Wow.. Thank You so much! I kept entering 4 of the 6 digits hoping some combination would work. You solved the incode/outcode mystery! Thank You so Much! I hope You are doing well! Blessings! Aloha
Does 'Erase all keys' function erase other keys in ECU except the current key? It is good practice to erase old keys before adding new ones. I did 2010 Honda Element without erasing keys and we reached 'Position Ended Message' after reaching 6 keys in ECU.
You are right. If I buy a car with only one original key and the ECU says there 2 keys stored in the memory I would do that. Or if I've lost a key . Just to be sure nobody else has a key. In my case I have all 4 keys.
Hi, Thanks for your video, I have tried to program my key for the 2006 Mazda 6 but I get the message that there is No Loaded Key and try again...I have tried several times on both Type 1 and Type 2 for the Mazda 6 and get the same message. I presume the chip is not being read, it is a 433mhz 4D63 chip, any ideas to help, I am in Australia, Cheers
I know there are two types 4D63 chips - 40 bit and 80 bit. In my case the 40 bit didn't work. Mazda 6 Type 2 I think is the one with a push button for "Start". The only way to be sure you have the right one is to buy OEM Mazda key. The one I used in the video is this one - www.ebay.com/itm/Replacement-For-2005-2006-2007-2008-Mazda-6-Sedan-Key-Fob-Remote/191970203998?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
I would go to "erase all keys" only if I have lost all my keys or if I buy an used car and the number of keys in the car memory is more than the keys I have.
@@samwong8958 That is what I think.. So it should do all keys lost I believe in that scenario. Will have to try that on someone's car lol. I actually have the new SBB PRO2 so far I haven't programmed any new key yet. Failed to connect on some car like Nissan Pathfinder but maybe due to a bad master key.
My SBB programmer is version V 33.02 and I don't see 2010 Mazda 6 on the list. The newer SBB V48.88 has the 2010 model on its list I think. If they use the same programming algorithm you could have a luck. I saw the transponder keys for 2010 and 2007 Mazda are the same. Probably it would work. You don't know if you don't try.
Your English is great! My V33 wouldnt Program a 2008 key from a scrapyard ignition but I will try again soon with a 2010 ignition and let you know for future reference. My ECU would show “disconnected’ then you must remove battery post, touch together terminals to clear it and try again! FYI. Good video.
UPDATE: My SBB V33 would NOT Program the 2010 Mazda 6 key with Mazda Ford, I even tried Mazda 3 2010 selection but no luck, kept getting “ECU Disconnected” Perhaps with the OBD cable 2 that it suggested on my SBB, but I don’t have that cable if indeed it’s and extra or different cable... Had to pay a key guy! Time to upgrade my SBB V33 to V88.,
I bought a key without transponder at Home Depot but I asked the guy to cut this one instead of theirs. Sometimes they can cut it for you for free if you are lucky and the person is in a good mode. I have a bad experience with Ace Hardrware - one good one bad key.
The fourth key was done only for the purpose of this RUclips video. The car is idling high because it was February and the engine is cold. When the engine is on its working temp the idle is 750-800 RPM.
![SahBabii - Viking [Official Music Video]](http://i.ytimg.com/vi/D37cL92JX0I/mqdefault.jpg)
Wow.. Thank You so much! I kept entering 4 of the 6 digits hoping some combination would work. You solved the incode/outcode mystery! Thank You so Much! I hope You are doing well! Blessings! Aloha
You are welcome. Aloha
Will this program a key fob 05 malibu?
great video thanks from the USA
Bom dia amigo. Ela faz ecoesporte 2012?
can u override the transponder from a key, i got a key from a other mazda 6 same model and want to override to work with my car
Does 'Erase all keys' function erase other keys in ECU except the current key? It is good practice to erase old keys before adding new ones. I did 2010 Honda Element without erasing keys and we reached 'Position Ended Message' after reaching 6 keys in ECU.
You are right. If I buy a car with only one original key and the ECU says there 2 keys stored in the memory I would do that. Or if I've lost a key . Just to be sure nobody else has a key. In my case I have all 4 keys.
How can I find out which transponder key I need without using a scanner?
I have a Japanese 2011 Mazda 6 (called Atenza).
I don't know the difference between "6" and Atenza but check this site www.transpondery.com/transponder_catalog/mazda_transponder_catalog.html.
Hi, Thanks for your video, I have tried to program my key for the 2006 Mazda 6 but I get the message that there is No Loaded Key and try again...I have tried several times on both Type 1 and Type 2 for the Mazda 6 and get the same message. I presume the chip is not being read, it is a 433mhz 4D63 chip, any ideas to help, I am in Australia, Cheers
I know there are two types 4D63 chips - 40 bit and 80 bit. In my case the 40 bit didn't work. Mazda 6 Type 2 I think is the one with a push button for "Start". The only way to be sure you have the right one is to buy OEM Mazda key. The one I used in the video is this one - www.ebay.com/itm/Replacement-For-2005-2006-2007-2008-Mazda-6-Sedan-Key-Fob-Remote/191970203998?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
Hi I want to make key for peugeot207 cc I follow the same method. Thank you
Hi there where did you get the programer please
ebay
Will this make a fob for a 05 malibu?
I don't know. Sorry.
Spasibo
Sam Wong
Пожалуйста.
i lost my key 07 mazda 6 how can i find the key code in the car
Without a key programmer I don't know how you can find the code. I think for every new key the CPU gives you a different code.
Is erase all keys menu for all keys lost programming ?
I would go to "erase all keys" only if I have lost all my keys or if I buy an used car and the number of keys in the car memory is more than the keys I have.
@@samwong8958 That is what I think.. So it should do all keys lost I believe in that scenario. Will have to try that on someone's car lol.
I actually have the new SBB PRO2 so far I haven't programmed any new key yet. Failed to connect on some car like Nissan Pathfinder but maybe due to a bad master key.
@@jamescc2010 how is working you SBB pro 2 I just received mine bro and I don't know if it's good ?
Hello sorry just I want to ask you a question is this work for Mazda 6 2010
My SBB programmer is version V 33.02 and I don't see 2010 Mazda 6 on the list. The newer SBB V48.88 has the 2010 model on its list I think. If they use the same programming algorithm you could have a luck. I saw the transponder keys for 2010 and 2007 Mazda are the same. Probably it would work. You don't know if you don't try.
Your English is great! My V33 wouldnt Program a 2008 key from a scrapyard ignition but I will try again soon with a 2010 ignition and let you know for future reference. My ECU would show “disconnected’ then you must remove battery post, touch together terminals to clear it and try again! FYI. Good video.
UPDATE: My SBB V33 would NOT Program the 2010 Mazda 6 key with Mazda Ford, I even tried Mazda 3 2010 selection but no luck, kept getting “ECU Disconnected”
Perhaps with the OBD cable 2 that it suggested on my SBB, but I don’t have that cable if indeed it’s and extra or different cable...
Had to pay a key guy!
Time to upgrade my SBB V33 to V88.,
Спасибо.
Пожалуйста.
Who cut the key for you?
I bought a key without transponder at Home Depot but I asked the guy to cut this one instead of theirs. Sometimes they can cut it for you for free if you are lucky and the person is in a good mode. I have a bad experience with Ace Hardrware - one good one bad key.
Why do you need to have 4 keys for 1 car? And why is the motor idling at 2000 RPM? It should be 850-1000 RPM ;)
The fourth key was done only for the purpose of this RUclips video. The car is idling high because it was February and the engine is cold. When the engine is on its working temp the idle is 750-800 RPM.