Thank you. I almost did the dumb thing and used flex seal. I ordered One tube of what you recommended. Lol I should’ve watched further in your video and realized how much you were using. Had to turn around and order a five pack. And thanks for the tip at the end because I was going to skip the wire brush and get what I needed for my drill. Now I have to shop for a wire brush :-) thanks to you I’ll get the job done right now I really appreciate you taking the time to put in this video up
I searched the jungle website for "hot chisel" but this device hasn't been invented yet. Think I'm going to try a really long chisel and heat the end with a torch and see if that method works. Probably won't since the heat will run up the metal and burn through my welders glove and won't be able to get a decent grib with a vice grip on the end of the chisel.
I used a torch on low and a putty knife. Comes off easy. Doesn't need much heat to soften up. Finished up a wire brush in my drill, beats manually brushing.
I removed even the old sealant the previous home owner used and brushed the joints down to bare metal. Didn’t use flex seal but I did use the gorilla glue rubberized spray version and my gutters are still going strong 4 years later in central FL. Can’t speak on flex seal but the gorilla brand is great
Thank you! After a winter of several warm spells followed by severe freezes, multiple corners on the eaves are leaking this spring. A local store recommended the product you find not so great. Thanks for teaching how to do a good job and what product will last.
I think it would be a good idea to cover the cured sealant with a flexible flashing tape that builders use. Maybe even multiple layers to protect the sealant from UV rays and extend the life.
Thank you. Very helpful for car leaks, too, where metal pieces bond. I didn't catch the name of the other sealant besides Geoseal. Sounded like Astooroof. (?)
I’m not throwing shade bro, but your heavy glue seams will create damming issues with debris. Geocel 2300 clear is a great product that I don’t need to build so heavy after a good scraping and cleaning
What I never understood is how, with the MOUNDS of goop in there, does the water flow past it? Which I feel may be the cause of the issues in the first place.
This is how not to reseal a corner. Is that your toothbrush 😅 First off get a wire brush for your drill, but be careful not to burn a hole in the metal. Get rid of all of the old goop better to get down to bare metal, you will get a better adhesion, then you goop it. Put tons of 2320 its self levels make sure to taper the ends of the joints to zero so water cant get under the joint and lift it.
I repair guy put the flexseal on the corner joint in the connector of the corner joints. It is leaking again. What is the best method to remove the flex seal? Thanks
I got the GS121 gutter sealant and it says it is not recommended to tool or smear sealant like you do in the video. DO you think it would work without smearing it and just putting a thick bead on? Not sure what to do...
I have leaking gutter joins and the gutters are only a couple of years old. Its very very had to clean properly because my roof is a tin roof and it overlaps the gutter a bit. Very hard to gut my hand or brush right at the back of the join :(
How does that work when you are 6 m. off the ground and the gutter is obscured by 5 cm of shingle over hang and a ragged sharp corner deflector. Not finding fault but not really real world.
This is defiantly a simplified example, we just wanted to show you the concepts we use to reseal joints effectively. We plan on making a video that will demonstrate doing all these principles on an actual house in the future!
Show me that it won't leak! Plus, that dam that you built will only hold water in the gutter and not let it flow out. Which will cause extra rot in the gutter or the wood behind it. #NotAFix
@Michael Gerber This is not why I came to his video! I wanted the video maker to show me how it's done for me to give a like and share to his videos you idiot. I tried it his way and it didn't work, do you have any other suggestions. Maybe I can like and share your videos or dislike them if they don't work. You don't have to be an a hole your whole life... I'm just trying to find a solution to my problem.
This is the standard as far as sealing miters. How many miters you done on how many houses in your gutter career if you’re such an expert. You don’t as for an expert opinion then tell the expert they’re wrong. You do that shit at the doctors office too?
Great video! Thanks for the info on the sealant that you prefer and why! Love the small wire brush. A little elbow grease never hurt anyone, if you only have a one or two to repair. Again, great tips.
Great video. Now, if I can just get all my gutter corners sitting on a table, it will be a breeze to repair.
Lol right but im y65 year old female and had no clue shi it was very helpful seeing how he did what! Thanx !😊
Thank you. I almost did the dumb thing and used flex seal. I ordered One tube of what you recommended. Lol I should’ve watched further in your video and realized how much you were using. Had to turn around and order a five pack. And thanks for the tip at the end because I was going to skip the wire brush and get what I needed for my drill. Now I have to shop for a wire brush :-) thanks to you I’ll get the job done right now I really appreciate you taking the time to put in this video up
Those old sealants can be hard as concrete. Use a heat gun and a putty knife, it makes this job so much easier.
I searched the jungle website for "hot chisel" but this device hasn't been invented yet. Think I'm going to try a really long chisel and heat the end with a torch and see if that method works. Probably won't since the heat will run up the metal and burn through my welders glove and won't be able to get a decent grib with a vice grip on the end of the chisel.
Use a torch and putty knife
Can here to say that, I used a heat gun
I used a torch on low and a putty knife. Comes off easy. Doesn't need much heat to soften up. Finished up a wire brush in my drill, beats manually brushing.
I removed even the old sealant the previous home owner used and brushed the joints down to bare metal. Didn’t use flex seal but I did use the gorilla glue rubberized spray version and my gutters are still going strong 4 years later in central FL. Can’t speak on flex seal but the gorilla brand is great
Exactly what I needed to fix my leaky corner gutter. Thanks!!
