete
Nice job mate I use HEA tips all the time a 517 I can't praise them enough even on new skim no lap lines I set up at 1500psi how did the anti reflex dry I have brush and rolled and finish was good so I think spraying it would be flawless cheers
Hey buddy, great feedback thank you.. Yeah AR2 through an airless is awesome, dries a dead flat matt.. benefits from a drop of water just to ease the flow, sprays a little higher at 1700 psi with a HEA 515.. but in my experience still lower than Graco LP tips .. appreciate your contribution to the channel, keep in touch my friend.. regards Pete
Graco LP tips aren't really low pressure I have known them to atomise at nearly 2000psi kind of defeats the actual object of the tip to be fair but the FFLP tips are great totally different do exactly what they should do have you used them at all mate
Yeah I totally agree buddy.. FFLP are pretty much my go to tips for trim / woodwork.. in this video ruclips.net/video/wZ8cPWMD9N8/видео.html ..I do a comparison between an FFLP 208 and the TriTech Uktra 208 👍 The atomisation around 800 / 900 psi using the FFLP is just a joy to spray with.. total control 😆
Why not just spray the ceiling first but when doing walls cut in with brush, then spray walls using a shield back backroll the walls with a large roller and cut in with brush and roller to match it. Saves loads of times on prep no?
Hey Dan, thank you buddy.. you could go straight away (I know it’s common to do that).. I just have a break / a cuppa 😊 ..Then go again ..You don’t necessarily have to cross-hatch either, just like using a roller, if you’re confident in overlapping your passes, all will finish up great 😆 ..Hope that makes sense my friend.. all the best ..Pete
Hi Pete, recently found your excellent channel and subscribed. One question if I may. I bought the Hea pro tip 515 and Wagner trade 3 guard. I put the tip in the guard I was expecting it to lock in the spray position and unblock position. Im guessing different tip manufacturers do them differently. I tried it at 1000psi with water and all worked fine. Initially I thought have they sent me the wrong tip ie have they sent me the control pro tip. Which I saw you warned about on another post. I guess it’s me just used to using the Greco FFtips. Cheers Pete.
Hi Pete, Another great video, thank you for posting it - I have a couple of questions: Is that a 3/16ths hose you are using? It looks a lot more flexible than the 15m ¼” Wagner (Control Pro 350M) hose I’m stuck with (which is a real pain!). Is the Q1 1” tape your go-to when using the hand masker? I had a lot of trouble recently with masking film where the tape rode off the top of the film. I had to keep starting again and overlapping/vertical-sealing the joints. Finally, when masking the edge of carpets, against trim, do you lift the masking immediately after spraying? I’m thinking specifically about stair carpets that go full width. Many thanks for all your posts, I’m slowly getting the hang of it and just looking for ways to reduce prep time! With best wishes, Rob
Hello Rob my friend.. yeah it’s a 3/16” 7.5 metre hose, much more manageable.. but still drives me mad when it gets twisted up 🙈 ..Regarding the tapes, yeah I’ll use Q1 1” multi purpose as a cost effective solution on the hand masker.. the only time I switch to Deltec Gold 1”, is in conjunction with 12” brown paper and I’m making the finished line on trim / skirting / architrave etc.. in this example, you can run the guard along the wall and get the perfect / even gap all round.. just check you’ve got the blade on the 1” / 25mm ‘setting’.. you may need to unclip the blade and reseat.. if it’s on the wrong setting, not matching the tape, you get what you describe.. tape running off your plastic or paper 🙈 Tapes on carpet, I generally use the 2” / 50mm SP80 green (Q1 general purpose is good also, both cost similar).. then I wait for the sprayed stair stringers to dry down a bit, sometimes even totally dry.. just don’t want to snag the fresh wet paint work.. If totally dry check the dry paint hasn’t bridged 👍 ..hope that covers everything buddy, all the best.. Pete
@@PaintHQ Hi Pete, so you trust Deltec Gold on newly painted trim? I was using purple (delicate) and then tape + paper over the top of it - you might have just saved me 50% time on this alone! I’ve changed the blade length, up and down, many times until I couldn’t see that the relationship mattered so left the blade on 36mm and was using 24mm tape when the problem arose - I’ll be sure to change it in future. Many thanks for these and all the other “nuggets”. Best wishes, Rob
You’re very welcome Rob.. yeah to confirm, if I spray trim, the next day I’m very confident to mask with Deltec Gold on the hand masker with 12” paper.. use the blade edge (with the blade set on 24mm) as your guide.. yeah it’ll be quicker my friend.. I only use Deltec Purple to mask the ceiling line.. or to mask old paintwork that I haven’t painted.. eg if I’m doing a lounge, masking the door frame to the hallway 👍 Keep in touch buddy.. regards Pete
Ah you have a great machine in the 440i my friend.. I rate and often recommend the HEA 515 ..Wagner HEA ProTip / Titan TR1 HEA 515 spray tip ..With Wagner owning Titan, both these tips are the same 👍 great to have your contribution on the channel, keep in touch.. regards Pete
hey mate i brought 350r 3 weeks ago come with standard gun tips ect i have been useding for last 3 days i cant get on with the gun its the handle im looking at wagner vector pro do you know if the gun fit the tips come with my machine?
