Quick Note: The chainsword does move in the accurate direction. The framerate creates a visual illusion making the blades appear to be moving in the wrong direction.
Honestly that's a pretty common optical illusion when it comes to fast moving things like that, regardless of framerate. Have you ever looked at a ceiling fan that was spinning rapidly and if you focused on it one way it was rotating the correct direction, yet the second you focused differently it seemed to go the opposite direction?
@@blackc1479 Transcribed off the seal at 00:02: Litany of the True Form O Spirit of the Machine, blessed is they forge, sacred are thy gears. I beseech thee, Omnissiah, grant unto this engine the purity of filament and the perfection of form. Let no chaos of misalignment plague its sacred mechanisms, nor foul heresy corrupt its G-code. Let the extrusion be smooth, the adhesion strong and the first layer flawless. For the true pattern lies in they divine schema, and all creation bends to your will. Through rites of calibration and prayers of maintenance, may this device bring forth wonders untold and shapes unseen, for the glory of the Imperium In the name of Mars, the Omnissiah and the eternal forge, let no failure stand. Let no warping persist. May the Machine Spirit within this device roar to life and its prints stand as testaments to faith and precision. Praise the Omnissiah. The form is Sacred. The print is Blessed.
I made some purity seals for a friend a few years back. I bought some iron-on transfer paper and printed the design, then transferred it to some old white cloth shirts. After cutting the shape out, I weathered the seal with some coffee and a toothbrush splatter of thinned red paint to give them a well-worn look.
Haven't even watched the vid yet and clicked 👍 immediately at the gate. I think about this almost 2X a week...for the past 20yrs. All I got was eye rolls and head shakes when I brought it up and said that one day...someone is going to do it...and if not I will take a crack at it once I retire. The Emperor Protects.
Hey guys! Just a small rant after watching a lot of the videos here and being inspired to do my own Mando helmet(not this video specific but this is the newest one) If youre using the acetone wash with the Bondo.....make sure you dont use a normal kitchen plastic cup the acetone might eat through it and make a whole mess Also when doing your prep and cleanup don't be afraid of doing a lot of filler primer then spot filling, both of them are super easy to sand and if you build up alot of layers you can most of the time get out some really deep imperfections! Finally I HIGHLY recommend getting a small Dremel, I had to do some gluing for my project and the Dremel was really good at cleaning up some of the leaking super glue! Thanks for coming to my TED Talk, thank you GA for inspiring me to take on my project! I'm learning a lot doing it on my own! You guys rock!
Please guys yall need to tag GW and Amazon, also Henry Cavill. That is beautiful they could use them in his up and coming series. I really do hope GW reaches out to you guys. Maybe yall will be able to help create some of helmets and armor. I can see the guy that play Reacher using this lol he would make a perfect Space Marine
Ive always wanted someone like you guys to make a chainsword. Ive been hoping to see a motor from an actual chain saw used, for the whirr. Or maybe the motor from a mini gun that can spin up to super speed. everything is amazing about this make, except the speed of the teeth.
Hey! Great work. Just got into 40k myself, black templars! I've been following your work for a long time now, and I just submitted an application to your company. There weren't a lot of options on glassdoor to submit any extra stuff, but I would be honored to worry with you in any capacity. Looking forward to more videos!
This is my first video i’ve watched by you guys, and I have to say two things.. 1: you guys did really well. 2: I love Jamie’s mix between a standard American accent, Scottish Accent, and Australian accent
This is perfect timing since my replacement printer just showed up, and I was thinking of doing a set of space marine armour so I shall eagerly await that.
Im aware that this comment is a bit late so it probably won't be read by you guys but I'm making a cosplay of the uf-16 inspector armour from hd2, problem is that no one has the actual armour files, you guys have the helmet but not the arm guards and the pauldron, if you have the time it'd be amazing if you could release the rest of the armour set. Thanks, I love your videos, it's how I got into cosplay
In your guys hands it just look like a stubby grip eviscerator chainword but I do love the purity seal text. Blessed be thine machine for it is blessed by the Machine God and its machine spirit brutal yet magnificent.
