Krystian Krychu you are correct to an extent. VCDS on allows you to lower by -15mm. This module will go down to -40mm, and the CETE controller will go to -55mm. Everyone I know that has lowered on VCDS says it rides more rough. That’s not the case with these aftermarket lowering modules.
@pinnacle which lowering module holds better reliability for a 2014 Audi S8 D4, H&R Lowering or the BLE?? I’m interested just need some guidance in regards to both choices. Thank you in advance!
@@andrewfoley8979 I put 20mm rear and 15mm front spacers. Little bit of rubbing from time to time at the front tho. Same size as mentioned above , same wheels as in video. Happy new year!
Авто/Мото
I didn't know the module was so expensive.
Good job. Would you happen to know where the suspension control module is? I have to change one in my A8
Did it affect ride quality? What's the difference vs doing it through vcds?
Did you disconnect the battery before doing this?
Looks perfect. Any idea if I can find a lowering module for a 2019 A8L?
MTM F-Cantronic II AUDI A8 (D5/F8) for air suspension
also does it ride different?
I'm pretty sure you can lower any audi with pneumatic suspension using vcds adaptation
Krystian Krychu you are correct to an extent. VCDS on allows you to lower by -15mm. This module will go down to -40mm, and the CETE controller will go to -55mm. Everyone I know that has lowered on VCDS says it rides more rough. That’s not the case with these aftermarket lowering modules.
So all u did was install that module and it lowered? You didn’t have to do anything to the shocks/springs?
@pinnacle which lowering module holds better reliability for a 2014 Audi S8 D4, H&R Lowering or the BLE?? I’m interested just need some guidance in regards to both choices. Thank you in advance!
Yes I second the motion. I have 2013 D4 S8 and have been wanting to lower it as well. I didn't know about BLE having a module as well.
Not sure why they would have any more information than you. They’re not a dealer for either module.
Hello!
How big are the wheel spacers? I suppose it's on 9J with 275 30 21 tyres? Thanks! :)
Very nice with lowering module!
Would love to know the wheel spacer sizes as well plz
@@andrewfoley8979 I put 20mm rear and 15mm front spacers. Little bit of rubbing from time to time at the front tho. Same size as mentioned above , same wheels as in video.
Happy new year!
@@yavor20v Your timing was perfect! Ordered them today and thanks very much for responding!
i have an s8 too, would love to drop it a little, does this have the ability to drop in increments or is it all or nothing?
StubDepot Tickets Good question 💯
Drops in increments
What year S8 is this? My 2013 has the modules that you show on the left as being on the right behind the large fuse panel.
Scott Nunya that’s a 2015. All the stuff switches around with the facelift cars.
Scott Nunya it’s a 2015. You are correct. The facelift years are opposite of 2013/2014.
Me too. I have 2013 S8 as well
Will this work on an Audi A8L D3?
Sunny Ra Deen no
А для чево эта штука?
A whole year and no response 🤨
Was this like 20mm drop
With the h&r module you can do up to 4omm like 1.5inch
Hands blocking the camera dud