Hey Gareth, great news on your success spraying 👏👏👏 ..Unfortunately I don’t believe any of the ‘pro’ guns / fittings will fit the ControlPro range of sprayers.. check out this video, I demonstrate the incompatibility using the 250M ruclips.net/video/3Mlzp37Uepg/видео.html ..By all means, double check with your sales vendor 👍 ..keep in touch how you get on my friend.. I’m happy to help and advise any way I can.. regards Pete
Hi Yaniel, thank you for your question 👍 ..It’s a Graco 395 Airless Paint Sprayer, with a hopper kit.. oil / solvent based materials will go through airless, like any sprayer you just need the appropriate cleaner to flush the unit after.. I wonder if a air spray / HVLP system would be more suitable if you’re solely looking at spraying fine finishes with oil based.. like I say, airless will spray it and the finish is very very good with fine finish spray tips.. advantage of airless is you could also spray emulsions.. walls / ceilings 👍 This playlist shows the use and setup of an air spray system.. with a pressure pot.. you can also use gravity and siphon guns 👍 ruclips.net/p/PLsoto1xN8d08JHi4iCK6c1CoshB6aC7XF A nice little airless machine by Graco, if you’re more looking at trim / woodwork paints with the odd ceiling etc.. is the GXFF (maybe called GX19 depending where you’re located).. there’s sone excellent water based trim paints, rather than oil.. if that’s a possibility also.. hope this helps my friend.. keep in touch.. regards Pete 🎨💯
I’m happy to help any way I can, don’t worry about any broken English.. you’ve done very well my friend.. with airless spraying, I don’t typically look to thin the paint.. although a very small amount does help ease the ‘flow’.. so I’d say in this example, about 4 litres is in the hopper and I’d add about an ‘egg cup’ full.. just a splash of water 👍 give it a good stir and you should notice the consistency (viscosity) is a bit easier / free flowing.. just helps lowering the pressure by about 100 psi.. it makes a big difference.. more control, and less bounce back 👍 ..keep in touch, happy to help anytime 👍 ..regards Pete
Hi Naur, really appreciate you checking out the channel and giving your feedback.. no problem, you’ll soon home in on the finer details.. I spray a lot of durables but in a matt, so there’s just the slightest sheen Vs flat matt.. anything with too much sheen are more problematic.. Then just double check your setup.. lowest possible pressure to atomise the material and a nice fan with soft edges.. then technique, approx 12” / 30cm from wall, keeping the gun position square to the wall (not pointing up or pointing down).. keep your overlaps 50% to maintain a wet edge.. that should do it brother 😆.. hope this helps, and feel free to keep in touch asking any questions.. regards Pete 🎨💯
@@PaintHQ thanks for the advice 🙏 I'm a painter back in Jamaica on cars no problem but with emulsion paint it's a different thing,I find out with backroll on second coat fix the flashing or when I used johnson full matt there's no problem
Ah that’s cool brother.. I have a friend from Montserrat, who came to the UK due to the volcanic activity on the island.. he goes back as often as he can.. he speaks so lovingly of Montserrat and the Caribbean 👏 ..Spraying cars is a skill and possibly more technical.. sounds like airless spraying, you’ve learnt so much already.. trust me you’ll get their my friend, you’re doing great.. and I’m happy to give any advice, tips and tricks I can 💯 ..Regards Pete
Hi Lisa, this was on previously painted walls.. crazing can occur if the coat is applied (sprayed) too thick / too quick between coats / or dried out too quick ..It’s not a nice scenario 🙈 Hope this helps a little, keep in touch.. regards Pete 🎨💯
@@PaintHQ Ive had it recent when it went on top of matt, i'm thinking it has dried out too quick. Cheers for another reply and another great video, I'm learning a lot from these.