Alex Geek Workshop has been making these for a little while. He's got a couple different models of chainsword, and a chain axe. 3D printable, and all go vroom.
This is amazing! I've been thinking about jumping into the specialist tier as I just got my first 3d printer a few months ago, but I have a question. Are the files cut up for smaller printers?
Yellow hazard stripes would have worked as well. There is one slight critique... the chain is rotating in the wrong direction. The exposed part of the chain should travel - Tip to Handle, you have it going Handle to Tip. Overall it is a great build
As I am not currently nearly 8’ tall (Geneseed is _still_ back ordered!) I was wondering if the chainsword was scalable to something more Imperial Guard sized? I know it wouldn’t be printable but replacing the resin pommel with one made of cast iron or brass would really improve the balance. I’m willing to bet that a brass skull in near the exact size should be pretty easy to find online. Oh yeah… Subscribed. Y’all had me as soon as RUclips’s algorithm decided that with being subscribed to 30+ Warhammer related channels “chainsword” might be of interest. Easy decision since I’ve been playing 40K since Rogue Trader first arrived here in the States.
I love all of your work!!! I’ve continuously bought your files previously and loved every bit of all of them on Cults3D and Etsy!!! Will you guys be continuing working on the Saw Shield from Doom Dark Ages???
The problem most people tend to ignore is the fact that chainsword teeth are designed for cutting rather than grinding, where the effects on metal would be akin to a bandsaw in action, that being said not only are the teeth incredibly sharp and incredibly durable, but due to the nature of the chainsword, when it hits a target, the teeth are never going to be completely aligned with each other, due to the oscillating nature of the belt system and teeth, meaning that any and all cuts from such a weapon would never be 100% clean unlike a regular blade cut, meaning that as stated earlier, one tooth might be perfectly straight, the next tooth might be tilted slightly to the left whilst the other tooth is tilted more to the right and so on, thus making even anything from a glancing blow incredibly destructive, and whilst in more modern uses such a weapon is incredibly useless due to the lack of hand to hand combat and both a regular sword or even knife would be sufficient enough to kill another human, that being said when dealing with more tougher and much larger and stronger opponents say a rhinoceros or an elephant or in sci fi settings a termanid or Zerg would be ideally better suited for a chainsword, due to the lack of actual strength required to produce similar results with just a regular sword, not to mention that chainswords are actually pretty cheap, in 40K terms where if a blade were to ever get damaged or bent, then the whole blade has to be replaced or the whole sword would have to be thrown away, compared to say the resources and cost in making a power sword which can basically cut through just about anything due to its ability to disrupt whatever it’s cutting into at a molecular structure, thus allowing for a regular person to even cut through space marine power armor, unlike lightsabers that use plasma and immense amounts of energy to cut through a target as seen in the phantom menace where quigon is cutting his way through a ships blast doors, a power sword would’ve simply cut into pieces like most scenes in anime where a skinny highschool girl is able to cut a tank into pieces 😂
Can you make Nero’s Red Queen now? That seems like a good challenge. I once tried to do it with a friend and it was…not great. We tried to mount a little twostroke onto a sword but it made too much vibration and just broke apart and messed up the blade. Maybe an electric motor would fare better?
You need to do the sword some justice and show it off more please. So much work and effort into the details and functionality and I didn't see enough of the finished product in working action😢
while it look super awesome it does look quite big for us normal humies to wield, like i know its meant for space marines and such but normal humans use chainswords too only they are smaller and better to wield. it probably would be smarter and better to make a smaller chainsword intended for normal, imperial guard humans to use. you can`t really swing a space marine size chainsword around without tipping over due to the weight and length of the sword. so making an smaller version would probably be better, but hey done is done and it looks great how it came out and the purity seal actually having readable text is such cool thing to add, all that remains is to pray to the machine spirit within the sword and have incense burn while you`re at it. hoping for more 40k related builds and some builds used by the smaller normal kind of human that play a huge part of the 40k setting, like lasguns or even plasma/melta gun! great build guys and i await to see what you create next. and remember, the emperor protects.
