How To Carbon Fiber Wrap Lexus IS Interior | Detailed Guide | Vvivid Vinyl
HTML-код
- Опубликовано: 28 мар 2021
- I wrapped the interior pieces of my Lexus IS350 with VViViD High Gloss Black Carbon Fiber. Hopefully I gave you some motivation to try this out with a few tips to make the job easier. I listed all the tools and products needed in the description.
Comment down below and let me know if you decided to try it out.
Product List:
Vvivid Vinyl Carbon Fiber : amzn.to/3qywe5A
Wagner Heat Gun: amzn.to/3enDVJs
Screw Driver: amzn.to/31VqFUV
Scissors: amzn.to/3kYnN2y
Pry Tool: amzn.to/3btXL46
ScotchBlue Tape: amzn.to/3t4AdZn
X-acto Knife: amzn.to/3btNKUv
Mat: amzn.to/3eoqwRn
Microfiber Towel: amzn.to/3l4Vv6n
Isopropyl Alcohol: amzn.to/3cg2zt5
Camera Gear:
Camera: amzn.to/3fEKF6y
Gimbal: amzn.to/2R8Tjjw
Lighting: amzn.to/3l2FeiA
Tripod: amzn.to/3bwoooT
Mic : amzn.to/2OfhFXy
Lens: amzn.to/3t5A08l
Instagram: @blvcklex
TikTok: @blvcklex
#IS350 #CarbonFiber #Vvivid #Vinyl 
Авто/Мото
BRUH! This is such a quality tutorial!! I am currently wrapping my is250 and I am very thankful. Good job and keep it up!!
Thanks for watching, I really appreciate it!
@@brightfayemi hey bro the link expired for the wrap what specific wrap did you order since I want the same one
@@Geezy100 VVIVID High Gloss Black Carbon Fiber 3-Layer 3D Realistic Carbon Fiber Look Cast Vinyl Wrap (2ft x 5ft) www.amazon.com/dp/B00MJ7U0FC/ref=cm_sw_r_cp_api_glt_fabc_R8ZZWJFC3QX22114EEBC
@@brightfayemi damn bro I order the Epoxy high gloss one hopefully that looks better or the same as this one
You aint lying hes Saved me a lot of stress because I need to run some wires to hook up an equalizer in my car so I just use this video just to see how to take out the console..
Finally! The cup holder was the only piece I didn't know how to take apart. I ended up wrapping it with the lid on. Need to redo it now. Thanks for this vid!
i second that hahaha
I third that
Used this video to Wrap my Mazda 3 hatchback. Thank you for the tips, the wrap you recommend is really easy to work with. Super satisfying way to improve your daily driver!
This is some sick professional work bro. Here I was thinking of replacing the whole panels 🤷♂️. Thanks for sharing. Please create more videos
goated tutorial fr gonna help so much. i got the same vinyl bc it looked easy to work with like the bubbles just went away with some heat. can’t wait to try this
Thank you for taking the time to post this. Very helpful. Super excited to wrap my 2011 Lexus 😊
You are a natural born teacher
Quality video
This tutorial is so good and useful. 👍🏾Gonna show this to my upholstery guy in Nigeria!
Thank -you for this. The air bubbles always gave me issues. Appreciatee the time you put into this..👍🏻
Best video on the subject in my opinion....
Really helpful and professional vid. Just ordered the vinyl boutta do this to my 350👍🏼
Appreciate it! Let me know how it goes
Wow this gave me confidence in doing the outside of my car
Unreal bro. This was awesome. Thank you for making this. 🤙🏻
Glad you liked it! I appreciate you for watching!
Nicely done, great job! 🔥
Pretty sweet! With the help of this vid, the custom pre-cut trim package isn't necessary. This will help save folk$
Hope to find more is250 tips n tweaks on ur channel!
You the goat for this video fam
Beautiful tutorial man thank you!
Amazing work bro, thanks for video✌️
Entertaining and educational! I'm sold, I'm subbed!
Very professional content !
Cool video can’t wait for more!
Great tutorial my man
Yo bro this video is so good I had to comment on it. Keep it up you have potential!
Appreciate that! Means alot
WELL made tutorial!! Gonna make my interior somewhat IS-F looking soon (no fake badges no worries)
such a good video, thank you
Amazing!!!! I’m Planning to buy is250!!!
Im waiting for more vids bro
same bro
Best video, about to try it, just bought a is also
That’s a nice touch 👍👍
Hey, cool and nicely done!