ciao amico mio.. un .010 (come un 210 o 310), è un ugello molto tipico per spruzzare la maggior parte delle finiture / falegnameria / pitture decorative.. per decorativo intendo una vernice che può essere applicata anche con un pennello / rullo .. quindi sì il mio amico un 210 dovrebbe essere molto utile.. quando uso un 208 o 308 sto spruzzando vernice "solo spray" a bassa viscosità / molto sottile / scorrevole.. se sei smalto è "solo spray" quindi userei un 208 / o 308.. o un'altra opzione, usa il 210.. ma muoviti molto più velocemente.. altrimenti potresti ottenere corse (flusso più fluido con un 210 Vs un 208.. spero che questo abbia senso fratello mio ..rimani in contatto, ti risponderò sempre.. saluti Pete
Hey Graham, hope you’re keeping well my friend.. no I don’t get any spits using this setup (Wagner TradeTip 3 Tip Holder and Wagner HEA ProTip).. with the gun alone.. if I uses an extension, like in this video below.. I’d use a CleanShot valve.. ruclips.net/video/vw_e0a6BGuA/видео.html If you’re getting spits with just the gun, the tip guard seat / seal could need replacing.. or the gun needle / seat (packings) could need investigating.. hope this helps Graham.. always great to hear from you.. regards Pete
Ah nice, try a 515 first with emulsion.. I find you’ll be able to dial the pressure down around 500 - 800 psi less than LP tips.. the atomisation is a little courser, don’t be concerned by that, it’s still a nice feathered patten, and less overspray 👍😆 let me know how you get on Enrique..
@@PaintHQ Good morning Pete, thanks for the advice, at the first opportunity I will do it and I will gladly tell you when I have done it. Best regards.
Thanks for the feedback.. feel free to check out my latest videos, I do try to share knowledge, inspire and help as many people as possible 💙 all the best my friend.. regards Pete
Hey Gareth, thank you for your question my friend.. it’s the Graco Contractor PC Compact 👍 ..all guns pretty much have a standard 7/8” thread so tip guards can be interchanged for different brand tips.. in this case a Wagner HEA 515 😆 ..all the best.. regards Pete
![Spray a Room Using Graco QuickShot [& Graco 395] Airless Paint Sprayer](http://i.ytimg.com/vi/F-8VPjDDUHs/mqdefault.jpg)
Hi pete always good too see spraying in domestic work showing it can be done even if it is a bit challenging at times! all the best keep em coming.
Ah you’re a diamond.. yeah you’re.absolutely right, can be challenging.. but so rewarding, and satisfying 😆 ..Take care my friend, hope you’re having success 👏👌👍💯
How happy your customers were with the outcome of this space is testament to all your hard work. Great video ❤️
❤️👰🏻❤️ 💯
As always a pleasure to see the Master at work…..💯💪🏻
Haha, you’re so kind brother.. It was a week long project.. prep, rad, fire surround, trim, walls, ceiling 🙈 ..Hope you’re having plenty of success my friend 💯
Good job Pete, it's so quick once your masked & ready to go 😊 definitely outways rollering hey. I'm still not keen on the dramatic music, have to watch with the sound low or off... but each to their own 👍
Hey buddy, yeah it’s very satisfying to spray.. haha that’s cool, as always I appreciate your feedback my friend 👌👍😆
Always great content mate. Do you spray and roll final coat to allow for touch ups? How much more on average do you allow for paint when spraying a normal size room ( walls & ceiling) compared to brush and rolling. Keep up the fantastic work.
Hey Brian, really appreciate your feedback.. that’s a good question.. my plan here was to do exactly that, backroll the final coat.. but there was a texture on the wall, from the initial build and years of painting (which I machine sanded a lot during prep).. I found the sprayed finish really helped smooth out the walls but not so much that I felt future touch ups would be an issue..
Transfer efficiency of typical Airless spraying is poor. So you need to allow for the ‘waste’, roughly you’ll use 30-40% more material.. these HEA tips and low pressure spraying really help minimise waste.. to give you an idea, to complete this medium size lounge, I used 5 litre 👍 ..Great to hear from you Brian, hope you’re keeping well and having plenty of success.. regards Pete
Thorough.... Once again, thank Yoi!
