Hey Matt! I don't want this to sound too weird but I had a picture of you on my desk at the fire department for years. Actually a pic of you, my son Matthew, and his team mate. It was on his first trip to the Olympic Training Center. You were always one of his idols and when they met you you were very nice to them. Thank you so much. I hope life is going well for you and yours.
Thanks! I want to cut a dovetail for a front peep sight. This breaks it down to a chunk of metal I can handle on my mini-mill. The cut went well....moved my front globe...shoots great.
Any word when ALL of the 457 models will be released? And what models will have 1/2 x 28 thread pattern instead of the 1/2 x 20 thread pattern? And one last question....will CZ have some place to order other barrels?
(I know this post is a year old, but I’m hoping someone sees my comment) Your comment about loosening the front magazine box screw is interesting. The barrel on my recently purchased 457 American was stuck, frozen, wouldn’t budge. CZ sent me a reply saying you "MUST" loosen the rear screw first, and then tighten it only after tightening the barrel set screws once you replace the barrel. I am not technically proficient on gunsmithing in the least, but how is it possible that this CZ gentleman and those in other videos do not even touch either one of those screws and their barrels slide right out?
@@RobertJones-yq6jk - I'm also late to the party...I heard this only affects the 455's, not the 457s. You loosen the rear mag screw 1-2 turns, undo the barrel set screws, exchange barrels, tighten barrel set screws, tighten rear mag screw - done. Hope that helps, cheers...
How decent of CZ to make a video to show us how to change barrels in the new 457 model. How about producing some barrel kits so that we can take advantage of this fine video production. Otherwise, it's useless.
I ordered one a week ago. Just got it las night. Heads-up. The instructions are a bit different than what you see here. Torque specs are different and they recommend a gunsmith for proper fitment and heads pacing. Ughhh....
@@DrDIII I just did this and as I was approaching upper 30's inch/lbs., I thought, this is BS! ... too much torque. Last time I trust a You tube video for torque specs! But I thought this was the manufacturer I was referencing..... grrr
@@chasehubbard5303 I'd roll with it. I don't remember if I did 30 or 35in/lb, but the new barrel shoots lights out. I bought the 24" .17hmr and I'm never going back to the.22
Do you know of any reason why one would have to loosen the magazine housing "rear screw" before loosening the the barrel. It is locked in the receiver and will not budge a hair unless that screw is loosened first. There is nothing in the manual stating that. No other video I’ve seen, including yours, requires that screw to be loosened first. Any thoughts?
Great video, thank you. Can the barrels be just as easily changed on the CZ 457 Varmint MTR Bolt Action Rifle please? Thanks for any help. looking to buy the CZ 457 Varmint MTR Bolt Action Rifle .
I bought the 22Lr CZ-457 separately and then bought the 17HMR and 22WMR later when they finally got them in stock. It states specifically in the owners manel to check the head space on each barrel because the bolt face and barrel aren't matched at the factory. There's a lot of internet chatter on how important this is. I used Go and No-go gauges because I am an attention to detail personality. If you go this route, make sure you remove the extractors so they don't interfere with the clearance space. Good luck.
Hey Matt...quick question...I hope you can help me figure out which version of the CZ 457 22LR can switch interchangeable barrel with 17HMR ? I see multiple versions of the 457 22LR available but unsure if any would be able to interchangeable barrel with 17HMR? I don't have access to a combo, so I need to pick the right version of 22LR 457 and buy the 17HMR barrel separately, just want to make sure I pick the right 457 LR version to build a combo. Thank you!
Will headspace be an issue with authentic CZ barrels when swapping between different calibers? There is information from various online sources that says headspace must be checked even with CZ barrels when going from one caliber to another. Any clarifications on this?
I just received my .17HMR barrel for mu 4567 pro varmint. The instructions state you need a gunsmith for proper initial fitting. I’m guessing head spacing is an issue. They also give different torque specs than what’s given in the video. Lame…
No, there are barrels for the 457 that come that short. If you can look, it's even threaded and everything. There are 457 models that come with 16-18 inch barrels like that.
