Ciro Frame Mount Highway Pegs
HTML-код
- Опубликовано: 8 июл 2024
- Ciro Frame Mounted Adjustable Highway Peg Mount and Ciro Rail Pegs work awesome with Lower Fairings. Check them out here -shrsl.com/1tnoc
Rail Footpegs - shrsl.com/1tnof
Adjustable Passenger Comfort Peg Mounts - shrsl.com/1r12t
All Music Licensed Through www.epidemicsound.com
#sikbaggers #ciro3d
FOLLOW ME!
Facebook - / stevenleehousden
Facebook Group SIK Baggers - / 427595487637128
Instagram - sikbaggers...
Twitter - StevenHousden?lan...
The video content is available for informational and educational purposes only. Steven Housden, SIK Baggers and/or Advanblack does not make any representation or warranties with respect to the accuracy, applicability, fitness or completeness of the video content. Steven Housden, SIK Baggers and/or Advanblack does not warrant the performance, effectiveness or applicability of any sites listed or linked to in any video content. The information contained in the multimedia content (“Video Content”) posted represents the views and opinions of the original creators of such Video Content and does not necessarily represent the views or opinions of Company. The mere appearance of Video Content on the Site does not constitute an endorsement by Company or its affiliates of such Video Content.
Steven Housden, Advanblack, SIK Baggers assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Any injury, damage, or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user. 
Авто/Мото
These things are sick! Love how they install under the boards ...it really cleans up the front end. Makes a perfect set up for bikes with Lower fairings.
These are advanblack prototypes...they will be out soon.
Look great... With heel on fb. & toes on peg can these be adjusted high enough to slide toes over to brake peddle without lifting foot??? If so I could get rid of ugly ones off crash bars with lowers. I use them all the time. Ty, Steve
@@budirwin9825 Yes I can just move right over to the pedals from here.
@@sikbaggers has advanblack come out with these yet?
@@snomobila no..unfortunately we had a fall out with the designer and these will not be available ..as far as I know there is only a few sets made
There's a difference between watching someone install something and actually getting an explanation and showing key parts of the process, a lot of guys don't get that. Thanks so much for your videos, I'll be installing these today and your video helps a lot. I already installed the Ciro3D adjustable passenger pegs after watching your video on those and it went smooth. Subscribed!
Hey David...playing catch up on my comments after daytona bike week! Thanks for checking it out and alos the sub! much appreciated sir. Im glad the videos are helping you!
Appreciate you boss, looks good!
Thanks Steve for your fast response, I'll check it out.
Youre welcome Dave!
Those are awesome! Definitely going to pick up a pair!
Yeah I really like these compared to the crash bar mounted ones.
I love these mounts I found out the hard way that lean angle grinds them down ordered replacement parts then Ciro refunded me as they were messed up in the first month I had them. Great product and company.
Thanks brother I followed it to a T ...I love it
Steven, you got awesome tutorial videos. everything is explained in details. Thank you!
thank you.
Just installed these, awesome especially with my lowers.
yes I do like them with lowers,...I like the fact I can swivel my foot out and be on the peg and not have to hike my leg up
Just ordered these thank you for the instruction.
Youre very welcome..youll love them..im still rocking these things on my SG
Great video Steven! I'm really impressed with the quality and all the camera angles you captured to show how easily these are put on!
Thank you Sir. Much appreciated. Between these and the comfort pegs in the back for my wife we are set. They are pretty sweet and really easy to install. Thanks again. Cheers!
I've gone through so many highway pegs mounts trying to find the right fit. These are damn perfect and really did install in about 30 mins.....thanks for sharing such an awesome product.
Hey Peter.,.thats awesome man..yeah i love these pegs...quite a different way of putting them on but they are solid and wont spin around or push on you like normal crash bar pegs.
Put these on my RG back in April and haven’t regretted it at all. Perfect adjustability for a short legged person like myself
Hell yeah I love them
Thats what I am looking for. Thanks
Just bought a set for the same issue. Hoping they’ll adjust back enough for my needs.
Just ordered mine
i wanted to give a HUGE shot out to Ciro3d on here because i know you read everything.. first i ordered the hindges led blinkers for my 21 street glide and i broke one of the prongs plugging them in i called Ciro right away they send new ones right out, then i bought the highway frame mount pegs well again something went wrong i stripped the hole out i called them yet again to just buy a whole new set and they sent me just the part i needed for free.. i'm telling you Ciro3d is the best company i ever dealt with. they did not have to do anything to help me but they did more then once. i can not thank them enough.. every light on my street glide is now Ciro3d.. and thank you Steve for everything you do here!!
Thats awesome! They have been an excellent company to work with!
Those look pretty slick
thank you Brent...love them!
Excellent... thank you. I will be buying a set. I like the frame mount versus crash bars :-)
yes sir.,.i love these!