You’re welcome Beija 😆
Intense video bro, thank you for that
Thank you brother 🙏
Nice job mate I use HEA tips all the time a 517 I can't praise them enough even on new skim no lap lines I set up at 1500psi how did the anti reflex dry I have brush and rolled and finish was good so I think spraying it would be flawless cheers
Hey buddy, great feedback thank you.. Yeah AR2 through an airless is awesome, dries a dead flat matt.. benefits from a drop of water just to ease the flow, sprays a little higher at 1700 psi with a HEA 515.. but in my experience still lower than Graco LP tips .. appreciate your contribution to the channel, keep in touch my friend.. regards Pete
Graco LP tips aren't really low pressure I have known them to atomise at nearly 2000psi kind of defeats the actual object of the tip to be fair but the FFLP tips are great totally different do exactly what they should do have you used them at all mate
Yeah I totally agree buddy.. FFLP are pretty much my go to tips for trim / woodwork.. in this video ruclips.net/video/wZ8cPWMD9N8/видео.html ..I do a comparison between an FFLP 208 and the TriTech Uktra 208 👍 The atomisation around 800 / 900 psi using the FFLP is just a joy to spray with.. total control 😆
4:38 really smart tip!
Hey Brian.. appreciate your feedback my friend.. hope you’re keeping well.. regards Pete
Why not just spray the ceiling first but when doing walls cut in with brush, then spray walls using a shield back backroll the walls with a large roller and cut in with brush and roller to match it. Saves loads of times on prep no?
Que buen trabajo bro
hermano mio, agradezco las amables palabras de apoyo 💯
Hi Pete great video mate. When your cross hatch the ceiling how long do you wait before you go the opposite way? Paint drying etc? Cheers 👍🏻
Hey Dan, thank you buddy.. you could go straight away (I know it’s common to do that).. I just have a break / a cuppa 😊 ..Then go again ..You don’t necessarily have to cross-hatch either, just like using a roller, if you’re confident in overlapping your passes, all will finish up great 😆 ..Hope that makes sense my friend.. all the best ..Pete
Hi Pete, recently found your excellent channel and subscribed. One question if I may. I bought the Hea pro tip 515 and Wagner trade 3 guard. I put the tip in the guard I was expecting it to lock in the spray position and unblock position. Im guessing different tip manufacturers do them differently. I tried it at 1000psi with water and all worked fine.
Initially I thought have they sent me the wrong tip ie have they sent me the control pro tip. Which I saw you warned about on another post. I guess it’s me just used to using the Greco FFtips.
Cheers Pete.
Hi Pete, Another great video, thank you for posting it - I have a couple of questions:
Is that a 3/16ths hose you are using? It looks a lot more flexible than the 15m ¼” Wagner (Control Pro 350M) hose I’m stuck with (which is a real pain!).
Is the Q1 1” tape your go-to when using the hand masker? I had a lot of trouble recently with masking film where the tape rode off the top of the film. I had to keep starting again and overlapping/vertical-sealing the joints.
Finally, when masking the edge of carpets, against trim, do you lift the masking immediately after spraying? I’m thinking specifically about stair carpets that go full width.
Many thanks for all your posts, I’m slowly getting the hang of it and just looking for ways to reduce prep time!
With best wishes, Rob
Hello Rob my friend.. yeah it’s a 3/16” 7.5 metre hose, much more manageable.. but still drives me mad when it gets twisted up 🙈 ..Regarding the tapes, yeah I’ll use Q1 1” multi purpose as a cost effective solution on the hand masker.. the only time I switch to Deltec Gold 1”, is in conjunction with 12” brown paper and I’m making the finished line on trim / skirting / architrave etc.. in this example, you can run the guard along the wall and get the perfect / even gap all round.. just check you’ve got the blade on the 1” / 25mm ‘setting’.. you may need to unclip the blade and reseat.. if it’s on the wrong setting, not matching the tape, you get what you describe.. tape running off your plastic or paper 🙈 Tapes on carpet, I generally use the 2” / 50mm SP80 green (Q1 general purpose is good also, both cost similar).. then I wait for the sprayed stair stringers to dry down a bit, sometimes even totally dry.. just don’t want to snag the fresh wet paint work.. If totally dry check the dry paint hasn’t bridged 👍 ..hope that covers everything buddy, all the best.. Pete
@@PaintHQ Hi Pete, so you trust Deltec Gold on newly painted trim? I was using purple (delicate) and then tape + paper over the top of it - you might have just saved me 50% time on this alone!