To echo some other comments I saw, can you guys work on your sound mixing? I found that i had to keep turning the volume up to hear you speak and then down for the music
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Quick Note: The chainsword does move in the accurate direction. The framerate creates a visual illusion making the blades appear to be moving in the wrong direction.
Just like wheels appearing to be running backwards at certain speeds.
I was going to say, that looked a little wrong there on the reveal.
I was really hoping to see a hype reek of the finished sword. We want to see it working and take in the paint job!
@@KurtKn1sp3l😂I was just.
Honestly that's a pretty common optical illusion when it comes to fast moving things like that, regardless of framerate. Have you ever looked at a ceiling fan that was spinning rapidly and if you focused on it one way it was rotating the correct direction, yet the second you focused differently it seemed to go the opposite direction?
We need that purity seal on all our 3D printers.
It's pretty much an STC you'll need alot of seals.
Lol
I'm in.
Preferably for 3 or 4.
I have an ender3 so all the help, etc😂
GA, can we all have the full text? Pleeeeeeeze?
@@blackc1479 Transcribed off the seal at 00:02:
Litany of the True Form
O Spirit of the Machine, blessed is
they forge, sacred are thy gears. I
beseech thee, Omnissiah, grant
unto this engine the purity of
filament and the perfection of
form. Let no chaos of misalignment
plague its sacred mechanisms, nor
foul heresy corrupt its G-code. Let
the extrusion be smooth, the
adhesion strong and the first layer
flawless. For the true pattern lies
in they divine schema, and all
creation bends to your will.
Through rites of calibration and
prayers of maintenance, may this
device bring forth wonders untold
and shapes unseen, for the glory of
the Imperium
In the name of Mars, the
Omnissiah and the eternal forge,
let no failure stand. Let no warping
persist. May the Machine Spirit
within this device roar to life and
its prints stand as testaments to
faith and precision.
Praise the Omnissiah. The form is
Sacred. The print is Blessed.
He's a real life tech priest
Next they should work on those toasters.
I made some purity seals for a friend a few years back. I bought some iron-on transfer paper and printed the design, then transferred it to some old white cloth shirts. After cutting the shape out, I weathered the seal with some coffee and a toothbrush splatter of thinned red paint to give them a well-worn look.
That's awesome 👌
1:48 You misspelled "Techpriest Archmagos" as "Mad Scientist"
8
Ron is a great addition to the team and I'm loving the production value of the video. excellent job guys
I'd love to see you guys electroplating something so that it's covered in real metal. Like maybe a gold plated servo skull?
NANOVATE :D
The Algorithm has blessed you brothers, keep up the good work
Brothers! This is the way!
This is the way.
This is the Way
4:25 oh god… his face melted for sec.
Premiere Pro moment
"Do not wet sand when the water is warm. Sand with enough intensity to warm the water." - William Butler Yeats
“Do not wet snow when the water is cold. Snow with enough intensity to cool the water”
-a dude
Will go good with full size astartes armor
C2E2 bouta be wild
I'm busy trying to get my Etsy shop set up making all the product photos you guys got to stop giving me side projects I want to do
S tier side quest tho😅
this is the first of your videos i have seen , im exited for what other things you made !
Haven't even watched the vid yet and clicked 👍 immediately at the gate. I think about this almost 2X a week...for the past 20yrs.
All I got was eye rolls and head shakes when I brought it up and said that one day...someone is going to do it...and if not I will take a crack at it once I retire.
The Emperor Protects.
+10 points for doing the emperor's work.
-5 for not having gothic music underscoring this video for the 40k theme.
17:53
Hey guys!
