How to Replace Brake Rotors and Pads 2007-12 Nissan Sentra
HTML-код
- Опубликовано: 3 авг 2024
- Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1APBS00851
Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2007-2012 Nissan Sentra.
• Check here for more videos on the 2007-2012 Nissan Sentra • Nissan Sentra 2007-2012
This process should be similar on the following vehicles:
2007 Nissan Sentra
2008 Nissan Sentra
2009 Nissan Sentra
2010 Nissan Sentra
2011 Nissan Sentra
2012 Nissan Sentra
Tools you will need:
• Pocket Screwdriver
• Pry Bar 1aau.to/oa/1AXAA00020
• 19mm Socket 1aau.to/oa/1AXAA00043
• 21mm Socket 1aau.to/oa/1AXAA00043
• 3/8 Inch Air Impact Gun
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Driver
• Swivel
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Paper Towels 1aau.to/oa/1AXSS00035
• sanding disc
• Floor Jack 1aau.to/oa/1AXAA00068
• Hammer 1aau.to/oa/1AXAA00091
• Jack Stands 1aau.to/oa/1AXAA00065
• Wire Brush 1aau.to/oa/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Nissan Sentra 2007-2012: • Nissan Sentra 2007-2012
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
![NoCap - Maliboo [Official Music Video]](http://i.ytimg.com/vi/FUV7E0QyniU/mqdefault.jpg)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Very helpful video, went deep with the details and everything.
10/10 informative and helpful.
Great video! Covers the basics very well. Very straight forward! Thanks for Sharing!
Very informative and detailed instructions, Thank you!
It looks like only one caliper slider pin had/has rubber on the pin, while the other was just metal with no rubber on the pin?
Nice video Thankyou
Great video thanks for putting a video to the instructions
Excellent vid
So you don’t have to open the brake fluid reservoir ?
very helpful video .where I can get the wire screw driver to clean the calaper hole.
What size sockets for 1997 nissan sentra?
@ 10:56 and 13:07 Can just Blue Thread Locker be applied, since it will be very hard to apply heat in that area? Or if it is very small amount, then it is O'K to remove the bolts w/Red Thread locker without heat? Thank you for the great film. We have 2009 Nissan Sentra.
+@olenaerhardt7725 You can blue thread locker, however, keep in mind that blue is designed to easily be replaceable with common tools, whereas red is a more permanent fix.
Do you need the lubricant
Thats why mechanic they say take me 5 days replace god damn brakes, and after they say ohh sorry lm not done yet