I’ve changed the blade length, up and down, many times until I couldn’t see that the relationship mattered so left the blade on 36mm and was using 24mm tape when the problem arose - I’ll be sure to change it in future.
Many thanks for these and all the other “nuggets”. Best wishes, Rob
You’re very welcome Rob.. yeah to confirm, if I spray trim, the next day I’m very confident to mask with Deltec Gold on the hand masker with 12” paper.. use the blade edge (with the blade set on 24mm) as your guide.. yeah it’ll be quicker my friend.. I only use Deltec Purple to mask the ceiling line.. or to mask old paintwork that I haven’t painted.. eg if I’m doing a lounge, masking the door frame to the hallway 👍 Keep in touch buddy.. regards Pete
@@PaintHQ Many thanks Pete, this is going to help me a lot and, of course, now using the blade guard as a guide makes perfect sense. Best wishes, Rob
Very good video. I have a titan 440 impact. What tip is the best for inside walls with the lowest possible offspray? Thank you!
Ah you have a great machine in the 440i my friend.. I rate and often recommend the HEA 515 ..Wagner HEA ProTip / Titan TR1 HEA 515 spray tip ..With Wagner owning Titan, both these tips are the same 👍 great to have your contribution on the channel, keep in touch.. regards Pete
@@PaintHQ Thank you Pete I appreciate it, keep up the good work.
hey mate i brought 350r 3 weeks ago come with standard gun tips ect i have been useding for last 3 days i cant get on with the gun its the handle im looking at wagner vector pro do you know if the gun fit the tips come with my machine?
Hey Gareth, great news on your success spraying 👏👏👏 ..Unfortunately I don’t believe any of the ‘pro’ guns / fittings will fit the ControlPro range of sprayers.. check out this video, I demonstrate the incompatibility using the 250M
ruclips.net/video/3Mlzp37Uepg/видео.html
..By all means, double check with your sales vendor 👍 ..keep in touch how you get on my friend.. I’m happy to help and advise any way I can.. regards Pete
One question, that graco painting machine, what is it and if it works well with oil paint or which machine would you recommend me to paint with oil?
Hi Yaniel, thank you for your question 👍 ..It’s a Graco 395 Airless Paint Sprayer, with a hopper kit.. oil / solvent based materials will go through airless, like any sprayer you just need the appropriate cleaner to flush the unit after.. I wonder if a air spray / HVLP system would be more suitable if you’re solely looking at spraying fine finishes with oil based.. like I say, airless will spray it and the finish is very very good with fine finish spray tips.. advantage of airless is you could also spray emulsions.. walls / ceilings 👍
This playlist shows the use and setup of an air spray system.. with a pressure pot.. you can also use gravity and siphon guns 👍
ruclips.net/p/PLsoto1xN8d08JHi4iCK6c1CoshB6aC7XF
A nice little airless machine by Graco, if you’re more looking at trim / woodwork paints with the odd ceiling etc.. is the GXFF (maybe called GX19 depending where you’re located).. there’s sone excellent water based trim paints, rather than oil.. if that’s a possibility also.. hope this helps my friend.. keep in touch.. regards Pete 🎨💯
water and paint mixture?.....can you give an example per liter each water and paint
thanx....sory for my broken english
I’m happy to help any way I can, don’t worry about any broken English.. you’ve done very well my friend.. with airless spraying, I don’t typically look to thin the paint.. although a very small amount does help ease the ‘flow’.. so I’d say in this example, about 4 litres is in the hopper and I’d add about an ‘egg cup’ full.. just a splash of water 👍 give it a good stir and you should notice the consistency (viscosity) is a bit easier / free flowing.. just helps lowering the pressure by about 100 psi.. it makes a big difference.. more control, and less bounce back 👍 ..keep in touch, happy to help anytime 👍 ..regards Pete
Great content bro,I have the same setup as you but when I'm finished two coats I have flashing any advice
Hi Naur, really appreciate you checking out the channel and giving your feedback.. no problem, you’ll soon home in on the finer details.. I spray a lot of durables but in a matt, so there’s just the slightest sheen Vs flat matt.. anything with too much sheen are more problematic.. Then just double check your setup.. lowest possible pressure to atomise the material and a nice fan with soft edges.. then technique, approx 12” / 30cm from wall, keeping the gun position square to the wall (not pointing up or pointing down).. keep your overlaps 50% to maintain a wet edge.. that should do it brother 😆.. hope this helps, and feel free to keep in touch asking any questions.. regards Pete 🎨💯