Xlnt tutorial on barrel changing , a brand new series of rifles we may have some new owners , possibly show them and us experienced owners how you arrived at that stage . ( removing and reinstalling the action in the stock ) Anything new such as a 2 piece trigger guard ?
Hi, I am one of those who use CZ guns. I currently own both the CZ 512 22 WMR and 456 22LR. I would like to ask you if the dimensions of the barrel base (receiver side)of the CZ 457 and 512, both 22 LR and 22 WMR, have the same dimensions? Simply put, can the barrel of the 457 fit into the receiver of the 512? Thank you very much for answer.
I thought I read on Sportsman Warehouse in the description titles that they did. But you may want to double check for yourself. I may have the wrong model. Not sure.
Haha I call bullcrap. I took my factory barrel out and it did not just slide out like that, which is good, I want tight tolerances but putting the same barrel back in brought me here looking for instructions. It will not just slide right in like that
yes - the 22wmr shares the same mag as the 17hmr, and you'll have to remove the spacer in the mag well as described in this video if you actually have a 22lr setup - otherwise, same procedure
@@qcwallace Do you know if these barrels can be swapped in without requiring shimming? I've read mixed reviews/info that headspace must be checked and address appropriately even if the barrels are authentic CZ barrels.
@@xcoyco7301 i've read that too, but i don't feel competent enough to give you a real answer. A visit to a gunsmith to verify the headspace with gauges should not cost a lot tho, i'd rely on that
Hey Matt!
I don't want this to sound too weird but I had a picture of you on my desk at the fire department for years. Actually a pic of you, my son Matthew, and his team mate. It was on his first trip to the Olympic Training Center. You were always one of his idols and when they met you you were very nice to them. Thank you so much. I hope life is going well for you and yours.
Thank you! I applied 30 ppi to the 2 torque screws per the manual.
Thanks! I want to cut a dovetail for a front peep sight. This breaks it down to a chunk of metal I can handle on my mini-mill.
The cut went well....moved my front globe...shoots great.
Thanks. Good information. Blessings
Any word when ALL of the 457 models will be released? And what models will have 1/2 x 28 thread pattern instead of the 1/2 x 20 thread pattern? And one last question....will CZ have some place to order other barrels?
I found it helpful to also loosen the front magzine box screw to facilitate the barrel change
(I know this post is a year old, but I’m hoping someone sees my comment) Your comment about loosening the front magazine box screw is interesting. The barrel on my recently purchased 457 American was stuck, frozen, wouldn’t budge. CZ sent me a reply saying you "MUST" loosen the rear screw first, and then tighten it only after tightening the barrel set screws once you replace the barrel. I am not technically proficient on gunsmithing in the least, but how is it possible that this CZ gentleman and those in other videos do not even touch either one of those screws and their barrels slide right out?
Your the man i was getting crasy thanks ALOT !!
Berapa harga larasnya sampai di indonesia
@@RobertJones-yq6jk - I'm also late to the party...I heard this only affects the 455's, not the 457s. You loosen the rear mag screw 1-2 turns, undo the barrel set screws, exchange barrels, tighten barrel set screws, tighten rear mag screw - done. Hope that helps, cheers...
How decent of CZ to make a video to show us how to change barrels in the new 457 model. How about producing some barrel kits so that we can take advantage of this fine video production. Otherwise, it's useless.
Order from their site directly, most are showing in stock
I ordered one a week ago. Just got it las night. Heads-up. The instructions are a bit different than what you see here. Torque specs are different and they recommend a gunsmith for proper fitment and heads pacing. Ughhh....
