2007 2012 Nissan Sentra Brake Pads Rotors Replace How to 2008 2009 2010 2011 Install Remove

Here I show how to remove and install the brake pads and rotors in you're 2007 through 2012 Nissan Sentra. This is the front brake pads and rotors, the way you will know if you need new brake pads and or rotors is a high-pitched squealing noise or a metal on metal grinding sound.
the pads and rotors still need for today...
amzn.to/3amvv3i
the pads only...
amzn.to/3alrOLd
Other stuff I commonly use in these videos…
Milwaukee Ratchet: amzn.to/2Fzf839
Regular Ratchet: amzn.to/2FxYsZO
Milwukee Impact: amzn.to/2X5c5W2
Socket Set: amzn.to/2IOTERA
Socket Extension: amzn.to/2XxCIaI
Swivel: amzn.to/3dYJieE
Floor Jack: amzn.to/2LmGM7d
Jack Stands: amzn.to/2XwcDbX
Wheel Chock: amzn.to/2J6Sjog
Brake Cleaner: amzn.to/37tFsd7
Permatex Rtv/Silicone: amzn.to/2Qv6aJK
The tool I use to turn on parts like headlights, starters, fans, and more: amzn.to/2Oz8YUy
Follow me on Instagram 😁😁
/ jordanfixbook

[@Peace22_]

Hey my man, the reason that bolt had so much resistance at 3:35 is because you had the whole bracket's weight pushing down on it. If you just hold up that bracket it'll come right out with your ratchet :)

[@ianmcgrath3112]

😮t😢 7:11 😅😢😮😮😮6u
😅😮t😢😅😢lo 5 7:115.00 😊🎉😊 l🎉hi I

[@djhodges6892]

You should've took off your brake fluid cap off. So you push the air out of the lines. And you forgot bleed your brake lines.

[@MrPopoffsun]

Good job dude, thanks!

[@blakeglover5183]

Why did you use the extra time to put it back together

[@ericneiman5556]

I always put the wheel under the car so if it does go down it won't cause much damage. Still nothing has happened like that to me

[@swaggkidd2fresh]

Good video bro helped me out a lot!
PS- I laugh at my own jokes too lol

[@danielebbeling4056]

Do you need to loosen the cap on the brake reservoir under the hood , while compressing the brake caliper piston in?

[@marie3321]

and thank you for the list of materials and equip! very helpful video!

[@AndrewGrey22]

Oh good, it's the grey one, same as me. lol

[@huntergolliday6004]

How tight did you go on the caliper mounting bracket bolts?

[@GHEC3]

He doesn’t know because nobody uses torque wrenches , unbelievable

[@bizichyld]

I thought he said 80 ftlb

[@luisreyes963]

Good video 👌

[@edwardhosmer5726]

No brake grease?

[@djhodges6892]

You don't really need it if there is still some. I use high temp grease in the push pin holes never had a problem.

[@charleyu5506]

This looks a lot easier than I thought but I don't have the tools

[@youngclay6433]

You ONLY care if the car fall and hurt you.... but you DON'T CARE if the jack fail and damage the customer or friend car???

[@sluggerbaloney9737]

Yeah, it's hilarious how these "DIY Auto Fixit" videos are always so bogus, all their nuts and bolts just spin easily and come off by hand ... what you don't see behind the scenes are the specialty mechanics tools like pneumatic impact wrenches and breaker bars used to get them off first, then they thread them back on by hand to make it look easy
The 2 bolts holding my caliper bracket on literally broke my electric impact hammer when I tried to get them off. So yeah, this "easy" job takes about $300-$400 in specialty tools to do. Very deceptive video.

[@benm5651]

Mine is invisible lol