Hi, I accidentally pulled the clock spring cover out while getting my steering wheel out. Then I had to go home so I put the wheel back on and started driving with the ribbon out. the code b2414 (steering position sensor ) showed on my display. I got home put another clock spring with its attached angle sensor on but I am still getting that code. Any suggestion? It's the same clock spring as in your video. Thanks!
Hello. My 2010 rxh steering wheel one side turns more than the other. And as i drive it try to pull me on the rigth. Dont have any code. Could that affect the pulling to the rigth. Wheel alignment done and correct, tires are new
You don't have any air bag related codes? Normally when the clock spring fails, it can trigger an airbag code. Does the horn operate? a damaged clock spring also keeps the horn from operating
Hi, i have an 2011 is250 and the steering wheel doesn t have paddle shifters. I want to convert the wheel with one with paddle shifters. What should I do beside buying the 2011 wheel with paddle shifters? I think I should change the spring behind the wheel?
@RodriguezRepairs hey yes . I open again and do exactly as you did and finally I found the center position. Everything thing works fine now . Steering button. Traction controls and blind spot detection. Thanks
Hello Leo I have a Lexus is250 2006 my problem is the steering wheel is really hard y have the p/s light on it can be the steering wheel angle sensor too!? Thanks!
Don’t know if you have solved it… but that is an issue with the electric steering rack… but if it’s hard only when the gear is on neutral and park, then that’s the hub in one of the tires in front… that’s how I solved mine
My sun roof was leaking and dripped down the A pillar into the fuse box and blew a few fuses… i also got the p/s light and the steering became really heavy and stiff… just changed those fuses and its back to normal again
Hello brother, I suffer from difficulty in performance and a decrease in smoothness. When I move the steering wheel quickly to the right or left, it becomes smooth and natural, but with any big turn, it becomes hard. When I drive at a speed of 40, there is a grip in the tires and a sound is made with the appearance of the anti-slip sign. Can you help me, my dear brother? Does the slip sensor have a cause for the problem?
What codes do you have stored in the system? Do a full scan of the modules to see if there is a code related to your concern. These vehicles are equipped with EPS (Electronic Power Steering) but before the steering motor can be rooted as the cause, I would scan the vehicle first.
@@RodriguezRepairs UNREC Engine revolution inter record deg 137.302 TRQ2 zero point value F2 UNREC Steering angle invalid record Nm -0.10 Steering wheel torque UNREC Speed signal invalid record deg 270.116 Motor rotation angle ON PS Assist signa A -0.01 Command value current 0 The number of DTC V 13,230 PIG2 voltage V 27.048 Motor voltage V 13,671 Motor terminal volt(U F5 V 13.622 Motor terminal volt(V V 13.622 Motor terminal volt(W Times 0 IG On/Off times REC Motor Overheat record UNREC Motor Lo power
Great Video , I liked how you explained the center position at the end , you can also do it with a scaner that has live data for EMPS.
Great video
Great explanation and camera positioning
Great job
Much appreciated! Thanks for watching!
Hi, I accidentally pulled the clock spring cover out while getting my steering wheel out. Then I had to go home so I put the wheel back on and started driving with the ribbon out. the code b2414 (steering position sensor ) showed on my display. I got home put another clock spring with its attached angle sensor on but I am still getting that code. Any suggestion? It's the same clock spring as in your video. Thanks!
Hello! Do you happen to have a pen part number ? My clock spring went bad and the one I ordered doesn’t have the angle sensor assembly
Thanks! Great directions and worked perfectly. Awesome video!
Im glad you found it helpful! :)
Hello. My 2010 rxh steering wheel one side turns more than the other. And as i drive it try to pull me on the rigth. Dont have any code. Could that affect the pulling to the rigth. Wheel alignment done and correct, tires are new
You don't have any air bag related codes? Normally when the clock spring fails, it can trigger an airbag code. Does the horn operate? a damaged clock spring also keeps the horn from operating
is centering the same as working on a 2019 is300
Hi, i have an 2011 is250 and the steering wheel doesn t have paddle shifters. I want to convert the wheel with one with paddle shifters. What should I do beside buying the 2011 wheel with paddle shifters? I think I should change the spring behind the wheel?
Great video man thank you
no problem!! 🙂
Great video . I think i didnt put mine in correct position coz after installing it . I got blind spot malfunction on dashboard
Glad it helped! Where you able to fix your problem?
@RodriguezRepairs hey yes . I open again and do exactly as you did and finally I found the center position. Everything thing works fine now . Steering button. Traction controls and blind spot detection. Thanks
Great video . I think i did put mine in correct position coz after installing it . I got blind spot malfunction on dashboard
Thank you! Were you able to correct your issue?
Hello Leo I have a Lexus is250 2006 my problem is the steering wheel is really hard y have the p/s light on it can be the steering wheel angle sensor too!? Thanks!
Don’t know if you have solved it… but that is an issue with the electric steering rack… but if it’s hard only when the gear is on neutral and park, then that’s the hub in one of the tires in front… that’s how I solved mine
My sun roof was leaking and dripped down the A pillar into the fuse box and blew a few fuses… i also got the p/s light and the steering became really heavy and stiff… just changed those fuses and its back to normal again
Hello brother, I suffer from difficulty in performance and a decrease in smoothness. When I move the steering wheel quickly to the right or left, it becomes smooth and natural, but with any big turn, it becomes hard. When I drive at a speed of 40, there is a grip in the tires and a sound is made with the appearance of the anti-slip sign. Can you help me, my dear brother? Does the slip sensor have a cause for the problem?
What codes do you have stored in the system? Do a full scan of the modules to see if there is a code related to your concern. These vehicles are equipped with EPS (Electronic Power Steering) but before the steering motor can be rooted as the cause, I would scan the vehicle first.
@RodriguezRepairs I did a check and it says the steering angle is invalid. What is the answer? 😢
@RodriguezRepairs The test says the steering angle is not working properly. What is the solution, my dear brother? 😢
@@RodriguezRepairs UNREC
Engine revolution inter record
deg
137.302
TRQ2 zero point value
F2
UNREC
Steering angle invalid record
Nm
-0.10
Steering wheel torque
UNREC
Speed signal invalid record
deg
270.116
Motor rotation angle
ON
PS Assist signa
A
-0.01
Command value current
0
The number of DTC
V
13,230
PIG2 voltage
V 27.048
Motor voltage
V
13,671
Motor terminal volt(U
F5
V
13.622
Motor terminal volt(V
V 13.622
Motor terminal volt(W
Times 0
IG On/Off times
REC
Motor Overheat record
UNREC
Motor Lo power
@RodriguezRepairs
Plzzzz help me 😢😢😢😢
great video man
thank you! Im glad this video helped you out!
where exactly can i find that Clock Spring
Amazon
My gs350 clock spring g broke. Mechanic broke while installing starter.
I highly doubt that
Those are two completely different systems. I highly doubt that as well
Hello from Mooresville NC
great video how you explaint thank you
Glad it was helpful!