Thank you for the great video. Thank you also for making the offering to help others out with that lens, very community minded of you!! All the best to you and yours, Bill
I love the innovation! Your idea on making the counterbalancing weights is incredibly helpful. I'm using my Inspire 1 and zenmuse x5 for research currently, and having the ability to raise the magnification i'm getting in photos will be incredibly helpful.
Great stuff, is this a Inspire 1.0, we are thinking of adding the X5 to our 1.0 wondering how it flies , battery life? Read a few people suggesting not to do it. Thanks
How nice to help Really seeing a market for ultralight lenses Ie nikon 100 e etc Will x series allow adapted lens? All manual focus ie using as zoom hyperfocal. ?
Hi Cory. I have just purchased a Lumix 45-175. Having tested it briefly on on the inspire I can report that this may be the one to go to. At 210g with internal zoom AND zoom controllable from the app. It has the same issues of focus as the 45-150. This could disappear when it is set up properly. Are you still casting the 45-150 counter weights? Would I be able to have a set please? I will post a vid when I get this set up properly. I have a 35-100 set up and running. Goes like a charm. Thank you for posting your videos. They have suggested a number of alternatives. Garry
Hi Cory. I appreciate your taking the time to document your experiment. Like others I'd love a set of weights for my X5. I'd though I was limited to the 14-42mm until I saw this. Are you still making these for Lumix 45-150mm lens/DJI X5 owners?How can I get a set? As others have offered, I can send you some $ via PayPal if you're still interested in doing this? Also, I bought a new Inspire 2, and the gimbal is naturally newer and different ... much easier to balance on the back end because its an open area all-round perfect for s simple shallow hemisphere. So I am going to follow your lead (with lead : ) and make a hemisphere for the X5 on the I2. Do you own the Inspire 2, yet? Also, I saw that someone took issue with your using a heavier lens. Did he convinced you'd damage the gimbal with the heavier lenses - is there any evidence for this is just someone's (untested) opinion?
Hi Cory, well done. I might have missed it in the previous clip of the 35-100...but does the auto-focus detect the lens and if so, how effective/efficient is it. Secondly, could you post some flight time with these lens in action? Finally, is this lens combo adaptable to the osmo handle? Many Thanks, Geoff
Hi Geoff. The 35-100 auto focus works fine. No problems there. It is very responsive, and accurate. Just as you are used to on any other "deemed compatible" lens. However the auto focus on the 45-150mm does not appear to work at this stage. It tries. And even moves the focus (some info getting through) but then it gives up, and pops up the error message saying it cannot detect the lens. As for OSMO, yes. This combo is for the X5. As the X5 simple mounts directly onto the osmo just the same as it would the inspire, it works just the same - although, at 750grams, plus the osmo, your arm might get tired!!
Cool video! I saw the post in the Inspire FB group, though I guess Lynh Phan shot down the ides as it may wear down the motors. Anyway, I'm wondering if you may have a more simple balance solution. I'm trying to use the sun shade for the Olympus 12mm lens, but it's 26 grams. I put Velcro on the back of the camera, and tried to get 4 quarters on therefor balance, but it inhibits the gimbal movement. I have a 22g shade on order, but I think I'll run into the same problem. I really want a sun shade on that 12mm. Any suggestions, short of smelting lead LOL? Thanks
Hey mate. Thanks. Yes, Lynh did shoot the idea down. First I will add that I have been keeping a very close eye on the gimbal motors, and they are not under any strain. I have run experiments before where I intentionally overload the gimbal motors, and they get hot in these experiments. The 45-150mm lens and counterweights (when balanced) do not overload the gimbal. It is totally fine - I'm not naive to the idea, I am an electrician by trade, and have a solid engineering background. Okay, on to your problem. Yes, the issue is that quarters simply don't weigh enough! Lead works perfectly. Don't be turned off the idea, it's very very simple to work with. It melts at a low temperature. Simply make a mold but using the base of a soda can. Pop in on your stove top (or preferably outdoor barbecue) and drop lead sinkers of the correct total weight into the tin mold. Allow it to fully melt, then turn the heat off. It will cool very quickly. It's very easy to do. Trust me! :)
Can someone advise of the actual exact Manufacturer Part Number? Some lenses for purchase show an "HD" on the ring and some don't. I want to be sure I buy the right one. Also, anybody have an idea about gimbal motor loading & wear over the Long term?, Alex
I have a 40-175 power zoom, that is about the same size. it weights 10 grams more, 210 grams, and has a longer moment arm fully extended. Wondering if that would fit. Do you fly your's fully extended? Or do you change it in and out, and if so, how does the gimbal handle that.
