How To Replace Engine Water Pump 2004-2012 Chevy Colorado

Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ia/1AEW...
This video shows you how to install a TRQ water pump in your 2004-2012 Chevy Colorado. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This process should be similar on the following vehicles:
2004 Chevrolet Colorado
2005 Chevrolet Colorado
2006 Chevrolet Colorado
2007 Chevrolet Colorado
2008 Chevrolet Colorado
2009 Chevrolet Colorado
2010 Chevrolet Colorado
2011 Chevrolet Colorado
2012 Chevrolet Colorado
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXA...
• 10mm Socket 1aau.to/oc/1AXA...
• 13mm Socket 1aau.to/of/1AXA...
• Channel-Lock Pliers 1aau.to/ob/1AXA...
• Hose Clamp Pliers 1aau.to/ob/1AXA...
• 1/2 Inch Air Impact Gun 1aau.to/oc/1AXA...
• 3/8 Inch Drive Ratchet 1aau.to/of/1AXA...
• Torque Wrench 1aau.to/od/1AXA...
• 3/8 Inch Wrench
• Sandpaper
Please consider subscribing: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*

[@Utubegofukurself]

Nice radiator hose "tool" lol. Goes straight back to the tool thats actually works haha

[@japhethbetts4236]

Thanks for the help much appreciated love

[@liftprosper4934]

Yeah, don’t show breaking the clutch fan loose. 🤮

[@hcaveman6954]

What was that tool 🔧 you used to break the fan clutch loose off ? 🤔 ?

[@carlfister7053]

Air hammer. It is a thing not pulling your leg. Life changing tool if u work on stuff alot

[@EPICYELLOWHORSE]

Ha! I came back to ask the same question. Thanks!👌🏾

[@TeZNight]

Thank you for the video. I replaced mine today using your advice. much appreciated

[@Eric48634863]

Thanks, this is a good video with a good explanation and video.

[@williamphillips997]

Use the correct gasket remover and a plastic razor blade. Sanding on aluminum mating surfaces can cause low spots, that leak.

[@TheOldBailey4135]

I did this recently and the special tool from the auto parts store, being thin and the nut being on for many years, did not work. So i had to remove the pump, pully and fan as a unit, not easy nor fun. I had to cut the pump apart with a right angle grinder, then get a pipe wrench on the square fan nut, it finally came apart.

[@tomp3346]

Wondering if you're sure about the 89 inch pounds spec, I've also seen 14 foot pounds in a post I read. Thanks for the video.

[@Jagueyes1]

VERY well filmed and explained.

[@wayfararout6258]

Looks soo easy

[@mer58lin]

Thank You.

[@tylersturguess8644]

Do y’all have a video doing a crankshaft seal on same model

[@luigiprovencher]

So that hose clamp tool was pretty useless.

[@RoqueZuniga-ff1ms]

What year is this model of truck ?