✅ *After Effects* ➧ prf.hn/l/OVxMyzj ① *Part 1* ➧ goo.gl/3PWECe 📷 *Image* ➧ goo.gl/qcSw5J --- Final note. If you move the adjustment layer above the background the magnify effect will make the background zoom in and out to the beat of the music
I need help my picture got doubled how do i fix it? (So i mean i have followed all your steps but when im playing the video my picture/Circle gets double from the beggining to the end Pls help me
This content holds up in the 2020 version of AE! The only change is adding the variable to the formula after you drag the little squiggly, instead of before. Other than that, it's perfect. Thanks!
i have a problem, cause the spectrum layer is too small the waves cut to the edge of the layer and if i make the layer bigger the whole thing gets bigger. and the bouncing thing just makes the logo bounce WAY TOO MUCH even though i added *0.5
@@xplayz4578 for the first one just move the audio spectrum position at the bottom of the layer or lower max height and the magnify is a bit awkward to control the limit so im going to have to get back to you on that one
@@MrAydinminer no way haha that's actually really funny you mentioned that because i just recorded a video today on how to export videos in after effects aha I'll have the video out soon
Idk why but when im done with all of it the second picture is just doing the bass in the middle like circle just jumping with bass.I think its something with the magnify effect
Lmaoo when I add the audio spectrum effect it's upside down. Like instead of having the peaks mirrored on top it's on the bottom of the circle. Any solution for this?
Im lost, cannot do it because it doesnt look the same for you at 7:20, i give up. Tried to physically type in that command and it didnt work for me, where did you drag it from, i still dont see it the same on my screen.
It's just a times number for the speed of it and how much it will react. It gives it that bit extra. You can use *0.5 for smaller react and *2 for double at the end of the expression
Why is no one asking how to add the mulitply part. It's not an asterisk so what the heck is that symbol you added and how did you add it? I tried the asterisk and it wasn't it so what is that?
I'm just learning to work in this program, can I ask one question? Is it possible to somehow set a limit on the maximum value of blur and brightness? During bass, my video becomes too bright. And also sorry for my English, I'm not good at it.
The easiest way I can think of is to times or divide the expression by a number so for example *2 or /2 at the of the expression. Or if you get more complicated then it's more on the coding side which I personally still have more to learn about it
I literally did 1:1 what you did but except for my video being at 80% scale neither of the two effects have ANY influence onto the video... dunno wtf Im doing wrong but I will try my hardest, thank you anyways!!!
bruh use media encoder fr rendering..u can chose ur particular format like h.264 for rendering ...it will occupy round 2040 mb only! look up for tutorials in youtube!
Ahh right yeh I can't remember if it was a setting you can change or something to do with a mask you may need to explore settings or just lower max height
It's possible yes but you'd need another third party plugin you can even get desktop applications that sync live with music playing just search desktop audio visualizers
Im not sure but I think there was a mistake when you mentioned using the opacity with the slider as it made my logo transparent as it reacted. Should I link it to the scale instead because when I tried it, I got the bounce effect but my logo was too small
please help, when i add the adjustment layer, it's as if it creates a duplicate of the logo and spectrum, and that duplicate is the one moving to the music but the original logo and spectrum behind it is just still the issue is that now i have overlapping loggos and audio spectrum, how do i fix
Eu fiz com uma música aqui, (primeiro projeto) quando fui fazer o (segundo projeto) não consigo fazer o logo, o brilho e o cc radial fast blur reagirem com essa outra música, sabe me dizer como faço para editar esse (primeiro projeto) com outra música?
I have a question, I have 2 logo's that are the same color, same brightness etc. could i use those 2 logo's instead of changing the brightness or anything?
Magnify isn't working for me, I'm connecting the Magnify amount to the Audio amplitude with that little string as you showed, but nothing is happening. do you know how to fix this?
It's background the same as the logo but you just put the adjustment layer above your background Make an adjustment layer above your background. Add "magnify" effect on to adjustment. Set the magnify on 100% and scale on 1500 then hold alt and click the stop watch near the magnify percentage and type 100+then drag your pick whip to your amplify layer.
