Straight Piping My BMW E60 525 Turbo With Custom Exhaust!
HTML-код
- Опубликовано: 18 фев 2023
- In this video I straight pipe my BMW E60 525 Turbo Diesel with a custom welded exhaust with parts found in my basement. It did not turn out as I hoped..
Subscribe and like the video for more!
Aldersgrense A tillatt for alle.
This is my BMW E60 525d 2004 model with a M57 2.5 straight six engine with a 6 speed manual transmission. What do you think about the sound?
Hope you enjoy! 
Авто/Мото
Well, this did not turn out as planned...What do you think of my welds? Haha! Smash the like button and subscribe with notification!
You did you best, it looks okay. You should add a catalytic converter. That will reduce the CO2 emissions on your car. If it's legal in Norway.
@@richiericha.k.ajdmcardriver he should not, it would never heat up the way it is and it is diesel. he has an dpf on that car, you've never played with diesels before?
@@Tuoppi39 Nah, I haven't. I don't even have a car yet. Not even a licence. Soon, I need to do my driving test.
Full straightpipe with downpipe is the way to go. No dpf, no cat, no muffler. Will sound awesome in that case!
Very entertaining video though🔥🔥
If you empty the DPF filter, it should sound a lot better
Yeah I will try that! DPF is the one under the car right? Not in the downpipe?
@@FahreFilms dpf is in the downpipe, its like catalitic converter but in diesel.
@@Maxymiliang no… On the preface 525d the DPF is under the car. CAT is in the downpipe.
I own a e60 525d myself and knows the car inside out.
@@Maxymiliang I'll correct you a little bit - So it's a pre-lci , so it does have Catalytic converter and a DPF filter , that's why there is a box in the middle . First one from turbo is Cat , and than in the middle is DPF . Later Lci models came with one peace after turbo - 50% cat which is first , and the rest 50% is DPF , so 2 things in one box .
on any diesel with a dpf filter removing the muffler won't do anything you are going to have to gut the dpf and then it will sound nice:)
Maybe my old E46 320d already had a DPF delete when I removed rear muffler, because that made more noise than this 😂
@@FahreFilms I don’t think the e46 have dpf
@@FahreFilms yeah e46 doesnt have a dpf, they became mandatory in 2009 but most cars had them a couple years earlier.
@@CrazyByRommelsjo e46 have dpf above 2004 year. With euro4 mark. My e46 touring is 2002 nov. and it doesnt have dpf because it is euro 3. My friend haved exactly same model only 2004 and that was equiped with dpf and had euro4 mark.
This video bring me memories form my first welding, soooo nostalgic
Got to start somewhere 🙏🏼☺️
kjekt å se detta. God underholdning.
the Biltema exhaust pipes have some (alu?) coating on them, i always use a wirebrush/wheel - it makes the welds 10x better. Also i have the exact same welder, its "great" once you get used to it
The DPF must go, I have a e90 320d (m47) no DPF, no cat, and a 4" tailpipe. sounds quite good, for a fourbanger atleast.
I had my car for its MOT/PKK at the end of 2022, put on the original exhaust (with the gutted DPF ofc) and the sound was still nice... so I would highly suggest DPF delete for the sounds
Okey, I will try to brush it next time and hopefully the welds will look better :) Next up now is to remove the DPF ! Any problems with MOT EU controls with gutted DPF?
@@FahreFilms well, not really, i was quite clever when i gutted the dpf on my e90, i carefully removed the heatshield cut the dpf open, removed the internals and welded it shut, put the shield back and looks stock😅 no complaints from the MOT/PKK guys
Great job bro
You gotta go full straight pipe to make these bmw diesels sound any good😅
Now I’m excited to remove the next muffler! Hopefully it’s get better! What do you think?
@@FahreFilms From my experience dpf/cat(first one from engine side) depending on what you have on your car. Is the one which changes the sound the most.
i just made custom exhaust for my 530d, made custom downpipe and bourght out exhaust from both sides, sounds awesome and looks good :D
Nice bro, I got into ur vids because I have the same car
Cool ! Good cars 👌🏼 What model and engine? Manual?
😂😂
welding is addictive!!
the fastest i have ever clicked on a video...
Thanks man! So happy to hear 🙏🏼 What do you drive?
@@FahreFilms Mercedes c200 2012 😕
Wheight reducion aproved
Yeah that muffler was heavy!
Hvilket sveise aparat er d?
Take dpf off then it will sound.
Hope so! Have you tried it?
Se på mye sveisevideoer på youtube :), det hjelper helt insane!
