WLTOYS 104001 Brushless 6S - SpeedRun
HTML-код
- Опубликовано: 10 сен 2024
- Wltoys 104001 Brushless - Going from 3S to 6S power. What speeds will we get? First on 22T pinion gear, and then on 27T.
ESC: Spektrum Firma 150A Smart ESC 3-6s
MOTOR: Surpass 2900kv motor
SERVO: 9kg Surpass servo
Other Specs and what not: MOD1 SPUR gear 32T. Topped up the front & rear diff with 10k. Conversion combo bought from banggood.com, but I replaced the 80A ESC with the Spektrum FIRMA 150A. (link: bit.ly/2RLak3i)
Absolutely fantastic speed and great video 😎 I watched it with my morning coffee cheered me right up. Loved you retrieving the car on your bike 😆👍
Thanks! Your nice comment made my day :)
The video was insane. Didn’t expect this kind of content from subscribers below 100k
Wow, kind words! 😊 👍 Thanks😍
That insane sound and dramatic video . Happy to watch this
Thank you
10/10 for catchiness . I normally skip through shit but your editing is on point . Subbed !
Thanks very much :D
WOW thats crazy!!! That its some insane speed!!! Well done mate! Well done 👊
Thanks Kiwis 🙌 💖
I like the exterior battery placement. Reminds me of the old ww2 planes with the wing mounted fuel tanks people mistook for bombs
If this where to be a ww2 plane, its a kamikaze plane 🙈
@@LOLRC I wouldn't want to be surrounded by giant lipos ready to short out and blow in a crash at 110mph that's for sure
@@jeffreybarton3014 Yolo :P
This guy has some soul with the music selection 👍
You deserve way more likes than just 85. Awesome job! I have this car but just did a brushless upgrade and its fun. Can't believe it holds up to those speeds though. Wow!
Thanks 🙌 very kind words. Yeah its pretty unreal when it flies by in those speeds. Sounds like a jet 🛩️
@@LOLRC Im sure the camera sound doesn’t do it justice.
@@TheFrenchPug not really, but its a sweet sound :)
That is crazy fast! Damn bro.. 🔥
Yes, pretty insane 😁 🏎
Man..😍😍
Awesome upgrade💥
Perfect run my friend👌👌
Looking awesome
Kip it up champ👑
Thanks GB! Appreciate it
Location is spectacular great weather. filming and editing is in a class of its own. Yes it's about the car and the speed but you made that so enjoyable to watch. The car sounded like a rocket once half way up the runway, hyper drive haha. 112.5mph sir I commend you in all aspects of your run blumming great job.
Thanks for your kind words!! Glad you enjoyed it :D made my day!
Congrats on your PB and good job putting together the video!
Thanks! But its not the end of the road.. Gotta make it faster 😉
Great vid and you got comedic skills
Oh Thanks! You have a good sense of humor then 😉
Just subbed, building my own right now, only at 65 mph but have new gearing for it. Nice run 👍🏻🍻
65 is not slow with that car. Good job! 👍But yes, it has more potential for higher speeds. Let me know how the new gearing works out! 😊
Great watch and new sub. That's a fast as buggy bro 👍 🇳🇿
Ty!! Its above average fast you can say ;)
Awesome bro..and well done Stallpall..im getting my speed sorted soon..
Ty, Cant wait to see! 🙌
Nice music! and bicycle shadow
Amazing rc 🔥😜👌
🔥🔥🌞
Yeah this story almost same with my hsp redcat, first built was only for fun 3s capable,
And now end up like a missiles on 6s holy smoke,
Man I used the same ec5 connector only,
And huge super cappack,
Man that surpass motor screaming, I'm cheap but I'm powerful 😁👍
New subs man!
Yeah, surpass delivered really good. However, I have now received tp-power motor, will make a video on In after winter 👍
@@LOLRC oh man! TP power is phenomenal 🙆
Man guarantee it went 130 150 mph
Very impressive!!
Thanks :)
Just an excellent movie no wait,? best. R/C movie I’ve ever seen. Fantastic job.Kudos
Wow, hehe! Dont know about that, but thanks for the huge kudos 😍👍
Cool vidéo 👍🏻
Wait..on original diffs? I did not expect them to be that strong and hold up like that 😳
Cant wait to start building a 1/12 speedrunner, will be my first one.
Good luck 🤞
Nicely done mate nicely done.
Thanks mate 🙌 appreciate it!
Awesome speed runs! Boyz II Men song had me laughing but fit perfectly! 😁
Yes, funny you caught that detail 😁
+1 sub love it when I get mine I want speeds like this may be lol
Yeah, as long as you add alot of power it will go to extreme speeds ;) You have any specific plans for what system you want to put in?