Thankfully this worked out perfect for me! Thank you for that. The only thing is that now that I got a basic template of this created with my preferences, I want to be able to simply change out the original music to the video audio (Since I'll be using different videos with the same template for gaming). @ 3:05 I noticed you click on the song but that doesn't show for the video I want to sync it to. The video is imported but not shown as an option to sync to. What would you suggest to fix that? @VericDesigns thank you for your time!
Do you know how I can translate this "wiggle(effect("Wiggle - rotation")("Wiggle Speed (wigs/sec)"), effect("Wiggle - rotation")("Wiggle Amount (degrees)"))" into german? It says wrong because its english.
It all depends on how much, the better the more expensive but most modern computers are fine and best editor would be Premiere Pro or Sony Vegas which is easier to learn
✅ *After Effects* ➧ prf.hn/l/OVxMyzj
① *Part 1* ➧ goo.gl/3PWECe
📷 *Image* ➧ goo.gl/qcSw5J
---
Final note. If you move the adjustment layer above the background
the magnify effect will make the background zoom in and out to the beat of the music
link logo
VerticDesigns hey bro can u help me how to exit for the 4 square
*"After Effects error: Cached Preview needs 2 or more frames to playback." What is this :(*
I need help my picture got doubled how do i fix it? (So i mean i have followed all your steps but when im playing the video my picture/Circle gets double from the beggining to the end Pls help me
VerticDesigns urghh you should said that in the video. 😭 It took me 12 hours to render mine and I got a bouncing background as a result!
Man just gotta say thanks for making this video! You don't even know how many times I've gone back and referred to it.
thank you very much. Any time i don't found how to make bass zoom, but i find it in your channel. Thank you
This content holds up in the 2020 version of AE! The only change is adding the variable to the formula after you drag the little squiggly, instead of before. Other than that, it's perfect.
Thanks!
Huh, for me I've not noticed much of a difference
Everyone: Here to learn how to create audio spectrum
Me : Vibing to the example song
Haha that makes me think of the video of that white cat head bobbing meme lmao
Thanks bro!!! Finally got it right after many coming from many other channels
The search is over haha hope you finished your project
Thank you sooo much! this helped massively, hope you have an as good evening as i am:)
100+thisComp.layer("Audio Amplitude").effect("Both Channels")("Slider")0.5
i have a problem, cause the spectrum layer is too small the waves cut to the edge of the layer and if i make the layer bigger the whole thing gets bigger.
and the bouncing thing just makes the logo bounce WAY TOO MUCH even though i added *0.5
the magnification is overreacting way too much to small things such as hithats
@@xplayz4578 for the first one just move the audio spectrum position at the bottom of the layer or lower max height and the magnify is a bit awkward to control the limit so im going to have to get back to you on that one
Thanks The best Tutourial
Огромное спасибо! Хоть и видео выпущено 5 лет назад, но вы смогли мне помочь прямо сейчас. Очень понятно всё объяснили и подробно показали 👍
the video is from the 2'nd of march ... YES. But, you will not belive how much this tutorial helped me in creating my own style of music
Thats brilliant and its great that it helped you out, you can carry on creating now :)
@@VerticDesigns Thank you again very much
Thanks dude , the most helpful audio spectrum tuto
You probably wouldn't believe it, this video make my life 2 times easier! Thank You!
That's amazing ahah and no problem
@@VerticDesigns Is There A Tutorial You Made On How To Export Adobe Effect Project As Mp4?
@@MrAydinminer no way haha that's actually really funny you mentioned that because i just recorded a video today on how to export videos in after effects aha I'll have the video out soon
@@VerticDesigns lmao thanks. btw i subscribed.
@@MrAydinminer glad you joined :) and I'll let you know when I'm going to upload it if you want it
Thanks,this is the first good tutorial 👍
Cheers! I appreciate it
EXTREMELY good tutorial!!!
TY
Thanks bro your tutorials are so helpful! i plan to use something like this for my videos soon.