@@DrDIII I just did this and as I was approaching upper 30's inch/lbs., I thought, this is BS! ... too much torque. Last time I trust a You tube video for torque specs! But I thought this was the manufacturer I was referencing..... grrr
@@chasehubbard5303 I'd roll with it. I don't remember if I did 30 or 35in/lb, but the new barrel shoots lights out. I bought the 24" .17hmr and I'm never going back to the.22
@@rustinthewheelorder from WHAT website? CZUSA says they won’t sell directly to consumers.
are all barrels interchangeable?
The video guy says the barrel screws are Allens. My 457 uses T-15 Torx/lobed screws, which is a good thing! Allen heads strip much too easily.
My new 457 is 3mm as stated. Torque specs are not
Do you know of any reason why one would have to loosen the magazine housing "rear screw" before loosening the the barrel. It is locked in the receiver and will not budge a hair unless that screw is loosened first. There is nothing in the manual stating that. No other video I’ve seen, including yours, requires that screw to be loosened first. Any thoughts?
I have a cz 455 American. I want to know if I could just get the 457 barrel and put it on my 455 American. Will it fit?
Muchas gracias señor 🫡💪🏻
Great video, thank you. Can the barrels be just as easily changed on the CZ 457 Varmint MTR Bolt Action Rifle please? Thanks for any help. looking to buy the CZ 457 Varmint MTR Bolt Action Rifle
.
When are 457 barrels coming out. I know the 455 barrel fits but they say they wont match the receiver
I bought the 22Lr CZ-457 separately and then bought the 17HMR and 22WMR later when they finally got them in stock. It states specifically in the owners manel to check the head space on each barrel because the bolt face and barrel aren't matched at the factory. There's a lot of internet chatter on how important this is. I used Go and No-go gauges because I am an attention to detail personality. If you go this route, make sure you remove the extractors so they don't interfere with the clearance space. Good luck.
@@randmayfield5695 any preference between the 17hmr and 22wmr on the 457?
@FerventReminder Cost of each with respect to ammo. Of course the ballistics are very different but I only target practice and don't hunt anymore.
Hey Matt...quick question...I hope you can help me figure out which version of the CZ 457 22LR can switch interchangeable barrel with 17HMR ? I see multiple versions of the 457 22LR available but unsure if any would be able to interchangeable barrel with 17HMR? I don't have access to a combo, so I need to pick the right version of 22LR 457 and buy the 17HMR barrel separately, just want to make sure I pick the right 457 LR version to build a combo. Thank you!
Hi there, it is really simple. If it is CZ 457, it is capable of barrel switch for 17 HMR and 22 WMR. The older models like CZ 455 are not.
@0:02:08 I want to change my 17 hmr varmint barrel to the 22 LR varmint barrel.
Where can I buy the "spacer" to put the 22 LR magazine ?
Will headspace be an issue with authentic CZ barrels when swapping between different calibers? There is information from various online sources that says headspace must be checked even with CZ barrels when going from one caliber to another. Any clarifications on this?
I just received my .17HMR barrel for mu 4567 pro varmint. The instructions state you need a gunsmith for proper initial fitting. I’m guessing head spacing is an issue. They also give different torque specs than what’s given in the video. Lame…
@@DrDIII Lame is right. I just needed to complain one more time so I can move on lol
Lamento que esta excelente fábrica de armas nao pode se instalar no Brasil.
Can you put a Varmit profile barrel into a CZ 457 Royal rifle stock? Will it fit?
Royal stock is made for thin profile of barrel. You need to shave off some material to fit thick one in.
Please advise how to clean the bolt.
I have problems changing barrels. The 22 lr won't click in its place and the 17hmr was pretty hard to remove. Any tips to get the barrel in place?
Does this work exactly the same for the 455 also?
I bought a 452 carbine and it seemed to me excellent, the only thing that the butt in the part where the gun goes is horrible, very bad ...
Can you swop calibres and barrels with all the 457 models, also with the synthetic version?
no. The basic 457 american can’t fit other barrels. The other high end variant can though.
Merci
Where may I fine CZ 457 20in 22lr barrels??