Skulle hatt straightpipe, stage 2 og en syk hardcut :)
Får 237hk ish på stage 2 på disse, de flytter seg ganske greit med det og :) tuna flerre av de :)
Bruk større størrelser på eksosrørene så skar det bli dypere og penere lyd. Og klask på en 3,5’’ dieselstuss så skar det bli bra tenker je😎
Beste er å kjøpe seg en downpipe🙂 eventuelt kan du stake dieselpartikkelfiltert😄 er den som tar meste av lyden!
goddamn that welding hurt me 🤣🤣
Flux core is already bad enough, combine that with not cleaning the parts before welding and. . .yeah
But it's not stupid if it works
@@sampuhhupmas5666 shouldve sprayed brake cleaner in the pipe before welding too :DD
@@sampuhhupmas5666 I have not idea what i’m doing here as you see. Do I need to clean it when the piping is brand new? 🤷🏼♂️
@@dexter8384 what? Inside the pipe? Why? 🤷🏼♂️ I’m a newb 😂😂
@@FahreFilms It was a joke haha, it would spark up and make a huge flame if you did that, quite dangerous. I do recommend for u to learn how to weld properly its a good skill to have :)
welding without gas will never be a nice weld
please just buy a straight pipe from ebay. It's bold on and it doesn't cost that much and looks million times better :/ I understand that it's your first time welding (I never welded in my life) but you just wanted to rush to finish your little project which I also do sometimes xD But please just buy an exhaust from ebay...can't be more than 150euros
Will be better welding if you used a glove on your other hand. To keep the welder still in the meantime you weld - Too much heat will make the tube to "pop" (making a hole). Looks like the tubes is stainless steel which means you can weld in it. you can mabyee remove it with a angle grinder
Hi!!
Akrapovic endestusser er fett på, kode inn hardcut å, anbefaler egentlig ikke hardcut for motoren
noice
Yeah ✨🔥
putt on downpipe
That would help, but it’s expensive!
Maybe do a Hybrid turbo? 😁 Mine is stock i wanna do that maybe
That would be supercool! But expensive. And then I should fix alot of other parts in the process, you have 2.5 or 3 liter M57? Manual?
@@FahreFilms shouldnt be that expensive I think, its not r34 hahha, I have 525d 2.5 m57 but its automatic
@@FahreFilms it's really simple, just plug and play the 530d turbo (gt2260v) and you can go up to ~270hp (that's the injectors bottlenecks). With upgraded injectors (535d/50d) and upgraded compressor wheel you can expect ~350hp. This car came with the r90 diesel pump, the best pump in this generation (the 530d use the worst r70).
For 400/500hp you need a bigger turbo, probably borg warner s360v.
For 600/700 there are some triple turbo setups with dual fuel pump
@@frederick_marshall i think turbo on 525d and 530d from 2005 (non facelift) are the same
@@tonyvideochannel6871 absolutely not, one is gt2056v the other gt2260v
Probably the worst weld I’ve seen laid my eyes on. No hate tho first time for everything but i would have practiced on scrap before going straight to it. Keep it up
You should chip tune it🔥
Yeah! How much power can this 2.5 liter get ?
@@FahreFilms stage 2 will give you 223 hp!
@@FahreFilms around 215 hp normal chip brother
Downpipe will fix you problem😂👍
This was really bad! On a petrol straight six BMW removing the rear muffler does alot! But on this next to nothing ! :)
@@FahreFilms Can confirm, when i removed the rear muffler out of my old E60 525i LCI it sounded perfect to my ears
@@Makjeh downpipe is so expensive 😅 And the DPF is under the car so maybe that’s next 🤷🏼♂️ The Downpipe is catalytic converter I believe 🤷🏼♂️ Do you know?
I don't think diesel sound is something you or anyone around you very much enjoys to listen, it's best kept silent. Also visit any muffler shop, I visited one next to me and this old guy was so cool I thought he would judge me but he was excited as much as I was, he did a very clean straight pipe install for 20 euro, even fabricated 2 brackets to mount it on original rubber hangers and all, I did bring with me a stainless pipe I picked out earlier in a local metal warehouse from scrap pile for 6 euro
everbody loves a straight piped 12v cummins😍
Pls weld the diff! 🙏🏻
I want u to to that to my f30 is good job (black job) will give u 100 bucks
Downpipe vil legge til mest lyd
take on downpipe than it sounds good
It’s expensive 🙃 Want something cheaper!
@@FahreFilms open the dpf and take all out and weld it
"525 turbo" :D
Buy an 1.9 tdi and tune it
you need to remove the DPF and catalytic converter for a nice sound
come on, calling your car a 325 turbo is a massive clickbait, every diesel bmw has a turbo...everybody knows
That's awful...do a downpipe
I got sick watching you weld.. go get it done properly please
Diesel sound bad.. 🙄
magma flow
Yeah That’s would probabaly make some good sounds! But right now I need more noise, not less 🙃 Have you tried any Magna Flow?