WTF , I really love it
The girlfriend was cold and cranky 🤣Sounds about right 😹🙀nothing like hearing "mamacita "from a computer voice. I subbing just on the comedy alone! Your Rc mods are icing on the cake. 👍
hehe, fun that you appreciated my jokes. Next time Ill get Kramer to read the voice over ;) Mamacita!
OMG! 😲
Haha WOW, thats amazing! Also I really enjoyed the video, very entertaining. The car looks like a small professional body builder/weight lifter with those big bicep mussels strapped to the sides.
Hehe, thank you! 😊 👍 Yeah, a body builder that have taken a little to much steriods 🙈
Hope your using a cap pack... If not, look into them. It might get you to the 120mph your looking for. It's called a capacitor pack. I didn't hear you mention it in the upgraded parts you mentioned. Awesome video...GOD BLESS
Hi! Both yes and no. There are Cap Packs integrated in the ESC, but I dont have any external one. I will consider adding external ones in a later stage maybe. Thanks for the tip :)
Most high end escs have them built in especially brushless escs ... that more of a add on for brushed escs and its ment more for constant punching out of corners on a track....this is basically drag racing.
Awesome 👍👍
Thank you :)
Mad car. Love the rear wing. I'm looking for something similar for my ftx vantage
Thanks! I used the maverick wing (MV22110), but im not sure how available that is atm. Might be very simular to the Hobao Hyper 7 Wing as well. Good luck 😊
Wow that was a great video my man. I love the wltoys line. I have 7 of them...lol 2x 144, 124019 - 16 -17 and 2x 104 love them all. My question is what size foam tires are you running in the video? Again awesome video. Keep it up, were watching.
Hi, thank you 😊
Its Drag racing tyres from Contact RC.
Rear: 45mm width with 70mm diameter (Item No. JD30RA)
Front: 32mm width with 70mm diameter (Item No. JD30FA)
WLToys e best 💪
How did you do the mod 1 conversion?
Nice vid. Crazy speed, best I got so far on my 124017 is just 103km so far.
Btw, what tyres are U using? My stock tyres shred too fast from ballooning
Hi, thank you 😊 I am using foam tyres for those speeds.
Its "Drag racing" tyres from Contact RC.
Rear: 45mm width with 70mm diameter (Item No. JD30RA)
Front: 32mm width with 70mm diameter (Item No. JD30FA)
@@LOLRC okies cool. Thanks for replying too. Stay safe 😆
Hi, very good job for car ...
Where do you buy front bumper carbon and spoiler.. thank
I used the maverick wing (MV22110) for the back wing, but im not sure how available that is atm. Might be very simular to the Hobao Hyper 7 Wing as well. For the front I used TRX-5446G Wing, Revo (Exo-Carbon finish) from traxxas.
Just google it and see if you have it available near you :)
thank you .. how did you adapt .. because the front bindings are not oriented in the same direction?? thank you
Awesome video bro🍻🍻🍻
Thank you :)
hello .. have you changed other parts ..... I played 30mn and the 2 differential out of order pinion transmission shaft in crumbs
In this video I had changed, the wheels, esc, radio and motor. But last run I broke the driveshaft. I have replaced them with a universal joint shaft, but havent tested them yet. Its winter here now 😕
@@LOLRC hi OK good and where did you buy the driveshaft. thank you
At those speeds I would want some kind of fpv system on it so I can see what it sees without worrying about getting out of sight.
Yeah 😁 but i might add some lights for visibility 👍
Awesome job m8! Keep it up
Thanks 🙌
right on man cool
Insane speed :) !!
Ty A ;)
Love it!
Love 😍
Question the spur is that an 8mm pinion? How did you manage to do mod 1?
Its 5mm mod1 pinion and I ordered the spur from Michael Koebbe on Facebook. Hit him up and he will help you. 👍
Awesome speed run🔥🔥🔥😂💯💯💯
Thanks 🤗
That's cool.
Thanks 😁
Great bro!! Insane speed. God job with car. I have one doubt, how can manage 6S that 2900kv motor when says
Thanks 👊 as long as you watch the temp, and dont overheat the motor, its not a problem. Take care😊
@@LOLRC wow! And the motor can hold 73k rpm? 6s = 25.2 V (4.2 per cell). 2900 x 25.2 = 73080... It seems to be so much rpm's, doesn't it?
