Most Destroyed Losi Promoto Yet? Full GPM Rebuild!
HTML-код
- Опубликовано: 5 сен 2024
- Bike has taken a few spills but I messed it up pretty bad two weeks ago. The crash in the video only bent the wheel a bit. Its done it a dozen or more times as the first 3 packs were 90% of my friends playing with it. Then I go off by myself (no video) and hold such a long and sweet wheelie that I wanted to make it to the end. Wind had a different plan and blew the bike at near full speed as it planted its front wheel into some wood steps. It broke the steps. LOL Just a video showing whats involved with install and what the parts look like!
First few bumps, slight bend to wheel. Then there was that one... the one that did it in! I thought at first I just broke the triple trees and front wheel. I was very wrong. Bent the rotor, broke a brake pad (have to order ENTIRE caliper :( ), bent front axle, snapped rear shock, broke servo saver, bent lower "bash plate" bar, had to replace the upper frame. Decided to just GPM green it out!
And I want to thank the people that drove me to do it. 6 months ago I had a single RC car. Seeing Kevin Talbots happiness as he bashes (would seriously love to have a hang with that guy, his joy has to be infectious) , seeing how technical and helpful Earl is with the Losi bikes, Exocaged for making me spend WAY too much with Vitavon (but I am still ordering more), Raz because Perfect Pass stuff is soooo nice and hes very entertaining and Mark because hes another Texas boy!
#kevintalbot #earlmoorhead #GPM #Exocaged #Raz #MarkSantaMaria
Lol,literally just did my red one with all gpm.the hubs they didn't send me,and ended up getting a refund for them,but ordered them from a main instead. I'll have them on thursday.spent 480 bucks on that stuff!! Cost less to do my real dirtbike!
Right? I could buy a Dirt Industries stickers kit, new plastics, R&D head, Pro Circuit pipe, and suspension work done on my GasGas 300 2-stroke for the amount of money I spent on Treal & Vitavon upgrades for my Pro Moto. Wish I had gone GPM. Treal & Vitavon is freaking expensive!
I just put a bunch of Treal parts on mine. Wish I would have gone with GPM, the Treal parts are expensive. I have the green bike too. I have the black plastics and all black rider. It's all murdered out. You did just fine making the video. I enjoyed watching it. Subscribed.
Kevin Talbot is the RC Goat! Earl is the Promoto Goat!
Looks awesome but you should of done the swing to ? You did everything else and have a stock swing arm . Get a green swing arm so it looks done plus easier to tighten the chain
GREAT BUILD! I love the green bike, but went with mostly silver aluminum upgrades for different color plastics. Ice job on the video…VERY detailed info👍🏻
I just bought a Arrma 4S recently but I am going to have to get one of these pretty soon 😊 I wish they had more graphic kits and pro riders.
Seems every week a new graphics kit comes out. I bet its only a matter of time until we see different riders. Heck, I just ordered an off road size set of on road tires and wheels for it. My blue one has a hoodie and all! LOL
Very good camera view and very well detailed.. even talbot is not as PRECISE as you.. I LOVE IT! IF YOU KEEP GOING YOU WILL BECOME MY TOP 5 OF THE BEST OF ANY KIND RC.. EVEN IF You don't have 1000 Rc models NOT SERIOUS know the quality which counts not the quantity
Great stuff. I like all the green. That was a hard hit. I've had mine pull a few wheelies and scrape the rear fender and tumble once over end. I run it in the grass and then the street. Other than that is is ok. Yours was terribly hit. I may do some upgrades too. I have the blue one.
They do take a beating! It was 100% my fault. I too have a blue one! I turned it into a street version with a hoodie on the rider and all. Tried to get some lights but Polo creations never sent them. I did just order some wheels and the new Vitavon tires that res street compound but as large around as the off road tires. Since that bike has speed gears it should do 50+ now!
I wanna see it ride after upgrades.
Hi there hope all is well bummer to cause damage you did,but looks great now all in green,seen above poster say cost alot get the stuff he did,and aure yours cost a bit also.
These bikes look so good so will be getting one shortly ,just bought 3 new rc cars in last few weeks (2 cheap and one i would call mid range ) so will leave 2-4 weeks or so before ordeeing this bike so mrs doesnt moan to much ha ha.
But me and my 6 year old will have lots of fun when get it (lets hope less damage as possible ha ha )
Good luck and thanks for informative video,much appreciated indeed
As soon as you mention that con man kt from the UK i stopped watching.
Really? You dont like Kev? Hes a lot of fun!. I never met him but I am entertained by his videos. Sorry you have a different experience. Cant please everyone I suppose.
A con man? He is literally the only RUclipsr who buys products with his own money to review and shows you how it is. You can't call someone a con man with no proof? How did he con you? Please enlighten us? Did he hurt your feelings when he called your favorite RC car junk? Kev has been nothing but a good dude. Every other reviewer accepts free stuff and signs contracts to say it's good even if it's sh*I. I bet you have nothing to back up your con story other than your silly feelings. 100% he never conned you, he doesn't even know you. Do you even know what the definition of a con man is? This guy didn't want your view anyway. So I'll give him my view.
feel free to do your own research my Dad works for the IRS that's how i know.. 👍 @@FarmerFpv
These the dude have just the perfect rc’s 🥲
Thank you. I do have an addiction! LOL