Great video! Been wanting to cover mines up like so. Going to get all the supplies and try it myself
Clean install bro,you really took your time for this.i own the same car and im thinking about doin this also,but in grey gloss wrap
Appreciate it! That would look clean, let me know how it goes!
@@brightfayemi i sure will!👊🏽
How did you actually removed the chrome piece(from the shifter)and how did you put it back again?glued or just put it back in..?
@@rabinboedhoe3533
I just used the plastic removal tool and popped it out slowly on each corner.
Personally I just put it back on and screwed it down with the other piece that goes on top to hold it in place...once it’s screws down it holds. But you can glue it if you want to get that added stability.
Aye I got the es version of the same year it seems so this is perfect! Good video:)
Nice job...I'm going to try that on my car..
good job for real .. keep it up👌
I appreciate it!
Sick vid brother
Appreciate it!
Such a beautiful job!!!! 👍🏽👍🏽👍🏽👍🏽👍🏽👌🏾
Appreciate that!
AmaZing tutorial
I did mine 2 yrs ago and for the life of me could not figure out how the pop-up cup holder came off. Mine looked (still looks) like garbage and because of this video I'm going to re-do my entire interior. I went with the matte finish wrap the first time but I know VViViD is really easy to work with so I'm going to try it with that. Well done!! 👌🏾
Appreciate that! That piece seems like it doesn't come off, but you just have to us some pressure since they have never really been taken off. Other than that its pretty straight forward. Let me know how it turns out once you redo it all!
I’m planning on doing this in my 2is250. How much wrap did you buy? Is 4ftx5ft enough?
@@brightfayemi I’m planning on doing this in my 2is250. How much wrap did you buy? Is 4ftx5ft enough for the trim pieces? Including the back of the car as well
@@wholelotta5387 For sure, more than enough
@@brightfayemi if it’s more than enough then I mind as well get less😂. How much should I buy? Is 1ftx5ft good?
Great detailed video with excellent tips. Definitely gave me the motivation to tackle this myself. Just have to get a heat gun now. I don't even have a Lexus. Have a Toyota but interior is similar. Thanks for the video
Flawless
Music is as chic and classy as your car is now after the wrapping. Great video.
great video thanks men
Nice job
Looking good brother you just need the F sport gear knob...overall great editing and easy to follow steps
Deff wanna do this on My 220 d
I’m currently doing a forged carbon fiber wrap and I’ve been watching this video exclusively for wrapping my is250
Nice! I was actually going to do the forged carbon look as well but I just decide to go with this. Let me know how it turns out I'm curios to see how it will look!
@@brightfayemi here I’ll send a video to your Lexus instagram
Nice vid man! Do you have the link for the shift knob, looks clean dude!
Amazing video! Quick question tho. How did u take off the cupholder plastic trim soo easily? I am struggling to take it off as i am afraif i might break something. Also. Where excatly would i pry to to off thay piece?
Thanks for this video. Do you know if one can wrap the lexus dashboard too?
Nice job!
Will the carbon wrap work on the door panels?
Great vid. I really appreciate your attention to details that matter. Thanks again......great vid....
BTW .....is that the VViViD XPO Black Carbon Fiber 5ft x 1ft 8yr Car Wrap Vinyl Roll with Air Release or the high gloss version of the same???
Appreciate it! It is actually the High Gloss version not the XPO. The XPO might be better if you try it out let me know how that one is.
YOU DEFINITELY MAKE IT LOOK NICE & EASY…. Mine came out looking like some guy pissing his wife off on his day off wrapped for the first time did it…. But like I said before YOUR VIDEO IS DEFINITELY 100% the best one I’ve seen & recommend it to everyone.!
I try my best man, much appreciated!
Great video brother, thanks for the help. Where did you get that shifter? Been looking for one like that with no luck.
Appreciate it!
You can find it on Amazon. Here is the link amzn.to/2QhF1MW
Can you post a link for that shift knob? Dope video bro!
Good video, upload more.
Sub install?
Vgrom v2 install?
Bumper removal?
Vgrom V2 Installed…video coming soon
Where'd you get the ball shift knob? Looks so good
AWESOME
Do a video of how to change the language of the stereo head unit
gooood work bro, I'm about to do that myself, do you recommend that vinyl, do you think it's the best for that job?
Appreciate that! Yeah I do recommend it, it’s really easy to work with and it gives off a realistic look.
Does vinyl stick to the textured hard plastic parts of the interior? Trying to dye my interior black and wrap the plastics black as well. Or maybe stain or paint them black… unsure right now.