@@PaintHQ thanks for the advice 🙏 I'm a painter back in Jamaica on cars no problem but with emulsion paint it's a different thing,I find out with backroll on second coat fix the flashing or when I used johnson full matt there's no problem
Ah that’s cool brother.. I have a friend from Montserrat, who came to the UK due to the volcanic activity on the island.. he goes back as often as he can.. he speaks so lovingly of Montserrat and the Caribbean 👏 ..Spraying cars is a skill and possibly more technical.. sounds like airless spraying, you’ve learnt so much already.. trust me you’ll get their my friend, you’re doing great.. and I’m happy to give any advice, tips and tricks I can 💯 ..Regards Pete
@@PaintHQ appreciate it bro
💚
🖤💙
Hi Pete, what was the substrate, Ive had to be careful with Durable crazing? Cheers
Hi Lisa, this was on previously painted walls.. crazing can occur if the coat is applied (sprayed) too thick / too quick between coats / or dried out too quick ..It’s not a nice scenario 🙈 Hope this helps a little, keep in touch.. regards Pete 🎨💯
@@PaintHQ Ive had it recent when it went on top of matt, i'm thinking it has dried out too quick. Cheers for another reply and another great video, I'm learning a lot from these.
You’re very welcome, appreciate you watching the videos 👏👌👍😆
Hi Pete.
Have you Not tried the flat tip when using your airless
Hey Les, great to hear from you buddy, hope you’re keeping well.. I’ve still got the info you sent me, I am intrigued 🤔
@@PaintHQ just do it Pete you'll be glad you did🤷♂️
Thank you Les 🙏
Ciao Pete ho un ugello 210 la linea viola da smalto per la mia Wagner PP 90 Extra, mi consigli un 208 ho secondo te va bene questo?
ciao amico mio.. un .010 (come un 210 o 310), è un ugello molto tipico per spruzzare la maggior parte delle finiture / falegnameria / pitture decorative.. per decorativo intendo una vernice che può essere applicata anche con un pennello / rullo .. quindi sì il mio amico un 210 dovrebbe essere molto utile.. quando uso un 208 o 308 sto spruzzando vernice "solo spray" a bassa viscosità / molto sottile / scorrevole.. se sei smalto è "solo spray" quindi userei un 208 / o 308.. o un'altra opzione, usa il 210.. ma muoviti molto più velocemente.. altrimenti potresti ottenere corse (flusso più fluido con un 210 Vs un 208.. spero che questo abbia senso fratello mio ..rimani in contatto, ti risponderò sempre.. saluti Pete
@@PaintHQ
all'ora acquisterò anche un ugello da 208 o 308 per applicare lo smalto. Grazie ancora per il consiglio... saluti Amico
Hi Pete
Do you ever get spits with this?
Hey Graham, hope you’re keeping well my friend.. no I don’t get any spits using this setup (Wagner TradeTip 3 Tip Holder and Wagner HEA ProTip).. with the gun alone.. if I uses an extension, like in this video below.. I’d use a CleanShot valve..
ruclips.net/video/vw_e0a6BGuA/видео.html
If you’re getting spits with just the gun, the tip guard seat / seal could need replacing.. or the gun needle / seat (packings) could need investigating.. hope this helps Graham.. always great to hear from you.. regards Pete
Hi Pete, I find the difference in favor of the HEA tips over the LP tips very marked, you convinced me to try it.
Be fine.
Ah nice, try a 515 first with emulsion.. I find you’ll be able to dial the pressure down around 500 - 800 psi less than LP tips.. the atomisation is a little courser, don’t be concerned by that, it’s still a nice feathered patten, and less overspray 👍😆
let me know how you get on Enrique..
@@PaintHQ Good morning Pete, thanks for the advice, at the first opportunity I will do it and I will gladly tell you when I have done it.
Best regards.
Well, that didn't have much to my knowledge.
Thanks for the feedback.. feel free to check out my latest videos, I do try to share knowledge, inspire and help as many people as possible 💙 all the best my friend.. regards Pete
what gun are you useing
Hey Gareth, thank you for your question my friend.. it’s the Graco Contractor PC Compact 👍 ..all guns pretty much have a standard 7/8” thread so tip guards can be interchanged for different brand tips.. in this case a Wagner HEA 515 😆 ..all the best.. regards Pete