That's great to hear! did the video play smoothly for you? just wondering because I've had problems uploading it
Thank so much for teaching finally i can make it Amazing Video
thanks man appreciated ur tips and tricks helped me man
No problem :D
you helped me so much thank you .i am beginner and it helped me a lot and i learned cool stuff
Most helpful video i've ever seen
Huge thanks! This helped me making crazyness!
Idk why but when im done with all of it the second picture is just doing the bass in the middle like circle just jumping with bass.I think its something with the magnify effect
I found that there are 2 magnify effects in Ae
thanks for share boss
Not a problem and thanks for dropping by
Best. Tutorial. On youtube. Thanks you!
Dude how can I make a audio spectrum like NEFFEX NO TURNİNG BACK album?
Lmaoo when I add the audio spectrum effect it's upside down. Like instead of having the peaks mirrored on top it's on the bottom of the circle. Any solution for this?
Thanks for your help video was amazing.
The best tutorial!
man you're a legend
I did everything right except logo. My logo does not reacts at all, so what's wrong?
Move the adjustment layer above, it applies the effects for layers under it
Thank you for your tutorial.
Nice one Thanking you keep it up
Thanks Bro. Subscribed!
tyvm fam u saved me
Thanks
Im lost, cannot do it because it doesnt look the same for you at 7:20, i give up. Tried to physically type in that command and it didnt work for me, where did you drag it from, i still dont see it the same on my screen.
can u tell me how can i make the logo react only to a certain range of units on the audio (lets say bass which is -1000 and lower)
Use Trapcode Sound Keys plugin
thanks your a god
thanks for the template that was righteous of you
Very nice
Hey man how can I contact you? Your content is dope!
You can find all my links on my channel :) I'm most active on RUclips
thank you soooo mucchhh
ay no problem :D
bludy legendary
Hello I am not clearly about expression time 0.5. Can you write it to me,??thanks
It's just a times number for the speed of it and how much it will react. It gives it that bit extra. You can use *0.5 for smaller react and *2 for double at the end of the expression
@@VerticDesigns Thank you so much...
Thank you
No problem
It is a very easy and usefull tutorial, thx man
thank you men nice tuto
Thank you man a lot
Please help me I can't get the effects tap like you got on the right of start frequency and end frequency tap
THANKS a lot!
wow thanks for tutorial👍
Why is no one asking how to add the mulitply part. It's not an asterisk so what the heck is that symbol you added and how did you add it? I tried the asterisk and it wasn't it so what is that?
i can make the spectrum but i cant bass zoom :D Thx
sorry for being so late, but you get the plugin named "Transform" and put it onto an Adjustment Layer, and then link scale to slider
Thank you bro!!
Np
dude,,, awesome video,, learned a lot,,, but this might be the most difficult thing i might have to learn,,,
Hướng dẫn rất có tâm... cảm ơn bạn nhiều
thank u bro! liked and subed thanks
No problem happy you liked it :D
I'm just learning to work in this program, can I ask one question? Is it possible to somehow set a limit on the maximum value of blur and brightness? During bass, my video becomes too bright. And also sorry for my English, I'm not good at it.
The easiest way I can think of is to times or divide the expression by a number so for example *2 or /2 at the of the expression. Or if you get more complicated then it's more on the coding side which I personally still have more to learn about it
THANKS I MAKE IT
Nice one btw i sub
Awesome! welcome to my channel:)
wonderful
thank u
And how did you add the background the car?
am having a hard time making a circular photo without frames so it will be a perfect circle how can i do that :( ?
You can use a circular mask and hold shift while you're creating it to make sure it's all equally sided
Muchas gracias!
I literally did 1:1 what you did but except for my video being at 80% scale neither of the two effects have ANY influence onto the video... dunno wtf Im doing wrong but I will try my hardest, thank you anyways!!!
Thanx man! )
It's all good thanks for dropping by
make a tutorial how to download sound key for after effects cc 2017 plz
somehow i ended up with a file of 30gb
bruh use media encoder fr rendering..u can chose ur particular format like h.264 for rendering ...it will occupy round 2040 mb only! look up for tutorials in youtube!
big fan bro. i'm big fan
thanks man
cool! thanks :)
Thank you Maaaan
thanks bro
is there a way to fix the issue at 11:19? the audio spectrum gets cut off in a circle shape when the music gets loud.