Thank you! After a winter of several warm spells followed by severe freezes, multiple corners on the eaves are leaking this spring. A local store recommended the product you find not so great. Thanks for teaching how to do a good job and what product will last.
Glad we could help!
Anybody said you have a slight resemblance of Ron Howard from Happy Days?
Really useful to see how much of that sealant you use. Thanks!
From Malaysia Terima Kasih (thank you my friend)
I think it would be a good idea to cover the cured sealant with a flexible flashing tape that builders use. Maybe even multiple layers to protect the sealant from UV rays and extend the life.
Covering it up may prevent it from ever drying out, May speed up disintegration.
Why are the beads so high? I slwsys see water and material backed up because it can't get over bead
Thank you. Very helpful for car leaks, too, where metal pieces bond. I didn't catch the name of the other sealant besides Geoseal. Sounded like Astooroof. (?)
Splendid, exactly what I was looking for, thanks!
Thanks so much. Excellent information!! 👍
I’m not throwing shade bro, but your heavy glue seams will create damming issues with debris. Geocel 2300 clear is a great product that I don’t need to build so heavy after a good scraping and cleaning
It shrinks and settles when its dry to about 1/3 the thickness of application
Thanks
Can't wait!
🙌
Thanks for the video great tips.
Glad it was helpful!
What I never understood is how, with the MOUNDS of goop in there, does the water flow past it? Which I feel may be the cause of the issues in the first place.
The glue shrinks as it dries. 1/8 deep is average after drying
This is how not to reseal a corner. Is that your toothbrush 😅 First off get a wire brush for your drill, but be careful not to burn a hole in the metal. Get rid of all of the old goop better to get down to bare metal, you will get a better adhesion, then you goop it. Put tons of 2320 its self levels make sure to taper the ends of the joints to zero so water cant get under the joint and lift it.
He mentioned that option.
Thank you!
You're welcome!
Which "Through The Roof" sealant product(s) do you suggest as an alternative to "Geocell 2320"? Very helpful video!!! Thank you.
I repair guy put the flexseal on the corner joint in the connector of the corner joints. It is leaking again. What is the best method to remove the flex seal? Thanks
I have left over roof cement. Will that work?
I got the GS121 gutter sealant and it says it is not recommended to tool or smear sealant like you do in the video. DO you think it would work without smearing it and just putting a thick bead on? Not sure what to do...
I have leaking gutter joins and the gutters are only a couple of years old. Its very very had to clean properly because my roof is a tin roof and it overlaps the gutter a bit. Very hard to gut my hand or brush right at the back of the join :(
Those spots are tough! Gloves help and we also use this Makita 90 degree angle impact amzn.to/2UelK1d with a wire wheel to tune the joints
When’s the next one?
We are shooting for a video every week. Thanks for watching!
Looks easy, what about when hangers and the roof in the way. Better off just replacing the gutter.
That must be the worst internal corner I have seen. The top lip has a huge gap
How does that work when you are 6 m. off the ground and the gutter is obscured by 5 cm of shingle over hang and a ragged sharp corner deflector. Not finding fault but not really real world.
This is defiantly a simplified example, we just wanted to show you the concepts we use to reseal joints effectively. We plan on making a video that will demonstrate doing all these principles on an actual house in the future!
My rain gutters are attached to my roof, so this isn't very helpful. Thank you though.
Show me that it won't leak! Plus, that dam that you built will only hold water in the gutter and not let it flow out. Which will cause extra rot in the gutter or the wood behind it. #NotAFix
We've done 1000's of these and they have worked for us!
@@StartARainGutterBusiness And they will all failed sooner or later.
@Michael Gerber That's not a good fix, because it doesn't work.
@Michael Gerber This is not why I came to his video! I wanted the video maker to show me how it's done for me to give a like and share to his videos you idiot. I tried it his way and it didn't work, do you have any other suggestions. Maybe I can like and share your videos or dislike them if they don't work. You don't have to be an a hole your whole life... I'm just trying to find a solution to my problem.
This is the standard as far as sealing miters. How many miters you done on how many houses in your gutter career if you’re such an expert. You don’t as for an expert opinion then tell the expert they’re wrong. You do that shit at the doctors office too?
Great video! Thanks for the info on the sealant that you prefer and why! Love the small wire brush. A little elbow grease never hurt anyone, if you only have a one or two to repair. Again, great tips.
Thats how i sealed my gutters and I thought that looks like shit. But if a pro could do it, I could do it too.
Geocel 2320 isn’t available in the UK. Any suggestions on what I could use instead?
Thanks
Where are you located? I need someone to fix my gutters?
Really appreciate this video.
We use plastic gutter systems here in UK. Good video
Great walkthrough -
Thanks for posting
Hooray, corners!
Thanks brother, great video.
Thanks you sir
will GE silicone sealant work to steal gutters?
If you can, use gutter sealant. Seal inside your parts and the outside. Shouldn't have to worry for many years to come
Great video!!! Finally explains why my fixes never worked. Thanks. Now I just gotta find me some of that GeoCel 2320 up here in Canada.
Glad we could help!
Ebay
Can i use roof cement to seal as well ?
We would not recommend using roof cement. We use Geocel 2320 Sealant
You can also buy gutter sealant at a local hardware store, just make sure they are designed for the same material as your gutter.