Any word on stainless models coming out??
Do you recommend shims.?
How much price
Thanks for the instructions. The .17 HMR barrel looks significantly shorter than the .22 LR barrel. Was the .17 HMR barrel modified?
No, there are barrels for the 457 that come that short. If you can look, it's even threaded and everything. There are 457 models that come with 16-18 inch barrels like that.
@@Dr._Nope Than you for the information.
it is possible to change a 22lr to 22wmr?
yes😊
If you buy a new barrel to convert it into a different caliber does it include the appropriate magazine?
Yes
Xlnt tutorial on barrel changing , a brand new series of rifles we may have some new owners , possibly show them and us experienced owners how you arrived at that stage . ( removing and reinstalling the action in the stock ) Anything new such as a 2 piece trigger guard ?
This is AWESOME
Cz457 bolt disassembly, please.
I would like to know how to swap cz527 barrel 223, thank you
Hi, I am one of those who use CZ guns. I currently own both the CZ 512 22 WMR and 456 22LR. I would like to ask you if the dimensions of the barrel base (receiver side)of the CZ 457 and 512, both 22 LR and 22 WMR, have the same dimensions? Simply put, can the barrel of the 457 fit into the receiver of the 512? Thank you very much for answer.
I thought I read on Sportsman Warehouse in the description titles that they did. But you may want to double check for yourself. I may have the wrong model. Not sure.
Are the CZ455 & CZ457 barrels interchangeable with each other?
Yes they are.
What's the torc wrench your using thanks
Think they call them Phat wrench. Forget who makes it. Mine is same but digital version.
Where do you order the interchangeable barrels from? I have the 457 Lux .22lr but want to get the .17hmr
Check the dealer locator on their website.
too bad the replacement barrels are impossible to find... always out of stock.
try gunbroker - lots of them
Haha I call bullcrap. I took my factory barrel out and it did not just slide out like that, which is good, I want tight tolerances but putting the same barrel back in brought me here looking for instructions. It will not just slide right in like that
Снимите видео как разбирается затвор на CZ 457
у Альянс-Медиа(они дилёры cz) есть такое видео на RUclips
When and where can I get a 457 17hmr lux barrel set? Sure love to have one. Thank you
Check the CZ-USA Webstore.
Cheers Mate!
Can you swap a barrel in the jaguar
Yes
The CZ457 magazin is it same, like the CZ455 magazin?
Yes. Its the same.
@@CZfirearmsOfficial The metal magazin is compatible for the CZ455?
CZ firearms are the 455 barrels compatible with the 457 rifles?
Can the 17hmr or 22lr swap with the 22wmr?
yes - the 22wmr shares the same mag as the 17hmr, and you'll have to remove the spacer in the mag well as described in this video if you actually have a 22lr setup - otherwise, same procedure
Thanks...I got the 22lr, I want to buy the wmr to swap with.
@@xeethao I hope you can find the replacement barrel easily! Where i live, they are very hard to find...!
@@qcwallace Do you know if these barrels can be swapped in without requiring shimming? I've read mixed reviews/info that headspace must be checked and address appropriately even if the barrels are authentic CZ barrels.
@@xcoyco7301 i've read that too, but i don't feel competent enough to give you a real answer. A visit to a gunsmith to verify the headspace with gauges should not cost a lot tho, i'd rely on that
Cool
Will you be able to go from 22lr to 22 mag as well?
Yes
I have a 455 lux .22 WMR , If I buy the Varmint Barrel in .22WMR will it fit in the Lux stock or will I need to buy the Varmint stock?
You'll need a new stock
You could have the barrel channel enlarged to accept the larger barrel, but it will have a gap around the american barrel
😁😁😁😁😁
Tha nk
Во я не хрена не понял.Пишите на понятном всем Русском языке,не мучаетесь и не ломайте язык.
Call Putin ask him to translate it for you
I'm sorry but I will take Sako Quad any day over this