My opinion in the longer run (gimbal over loan) will appear in the screen app. In order for this to work.the the gimbal needs to be a slight bigger to handle that type of lens..
Cory I have a X5S with an Olympus 40 - 150mm lens that requires balancing, would you consider making and sending counter weights to the UK for a fee? Thank you in advance
have you tried bringing the shaky footage into After Effects or Premiere and applying a Warp Stabilizer at around 1-10% (not a high value)? This should remove all the bumps and not produce too much cropping. If you shoot in a high shutter speed then there wont be any motion blur artifacts when the camera shakes. After stabilization using After Effects you can re-apply motion blur using "Pixel Motion Blur" effect or "Force Motion Blur" effect if you want that 'cinematic' look.
Hey Corey Great vid. Thanks. Couple of things. Search google for 3m dual lock thin. That's what I use. Also need to cover up that plastic part you removed. You could print a thinner cover part to fit in there. Do you have the aerial video at 150mm?
Hey mate, thanks. I hadn't heard of dual-lock thin, I'll look it up. Cheers. This other 3M product works perfectly for this application though. As for that cover I removed, I entertained the idea of printing one, but it's a real struggle for room. it would not be easy. Although probably possible. The cavity behind the cover is already open-to-atmosphere even with the cover attached. It was never IP sealed in the first place, there's a big slit in the front, so I'm not too worried about it. I'll get some footage up sometime. Just been busy. I use this lens a lot, but my inspection work can't be shared, unfortunately. I have made about 5 of these counterweights. Sign out if you want one, I can post to you. Cheers, Cory.
Hi Chuck. Lumix G Vario PZ 45 - 175 Power O.I.S/S.O.I Puissant Power Zoom/Zoom Puissant. Was the description on the box. Panasonic H-PS45175. H-PS45175E-K I think is the model number. Mine cost some NZ$500.00. Good luck with yours I hope it works for you. I am rather impressed with the zoom. The autofocus does not work properly yet but that may change when the lens is calibrated. Still haven't got it set up properly yet. Very untidy counter weights. No where near as neat as Cory's
chuck spoto I have the 45-175, the zoom works in the stock app. The AF still doesn't work on the X5, but on the X5S (I2) it seems to work, albeit flakey. Cory.
evolvedm0nkey hey mate, yeah. Just fixed zoom. Ground adjustable. I suppose I could make a few different weight sets for different focal lengths, but I just leave it at 150mm for the work I do with it.
Hi was great to see your videos I would be happy to make the parts for you. Out of metal and extra parts laser machined for u and magnet attached too for a quick attachment and detachment release. Let me know if u are intreasted. U would have to send me the lens parts that need attachment and the plate that you removed from the x5. I dont need any other stuff. Once you are happy with it we can go into a joint venture where u can control the sales for future clients. Let's call it CIS custom issues solved . Cheers
Hi Cory, I well understand and see is a very simple task. I worked for many years with machine tools, lathes, milling machines, etc., electronic and electrical assembly, but now, in the place where I live, and with continuous commitments, all the smallest things to do becomes for me an obstacle. I ask, could you make for me a couple of these weights for the 45-150 and a couple for the 35-100, with the same velcro you used, and then send it to me in Italy? I can pay with Paypal.
Absolutely I can. That is what I have offered in the video. Now that I have the perfect shape, I can simply cast a copy in plaster. I will do this through the week, and let you know when I'm done. In the meantime, purchase your lens, and we will get it working together.