Just a small rant after watching a lot of the videos here and being inspired to do my own Mando helmet(not this video specific but this is the newest one)
If youre using the acetone wash with the Bondo.....make sure you dont use a normal kitchen plastic cup the acetone might eat through it and make a whole mess
Also when doing your prep and cleanup don't be afraid of doing a lot of filler primer then spot filling, both of them are super easy to sand and if you build up alot of layers you can most of the time get out some really deep imperfections!
Finally I HIGHLY recommend getting a small Dremel, I had to do some gluing for my project and the Dremel was really good at cleaning up some of the leaking super glue!
Thanks for coming to my TED Talk, thank you GA for inspiring me to take on my project! I'm learning a lot doing it on my own! You guys rock!
Please guys yall need to tag GW and Amazon, also Henry Cavill. That is beautiful they could use them in his up and coming series. I really do hope GW reaches out to you guys. Maybe yall will be able to help create some of helmets and armor. I can see the guy that play Reacher using this lol he would make a perfect Space Marine
A gift from the Forge!
Now please make a khorne axe version. I would print one so fast.
Please mix the montage music quieter, its murder for headphone users to have it blasting twice as loud as everything else.
Agreed
Good job Techpriests! Now let's rip the Mutant, the Heretics, and Aliens with this🗣️⚔️
By the Emperor, now make a two-hander
Dorn approve
Yes, we need Eviscerators for our noble Sisters of Battle. And ourselves, of course!
Ive always wanted someone like you guys to make a chainsword. Ive been hoping to see a motor from an actual chain saw used, for the whirr. Or maybe the motor from a mini gun that can spin up to super speed. everything is amazing about this make, except the speed of the teeth.
We're not going to make an actual weapon. This is meant to be used for cosplay.
Hey! Great work. Just got into 40k myself, black templars! I've been following your work for a long time now, and I just submitted an application to your company. There weren't a lot of options on glassdoor to submit any extra stuff, but I would be honored to worry with you in any capacity. Looking forward to more videos!
Not only Space Marines, imagine all the comissar, guardsmen and Lord Castellan Creed cosplays
The purity seal is so spot on ahahahahahah
This is my first video i’ve watched by you guys, and I have to say two things.. 1: you guys did really well. 2: I love Jamie’s mix between a standard American accent, Scottish Accent, and Australian accent
Saw this on Reddit, really cool work.
Where does one find that purity seal, my old 3D printers crave the omnissiah’s blessing
Releasing soon!
18:26 By the Emperor! It's so sharp it ripped right through the bitrate!
files already downloaded, gonna see how good I really am at this....
Are the files already uploaded? I can't find them on the Patreon
The rotary compact internal combustion engine that Liquid Piston makes can fit into such a sword.
15:48 When the intrusive thoughts win 😂
Most builders trying to recreate artefacts from 40k forget to ask for the blessings of the machjne spirit. The Emperor Approves.
This is perfect timing since my replacement printer just showed up, and I was thinking of doing a set of space marine armour so I shall eagerly await that.
i bet you guys used "auto cadian" for this project^^
@@RayS013 underrated comment
The forge broke before the guard did
Finest armament from the Forge!
Im aware that this comment is a bit late so it probably won't be read by you guys but I'm making a cosplay of the uf-16 inspector armour from hd2, problem is that no one has the actual armour files, you guys have the helmet but not the arm guards and the pauldron, if you have the time it'd be amazing if you could release the rest of the armour set. Thanks, I love your videos, it's how I got into cosplay
11:11 "i think the emperor provides" 😂 indeed he does
For the emperor! awesome work brothers
Hell yeah that's absolutely badass.
That Ron guy is super likeable. Low-key and doesn't use the typical youtuber-voice and facial exaggeration. Also clearly talented.
The Warp affects the video at 18:27, right when we want to see his reaction...send in the Grey Knights to fix this at once.
Beautiful work
Galactic Armor in 2050:
Today, we're building a Dreadnought.
Don't temp us...
@GalacticArmory A Dreadnought can be thousands of years old. For a human to be alive for that long is a revolutionary feat of technology and medicine.
Brother! Bring me the fabric scissors. The HEAVY fabric scissors!