Ahh right yeh I can't remember if it was a setting you can change or something to do with a mask you may need to explore settings or just lower max height
Is it smoke ball?
That's soo cool ... :)
Can you instead of importing a mp3 make it work with real time music it will be awesome for a party
It's possible yes but you'd need another third party plugin you can even get desktop applications that sync live with music playing just search desktop audio visualizers
thanks my man
Subscibed + Liked!
This video helped me so much!!
Thank you for giving up some time in your life to make this!
I cant get the expression thing to appear. im using the lates version on windows ten. Help! (I have tried alt+click aswell)
Why does my polar cirkel, do not go all around the logo?
Increase the width so that it reaches and touches the start point
Im not sure but I think there was a mistake when you mentioned using the opacity with the slider as it made my logo transparent as it reacted. Should I link it to the scale instead because when I tried it, I got the bounce effect but my logo was too small
Yeh you could but with scale you'll just need to limit the max size because it can go pretty crazy with it haha
Nice.
please help, when i add the adjustment layer, it's as if it creates a duplicate of the logo and spectrum, and that duplicate is the one moving to the music but the original logo and spectrum behind it is just still
the issue is that now i have overlapping loggos and audio spectrum, how do i fix
I'm not quite sure what's causing it, just double check everything or look through the layers
question, do you need a picture to bounce or does it work with just the audio spectrum? like make the spectrum bounce
Yeh you can make it only bounce for the audio spectrum
Eu fiz com uma música aqui, (primeiro projeto) quando fui fazer o (segundo projeto) não consigo fazer o logo, o brilho e o cc radial fast blur reagirem com essa outra música, sabe me dizer como faço para editar esse (primeiro projeto) com outra música?
Thanks So much
No worries 👍
I have a question, I have 2 logo's that are the same color, same brightness etc. could i use those 2 logo's instead of changing the brightness or anything?
nevermind i got it. great tutorial btw! helped me a lot!
Magnify isn't working for me, I'm connecting the Magnify amount to the Audio amplitude with that little string as you showed, but nothing is happening. do you know how to fix this?
Did you edit the amount to a low number then add the expression? It should work its all in the video
How to make background pic zoom with music ?
It's background the same as the logo but you just put the adjustment layer above your background
Make an adjustment layer above your background. Add "magnify" effect on to adjustment. Set the magnify on 100% and scale on 1500 then hold alt and click the stop watch near the magnify percentage and type 100+then drag your pick whip to your amplify layer.
Hi, When I do the opacity command for the logo and connect it to the slider, the logo disappears?
The top one is suppose to because that's the gradient but if you only have just the logo then you could just leave the opacity or start it from 50%
Thankfully this worked out perfect for me! Thank you for that. The only thing is that now that I got a basic template of this created with my preferences, I want to be able to simply change out the original music to the video audio (Since I'll be using different videos with the same template for gaming). @ 3:05 I noticed you click on the song but that doesn't show for the video I want to sync it to. The video is imported but not shown as an option to sync to. What would you suggest to fix that? @VericDesigns thank you for your time!
Nevermind. Took 3 hours but figured it out lol
How did u do I want to use different videos but the wave keeps syncing with the ancient audio, even if I changed every parameters
Do you know how I can translate this "wiggle(effect("Wiggle - rotation")("Wiggle Speed (wigs/sec)"), effect("Wiggle - rotation")("Wiggle Amount (degrees)"))" into german? It says wrong because its english.
Ahh dam I'm sorry but I don't know any German at all :/ You can try Google translate or look up some German community
I think that the audio to Keyframe command didn't work so well for my song
What computer works best and video editor?
It all depends on how much, the better the more expensive but most modern computers are fine and best editor would be Premiere Pro or Sony Vegas which is easier to learn
Hey, how can i add particles to fly out from the logo? subbed btw
Like my visualizer?
It is not possible in after effects alone you have to use plug-ins for that
why would i donate if it doesnt even work
well it does work for me tho!
yeah it works for me too
pogchamp