Ok, but now I have just bought the pancake Panasonic Lumix G X Vario PZ 14-42mm instead the similar Olympus that I have seen in a video, I hope it have no problem and it does not need to add balancing weight. Seem that Panasonic is optically a little better, looking at photozone.de test. www.photozone.de/m43/765_pana14423556hd
+Claudio Costerni the 14-42 should work fine. I do not own it, but I think it works right out of the box. It will not require any difficult balancing. It should just work. I'm very interested in the Olympus 40-150mm. Can you please measure the diameter of your lens (down near the mounting flange) and the fully extended length, also. I've read this lens is 180grams. Can you weigh it and confirm? We can work together to get this one going.
oldest rule in the book.... no photo it didnt happen... in this case,, why in the world you think you could show us this with out showing this "amazing tele footage"
Thank you for the great video. Thank you also for making the offering to help others out with that lens, very community minded of you!! All the best to you and yours, Bill
I can't wait to see some footage from this set up!
I love the innovation! Your idea on making the counterbalancing weights is incredibly helpful. I'm using my Inspire 1 and zenmuse x5 for research currently, and having the ability to raise the magnification i'm getting in photos will be incredibly helpful.
Id love to see some footage from the lens in flight. See how well the X5 stabilizes such a long lens.
cool, I change totally my concepts about Zenmuse Gimbal for lens, it's amazing choice for who have Osmo to.
Great stuff, is this a Inspire 1.0, we are thinking of adding the X5 to our 1.0 wondering how it flies , battery life? Read a few people suggesting not to do it.
Thanks
How nice to help
Really seeing a market for ultralight lenses
Ie nikon 100 e etc
Will x series allow adapted lens? All manual focus ie using as zoom hyperfocal. ?
Hey, great video. Thanks! Do you think that it is also possible to mount a
H-FS14140 LUMIX G VARIO 14-140 mm
on the X5
your awesome man. like it.
Hi Cory. I have just purchased a Lumix 45-175. Having tested it briefly on on the inspire I can report that this may be the one to go to. At 210g with internal zoom AND zoom controllable from the app. It has the same issues of focus as the 45-150. This could disappear when it is set up properly. Are you still casting the 45-150 counter weights? Would I be able to have a set please? I will post a vid when I get this set up properly. I have a 35-100 set up and running. Goes like a charm. Thank you for posting your videos. They have suggested a number of alternatives. Garry
Good work!
Corey how did the image turn out? I am having jello / shaky images with the 45mm. I would like to see some of your footage
thanks
wonderful!!!
Hi, do you have a problem with the 45-100 lens? Can you process RAW photos in Lightroom? I have a mistake and I can not do it
Cory are you still making the weights for the 35-100mm lens for the x5. If so could you please send me the information on how to get 1 or 2.
Thanks
Since I've update de firmware, the gimbal is floating. Do U have this mistake too?
Hi Cory. I appreciate your taking the time to document your experiment. Like others I'd love a set of weights for my X5. I'd though I was limited to the 14-42mm until I saw this. Are you still making these for Lumix 45-150mm lens/DJI X5 owners?How can I get a set? As others have offered, I can send you some $ via PayPal if you're still interested in doing this?
Also, I bought a new Inspire 2, and the gimbal is naturally newer and different ... much easier to balance on the back end because its an open area all-round perfect for s simple shallow hemisphere. So I am going to follow your lead (with lead : ) and make a hemisphere for the X5 on the I2. Do you own the Inspire 2, yet?
Also, I saw that someone took issue with your using a heavier lens. Did he convinced you'd damage the gimbal with the heavier lenses - is there any evidence for this is just someone's (untested) opinion?
Why didnt you fly that thing?
Great video! I need a zoom lens and this might take it
Hey. can i use another 175mm lens from sony manufacturer?
Wich bajonett has a zenmuse x5? Olympus? I think it is better, to take original lenses.
How much maximum weight X5 supports?
Hi Cory, well done. I might have missed it in the previous clip of the 35-100...but does the auto-focus detect the lens and if so, how effective/efficient is it. Secondly, could you post some flight time with these lens in action? Finally, is this lens combo adaptable to the osmo handle? Many Thanks, Geoff
Hi Geoff.