In your guys hands it just look like a stubby grip eviscerator chainword but I do love the purity seal text. Blessed be thine machine for it is blessed by the Machine God and its machine spirit brutal yet magnificent.
Amazing chainsword! I want one too! Anyway can we get the full text of the purity seal? is too much funny ahahah
awesome work.
I do think you missed a opportunity for some 90's era GW hazard striping on it though. 😂
Alex Geek Workshop has been making these for a little while. He's got a couple different models of chainsword, and a chain axe. 3D printable, and all go vroom.
Great work
You guys are doing awesome content in sure your friends and family are proud 🙏
Thanks for the kind words!
This is my first video and I’m in love. May the emperor’s light guide you.
The concept of putting a sharp chain on a bar has been around for a long time
nice subbed for building actual chain sword 👍😆
these need to spread. We need people at every con yelling FOR THE EMPEROR! while chasing everyone with chainswords.
Space Ki...I mean, Emperor be praised! 🙏🏻
The Omnissiah approves of this build.
"Welcome,brother. I'm from Ordo Hereticus and we need to talk about that Purity Seal. Yes. Now."
I knew this day would come!!!
LOL Ron basically a Tech Priest..
They need to 3d print him a tech priest outfit for these vids 😂
Echt Cool! Wie wäre es mit einem Sound Modul für das Motorengeräusch?
This is amazing! I've been thinking about jumping into the specialist tier as I just got my first 3d printer a few months ago, but I have a question. Are the files cut up for smaller printers?
Yup. We printed these all the parts on X1Cs, so they're ready for small printers.
@Stab_GalacticArmory Thanks for the reply! Sounds like it's time to sign up!
But I wanna build one NOW 😭😭😭
Great work!
He is just doing ehat they do with chainsaes same badic principles very cool ❤
Bravo! Super epic results!!!
15:42 “Not too bad.” Is crazy to say while holding a functioning chain sword. Clearly a future relic that the Emperor has provided!! Amazing work
Yellow hazard stripes would have worked as well.
There is one slight critique... the chain is rotating in the wrong direction. The exposed part of the chain should travel - Tip to Handle, you have it going Handle to Tip.
Overall it is a great build
It’s the video frame rate like how wheels spin backwards at high speed
yeah, it's just a rolling shutter effect. The teeth move tip to hilt.
its so funny that the chisels on her would cores so much kick back its unreal, one day they will add ramped depth gages lol yes i am a forester
........and a Chainaxe too? 😜
Now that we've got the technology it won't be too hard!
@@GalacticArmory Khorne will be pleased.
Only thing would made this 💯 if you added an audio device for the final aesthetic aspect 😅 overall amazing work and great vid
I'm only sort of joking when I say this but I'm surprised GW hasn't tried suing you into oblivion for making these
As I am not currently nearly 8’ tall (Geneseed is _still_ back ordered!) I was wondering if the chainsword was scalable to something more Imperial Guard sized?
I know it wouldn’t be printable but replacing the resin pommel with one made of cast iron or brass would really improve the balance. I’m willing to bet that a brass skull in near the exact size should be pretty easy to find online.
Oh yeah… Subscribed. Y’all had me as soon as RUclips’s algorithm decided that with being subscribed to 30+ Warhammer related channels “chainsword” might be of interest. Easy decision since I’ve been playing 40K since Rogue Trader first arrived here in the States.
Love this…To serve the Emperor's Will!
OMG, it looks awesome. The real chainsword!
I love all of your work!!! I’ve continuously bought your files previously and loved every bit of all of them on Cults3D and Etsy!!! Will you guys be continuing working on the Saw Shield from Doom Dark Ages???
Yes! We're still working on that project!
@ I can’t wait!!!
I love the design of chaos chainsword
It's very... Phallic.
Nuuuuuts I need one! And may I add a relic bolter to the wishlist?
Every man’s dream
Scaled perfectly for a guardsman sgt ;) lol
Man, I love the absolutely bonkers shit y'all do.