I have a 2006 IS250, my doorpanels are different in that they’re one piece. The slopes for the window buttons are cast together with the cover, unlike yours which have the slopes as seperate pieces
I can’t figure out how to do them
i might do this to my is250.Any left over i might as well do my tv and stereo remotes.
Question. I park my car outside. I don’t think I can finish all the trim pieces in one sitting. Can I still lock the car with the pieces unplugged?
Done this to my old ES350 looks so much better than the ugly wood look.
Great video, keep it coming. Any plans for your Lexus ?
I appreciate it, i got more videos on the way, just a lot of unexpected things happened to the car recently that slowed me down but it’s coming.
@@brightfayemi what size vinyl did you go with ?
@@luis5232 I used one roll of the 2FT X 5FT. Still had some left over.
Which is more than enough even if you mess up the first time
Looks beautiful.
How is it holding up so far?
Its holding up great!
How much Wrap did you use for all the panels?
How do I get the cup holder lid off ? Yours came off so easy and you didn’t show much
Can the entire interior be changed to recent models, like 2018?
hey what shifter knob is that, it’s clean ash
where did you get the shift knob
you plan on making more vids? please do 🔥
Bro where do you get those nice metal shift knob handle? Looks nice
You can find it on Amazon. Here is the link amzn.to/2QhF1MW
Dope
I wanna put that shifter ball on my ls400 is there’s a button on it tho
Bro where did you get your shift knob?
Thanks for the help seriously, where the new content at?
can someone tell me that the part is called at 12.09 my one is chipped i’m looking for a replacement
Where is that shift knob from!? Please link my bro.
Which carbon wrap is it ? 4D or 5D ?
what shift knob is that, please droo a link
Houston, Texas, USA
September 18, 2023
8:35 am CST
======
Wow, Looks Really Good.
======
I have a Metalic Dark Blue
2008 is250 w/Tan Interior
======
Any Recommendations on
Best Bang for my Buck
DIY Ceramic Window Tint ?
I want to do
- 80% on my
WindShield (almost clear)
- 35% driver side window
- 20% rear side windows
& rearview Back window
-------
Houston is Blazing Hot
And I need to Blockout
As much IR Heat as
Possible
Link for the shifter knob pls
Great job bro. How much wrap did you end up using in terms of FT?
I used one roll of the 2FT X 5FT. Still had about a little less than half left over.
@@brightfayemi awesome thanks 🙏🏼
What size vinyl did you get ?
How do you get the cupholder cover off of the actual cupholder to wrap? And the silver gear shifter outline
I just used my hands to pry it out from the back, and with the silver gear shifter you can use a flat head screw driver to lift up on it slowly and when putting it back you can use some super glue to hold it back in place, there is a few plastic welds that hold it in place. Or you can just leave it if you think you can wrap around it.
@@brightfayemi sounds good man, thanks!
Would 1.49 x 5 ft be enough?
Spray Windex or soapy water on the part before you put the vinyl on the Bubble smooth squeeze out this is better you won’t need a heat gun to get the bubbles out
Can you tell me what size tyre to get for my is250?? I want to put 19 or 20" stances but dont know what tyre size??? U seem to know what u upto....
I suggest 19inch rims
225 or 235 /35/19 Front
265 or 275 30/35 /19 Rear
Get you the best fitment without rubbing
14:16 what about the manubios?
Where did u get the shift knob? If u have a link plz ☺️
amzn.to/2QhF1MW
Question: roughly what dimensions & length of wrap does one need to cover everything in your video? (I ask because the link don’t work no more & I’m just need to know how much wrap I’ll need….)
I used one roll of the 2FT X 5FT. Still had some left over.
Which is more than enough even if you mess up the first time.
Good looking out young man 🤙
What size wrap should I get to do this ? 1.5ft x 5ft or 2ft x 5ft ?
I used one roll of the 2FT X 5FT. Still had some left over.
Which is more than enough even if you mess up the first time
where did you get that shift knob from?
amzn.to/2QhF1MW
I’m done with wrapping everything besides the cup holder. It’s a pain in the ass.. anyone have any tips on how to get it off?
Did you ever get it off ? I could use help
How do I do my corners of my parts? I legit can’t make them smooth or anything they look like shit
Yoooo where that Lexus content at G?
Wow no thumbs down
How much did you buy and what size? Please reply!:) thank you
I used one roll of the 2FT X 5FT. Still had some left over.
Which is more than enough even if you mess up the first time.
@@brightfayemi bro your amazing for replying so fast thank you man i appreciate it have a wonderful day
@@Indigo_arles For sure! Let me know how it turns out