The 35-100 auto focus works fine. No problems there. It is very responsive, and accurate. Just as you are used to on any other "deemed compatible" lens.
However the auto focus on the 45-150mm does not appear to work at this stage. It tries. And even moves the focus (some info getting through) but then it gives up, and pops up the error message saying it cannot detect the lens.
As for OSMO, yes. This combo is for the X5. As the X5 simple mounts directly onto the osmo just the same as it would the inspire, it works just the same - although, at 750grams, plus the osmo, your arm might get tired!!
Awesome video man can you do and post videos of you flying the inspire because that would boost your channel and I believe you can creat great content
Hi Cory, how can I contact you? I'm interested in purchasing the weights
Cool video! I saw the post in the Inspire FB group, though I guess Lynh Phan shot down the ides as it may wear down the motors. Anyway, I'm wondering if you may have a more simple balance solution. I'm trying to use the sun shade for the Olympus 12mm lens, but it's 26 grams. I put Velcro on the back of the camera, and tried to get 4 quarters on therefor balance, but it inhibits the gimbal movement. I have a 22g shade on order, but I think I'll run into the same problem. I really want a sun shade on that 12mm. Any suggestions, short of smelting lead LOL? Thanks
Hey mate. Thanks.
Yes, Lynh did shoot the idea down.
First I will add that I have been keeping a very close eye on the gimbal motors, and they are not under any strain.
I have run experiments before where I intentionally overload the gimbal motors, and they get hot in these experiments.
The 45-150mm lens and counterweights (when balanced) do not overload the gimbal. It is totally fine - I'm not naive to the idea, I am an electrician by trade, and have a solid engineering background.
Okay, on to your problem. Yes, the issue is that quarters simply don't weigh enough!
Lead works perfectly. Don't be turned off the idea, it's very very simple to work with.
It melts at a low temperature.
Simply make a mold but using the base of a soda can. Pop in on your stove top (or preferably outdoor barbecue) and drop lead sinkers of the correct total weight into the tin mold.
Allow it to fully melt, then turn the heat off. It will cool very quickly. It's very easy to do. Trust me! :)
Can someone advise of the actual exact Manufacturer Part Number? Some lenses for purchase show an "HD" on the ring and some don't. I want to be sure I buy the right one. Also, anybody have an idea about gimbal motor loading & wear over the Long term?, Alex
I have a 40-175 power zoom, that is about the same size. it weights 10 grams more, 210 grams, and has a longer moment arm fully extended. Wondering if that would fit. Do you fly your's fully extended? Or do you change it in and out, and if so, how does the gimbal handle that.
Conrad Senior yeah mate. It does fit. And works. AF still doesn't work on the X5, but works (albeit flakey) on the X5S
Does the power zoom functionality still work?
My opinion in the longer run (gimbal over loan) will appear in the screen app. In order for this to work.the the gimbal needs to be a slight bigger to handle that type of lens..
Cory I have a X5S with an Olympus 40 - 150mm lens that requires balancing, would you consider making and sending counter weights to the UK for a fee? Thank you in advance
Hi liamjamescintyre and Cory, the X5S working perfectly for 40 - 150mm lens?, Accounts with a list of compatible targets (lens)?
have you tried bringing the shaky footage into After Effects or Premiere and applying a Warp Stabilizer at around 1-10% (not a high value)? This should remove all the bumps and not produce too much cropping. If you shoot in a high shutter speed then there wont be any motion blur artifacts when the camera shakes. After stabilization using After Effects you can re-apply motion blur using "Pixel Motion Blur" effect or "Force Motion Blur" effect if you want that 'cinematic' look.
Hey Corey
Great vid. Thanks.
Couple of things.
Search google for 3m dual lock thin. That's what I use.
Also need to cover up that plastic part you removed. You could print a thinner cover part to fit in there.
Do you have the aerial video at 150mm?
Hey mate, thanks.
I hadn't heard of dual-lock thin, I'll look it up. Cheers. This other 3M product works perfectly for this application though.