Would that Purity seal not be a sign off from your Tech Priest for its last service?
The problem most people tend to ignore is the fact that chainsword teeth are designed for cutting rather than grinding, where the effects on metal would be akin to a bandsaw in action, that being said not only are the teeth incredibly sharp and incredibly durable, but due to the nature of the chainsword, when it hits a target, the teeth are never going to be completely aligned with each other, due to the oscillating nature of the belt system and teeth, meaning that any and all cuts from such a weapon would never be 100% clean unlike a regular blade cut, meaning that as stated earlier, one tooth might be perfectly straight, the next tooth might be tilted slightly to the left whilst the other tooth is tilted more to the right and so on, thus making even anything from a glancing blow incredibly destructive, and whilst in more modern uses such a weapon is incredibly useless due to the lack of hand to hand combat and both a regular sword or even knife would be sufficient enough to kill another human, that being said when dealing with more tougher and much larger and stronger opponents say a rhinoceros or an elephant or in sci fi settings a termanid or Zerg would be ideally better suited for a chainsword, due to the lack of actual strength required to produce similar results with just a regular sword, not to mention that chainswords are actually pretty cheap, in 40K terms where if a blade were to ever get damaged or bent, then the whole blade has to be replaced or the whole sword would have to be thrown away, compared to say the resources and cost in making a power sword which can basically cut through just about anything due to its ability to disrupt whatever it’s cutting into at a molecular structure, thus allowing for a regular person to even cut through space marine power armor, unlike lightsabers that use plasma and immense amounts of energy to cut through a target as seen in the phantom menace where quigon is cutting his way through a ships blast doors, a power sword would’ve simply cut into pieces like most scenes in anime where a skinny highschool girl is able to cut a tank into pieces 😂
I must say, dodging Tyranids by saying BOTH big bug species inspired by them got me lol
we use chain oil to help the chain move, is it low speed stopping it heating up in the guide bar ?
Can you make Nero’s Red Queen now? That seems like a good challenge.
I once tried to do it with a friend and it was…not great. We tried to mount a little twostroke onto a sword but it made too much vibration and just broke apart and messed up the blade. Maybe an electric motor would fare better?
Will buy immediately let me know !
I need that purity seal for my printer!
You need to do the sword some justice and show it off more please. So much work and effort into the details and functionality and I didn't see enough of the finished product in working action😢
Needs an awesome sound card also.
Now imagine a 9-foot behemoth in power Armour chasing after you with this sword
We're making a full size space marine in the near future.
while it look super awesome it does look quite big for us normal humies to wield, like i know its meant for space marines and such but normal humans use chainswords too only they are smaller and better to wield. it probably would be smarter and better to make a smaller chainsword intended for normal, imperial guard humans to use. you can`t really swing a space marine size chainsword around without tipping over due to the weight and length of the sword. so making an smaller version would probably be better, but hey done is done and it looks great how it came out and the purity seal actually having readable text is such cool thing to add, all that remains is to pray to the machine spirit within the sword and have incense burn while you`re at it.
hoping for more 40k related builds and some builds used by the smaller normal kind of human that play a huge part of the 40k setting, like lasguns or even plasma/melta gun!
great build guys and i await to see what you create next. and remember, the emperor protects.
SoB Penitents can use Eviscerators without power armor. git gud.
Goddamnit I wish I had a 3d printer
No one : Oh that's cool !!!!
Us Army : We need this.
I think it's the other way around. *Everyone* thinks this is cool, not no one.
To echo some other comments I saw, can you guys work on your sound mixing? I found that i had to keep turning the volume up to hear you speak and then down for the music
@xK90000x yep it'll be better in the future, our bad
He Betrayal on my Istvaann III till I Flight of Eisenstein
Is there a behind the scene for the fusion 360 work on this either on youtube or through the patreaon?
Do you think you could make a b2 or b1 battle droid costume it would be awesome.
This made me harder than terminator armour, In the name of Dorn and the Emperor, let the purging commence!