@@raulmartinezmartin9240 A 6S battery pack has a nominal voltage of 22.2V. So You have 2900kv X 22,2 nom.volt =64380 rpm. It is in theory, havent measured what the motor actually can do :) And if you add 27t pinion, 32 spur, roll out 65.11mm, gear ratio 2.85, final drive ratio 3.38 and tire diameter of 70mm into the equation .. the calculated top speed is 251 km/h.. However you have to take aerodynamics, traction, ++ into it. This is just Theory. Alot harder to actually get in real life ;)
@@LOLRC 😅😅 I means 4.2V per cell full charged, but you right, so many more factors on equation. Thanks bro for your responses and very interesting videos!!
Awesome dude
Thanks 😍 U2. Great channel!
Top Bro / subscribed
What size motor do you use in the video?
SURPASS HOBBY KK 3665 Brushless Motor 2900KV 👍
High voltage doesn't necessarily mean faster....you want more amps and a lower turn motor. Say a 3.5 turn with stacked 120c 2s batteries.
Stock spur gear, just a modified pinion?
Not stock. Mod 1 spur 32t. Mod1 pinion 27t
amazing work dude, u deserve more subs,
will u also mention the songs used
Thanks for the nice comment 😀
(Music: Artist -"Song name")
Music background: L'Orchestra Cinématique - "F1 theme song cover"
Bass slapping: Dirty Loops - "Pink Power"
End of the Road song - Boys to men cover - "End of the road"
Cherfull riverdancish music: dont know the name. :/
Ending song: Chunnyt - "Getaway"
@@LOLRC thanks man
Wow,next
👌
What did you do with the stock spool
I replaced the stock spool with a mod1 spool :)
@@LOLRC car to share what spur gear size and combo? I just put one together stock spool cm36 castle 5700kv 31t pinion me about 65-70 on 3s
Looking to put a mamba monster 2 and a 3670 2500kv mod1 conversion no clue what gearing to start with
@@bevinsracing Sure! I am using a 32t spur gear and a 27t pinion gear (mod 1) With a 2900 kv motor. Wheel diameter is 67mm. And with 6S batteries (22. 2V) this car can do 240.71 km/h in theory 😊
Gyro bro 💪🏿😡👊🏿
Nopes
That's moving!
Yes, its not standing still 😉😜
@@LOLRC 😆
Title of song?
ruclips.net/video/MSrHoJHCa3I/видео.html
Ciao amico, bel video. Un'informazione se e possibile, mi sapresti dire se un'auto con motore brushless 3000 kv, posso usare 1 batteria S3 S4? Spero che mi rispondi. Hi friend, nice video. An information if it is possible, could you tell me if a car with 3000 kv brushless motor, can I use 1 S3 S4 battery? I hope you answer me.
Helo, as long as you keep an eye on your motor temperature, it should bo ok. I am running a 2900kv on 6s, but in theory its only rated for 3S.. But as I said, as long as it dont over heat, it should be ok. (disclaimer: on your own risk ;)
@@LOLRC grazie amico
I hope I can see a place like that to test mine.
Go on google maps and see if you can find any long stretches near by :)
How long diameter tire you use?
Hi,
Its Drag racing tyres from Contact RC.
Rear: 45mm width with 70mm diameter (Item No. JD30RA)
Front: 32mm width with 70mm diameter (Item No. JD30FA)
motor 3650 can use in this car?
Yes 👍
Where can i get the spur gear
here you can find some: islandhobbynut.com/search?options%5Bprefix%5D=last&q=pinions
Hello, what saiz tyre and brand,how to buy
Hi,
Its Drag racing tyres from Contact RC.
Rear: 45mm width with 70mm diameter (Item No. JD30RA)
Front: 32mm width with 70mm diameter (Item No. JD30FA)
@@LOLRC tq,nice design tyre,ok👌👌
Amazing.im from asia.whats Moto?surpasshobby?
Thanks! Yes SURPASS HOBBY KK 3665 Brushless Motor 2900KV.
How about battery?
@@yusyusuf3526 2 x 3S Spektrum 5000mah 100c. (6S)
Thanks.
Dude, you're lol. Subscribed.
Faaaaasssstttt!!!!
I'm debating doing a run on 4s with my 120a esc and you're over here doing 6s runs, Jesus Christ Mary and Joseph 🤣.
Hehe, can you please do an 8s?😅
That's a front wing, not a splitter
Yes
Top gear version rc
Lol, Maybe Low Gear RC ;)
Wtf who is talking? Some
Robot or Biden? Lame
Fail
It is a wtf-text-to-speech-robot. Thanks for the kind words!
@@LOLRC yea you need to fix that if you want more subscribers. Use your own voice not some robot.
@@landscape6285 Yeah, but im not that serious about it. Its just for fun, and the robot speaks better then me. Maybe some time in the future. Take care :)