As for that cover I removed, I entertained the idea of printing one, but it's a real struggle for room. it would not be easy. Although probably possible.
The cavity behind the cover is already open-to-atmosphere even with the cover attached. It was never IP sealed in the first place, there's a big slit in the front, so I'm not too worried about it.
I'll get some footage up sometime. Just been busy.
I use this lens a lot, but my inspection work can't be shared, unfortunately.
I have made about 5 of these counterweights. Sign out if you want one, I can post to you.
Cheers,
Cory.
Can you make a flight video?
Dear Cory Jeacocke,
is there any chance of getting to see some footage with this lens?
I was just about to ask the same...
gloplg ....What version did you buy. The one I just tried does not zoom from the app and Goapp said camera not detected.
Hi Chuck. Lumix G Vario PZ 45 - 175 Power O.I.S/S.O.I Puissant Power Zoom/Zoom Puissant. Was the description on the box. Panasonic H-PS45175. H-PS45175E-K I think is the model number. Mine cost some NZ$500.00. Good luck with yours I hope it works for you. I am rather impressed with the zoom. The autofocus does not work properly yet but that may change when the lens is calibrated. Still haven't got it set up properly yet. Very untidy counter weights. No where near as neat as Cory's
Chuck are you using the bog standard DJI app??
chuck spoto I have the 45-175, the zoom works in the stock app.
The AF still doesn't work on the X5, but on the X5S (I2) it seems to work, albeit flakey.
Cory.
The H-PS45175E-K did not work (no ZOOM control or any AF). Are you saying the H-PS45175 does work?
yes
How do you zoom in or out? Do you just leave it zoomed in?
evolvedm0nkey hey mate, yeah. Just fixed zoom. Ground adjustable.
I suppose I could make a few different weight sets for different focal lengths, but I just leave it at 150mm for the work I do with it.
Thanks for the quick response. We were trying it out and quickly realized we need to zoom out while airborne.
I would like some of your weights
Geert Reijnen just make them mate. Easy as.
Hi was great to see your videos
I would be happy to make the parts for you. Out of metal and extra parts laser machined for u and magnet attached too for a quick attachment and detachment release. Let me know if u are intreasted.
U would have to send me the lens parts that need attachment and the plate that you removed from the x5. I dont need any other stuff. Once you are happy with it we can go into a joint venture where u can control the sales for future clients. Let's call it CIS custom issues solved . Cheers
Hi Cory, I well understand and see is a very simple task. I worked for many years with machine tools, lathes, milling machines, etc., electronic and electrical assembly, but now, in the place where I live, and with continuous commitments, all the smallest things to do becomes for me an obstacle. I ask, could you make for me a couple of these weights for the 45-150 and a couple for the 35-100, with the same velcro you used, and then send it to me in Italy? I can pay with Paypal.
Absolutely I can. That is what I have offered in the video. Now that I have the perfect shape, I can simply cast a copy in plaster.
I will do this through the week, and let you know when I'm done.
In the meantime, purchase your lens, and we will get it working together.
I will make you a set for the 35-100mm and also for the 45-150mm :)
Ok, but now I have just bought the pancake Panasonic Lumix G X Vario PZ 14-42mm instead the similar Olympus that I have seen in a video, I hope it have no problem and it does not need to add balancing weight. Seem that Panasonic is optically a little better, looking at photozone.de test.
www.photozone.de/m43/765_pana14423556hd
I already own an Olympus 40-150 mm 1:4-5.6, maybe your balancers are fine as with the Panasonic version.
+Claudio Costerni the 14-42 should work fine. I do not own it, but I think it works right out of the box. It will not require any difficult balancing. It should just work.
I'm very interested in the Olympus 40-150mm. Can you please measure the diameter of your lens (down near the mounting flange) and the fully extended length, also.
I've read this lens is 180grams. Can you weigh it and confirm?
We can work together to get this one going.
oldest rule in the book.... no photo it didnt happen... in this case,, why in the world you think you could show us this with out showing this "amazing tele footage"