Awesome product
Agreed!! Thanks for checking it out!
Great product
Agreed!
very helpful video thanks👍
Youre very welcome!
Looks good.
Thank you...I have got to ride with them a few times now and really like them.
My fave is whenever you say plethora in your videos
I already have these, but I think I’m going to make some adjustments based on your video. Tweaking them slightly. I think they are the best foot peg option I have seen.
I love them! And yeah it takes a few times to get them exactly where you want them.
First of all, thanks for creating this detailed content. Not disrespecting other creators, but in comparison you took the time to explain in detail the process the Frame Mounted Adjustable Highway Peg Mounts by @Ciro3D... thank you. Unfortunately, I did have a little trouble... by no fault of @Ciro3D instructions. All on me and my mental condition.
Thanks Again,
USAF Veteran
Awesome and I'm glad you got it sorted! Greatful to help!
Getting thos too
Will these work if you have the floorboard extenders ( 1 1/4” ) ? Great video! Thanks
Man these look SHWEET!
Like these
Just ordered them and thought I’d check this video out again
Super easy install and youl love them! Take care and ride safe! Have a happy thanksgiving!
Love them perfect for me being I’m short
Nice install brother 💯
thank you much appreciated.
@@sikbaggers anytime Brother 👍 💯 I think everyone appreciates videos like this
Need you to install some Light Canons too... using the switch by handle bars
Have these in black on my 17 Street Glide and love em. I have lowers and driving lights and these were the perfect solution for mounting footpegs. I can ride with feet on just pegs or heel on footboard and toes on pegs, comfy!
Yeah man I like these compared to the ones I had on the crash bar...really cleans that area up...they do look much better with lowers than without them IMO
With toes on peg and heel on floorboard can you slide toes over to brake without lifting foot???
@@budirwin9825
I have them a bit ahead of brake pedal, so i do lift foot to use rear brake. They are adjustable so you could put them at same level.
Ty for the reply be safe, Ride on
can you attach the bracket where you attached the extended arm? i don't want that much of an extension.
cool
What type of front fender are you running on that bagger?
Hi Steve we just love the simple design of these pegs never seen them anywhere but when we went to order these they only make them for 2009 and up
We have two Harley Fatboys an 07 and an 08 and they don't make them no one does that we know of
We also don't like crash bars they are ugly and when we saw the CIRO 3D highways pegs we were over the moon till we looked and only make 09 and up
Cheers Tony and Sonya Murray
Yes unfortunatly its harder to find parts like this for anything older than an 09...the frames changed on most models in 09...hit up ciro and see if they plan on making anything for the older bikes..I haven't heard anything though.
They wont scrape when you turn tight?
Does these highway floor pegs work on softail bikes Fatboy lo 2010
Very nice Steve ,but I bet the shipping to the UK would be mad lol
Great video ... I've been eyeing these the last week or two for a cleaner look but I'm concerned about clearance issues for hard cornering. I don't see how the bottom piece where it connects to the top piece wouldn't hit the ground before the floor board. I saw one review where the guy stated it was hitting before the floor board. At least the floor board pivots but that other piece is solid. I can't seem to find any solid info. I even emailed Ciro and never got a clear answer, only that the mount area is no lower than the piece it replaced.
Hey Mark these are no thicker than the normal board brackets. They just have the extra bit on the end for the extension part. They seem a lot better built than the OEM ones but no thicker..you should be fine.
Those look great. Would these work with floorboard spacers? Thank you. Keep up the awesome work. 🍻
This is from Ciros FAQ on the link to these " Q: Will the frame mounted highway peg mount work with aftermarket floorboard spacers?
A: No. Our kit is designed to replace the factory front mounting bracket that is bolted directly to the frame mount."
Yea can you please tell us what floor boards those are as well as the brake pedal and shifter
These are advanblack prototypes ...coming out soon.
That looks so much cleaner then the pegs clamped to the bars. Also it looked like it might have enough adjustment for us short legged riders.
Will you be making the ride to Paris, TX for the world record attempt to bring it home on Oct, 5th?
Hey Jason I wish I was man...We are doing AIMExpo in a few weeks and that will be the last thing we do this year out of town.
Hey Man Thanks for the video! I am curious, what are those floorboards and shifter?
The boards I had on here then were one offs custom made for this bike. Sold them a few months ago and switched the the Advanblack boards, shifters and brake
I know this is an older vid but they offer two kinds now regular and extended. I am 6'1 and trying to figure out which ones to get. I have the new Road Glide ST and my leg knee hits the air breather, I can kick my leg up over the chopped engine guard on the left side but the right side is so unfomfortable. Was looking at Engine guard option but think these are pretty nice.
Im 6' and just use these standard ones and like them...havent tried the extended ones though...these are enough to get my leg away from the air cleaner
Hi, do you know if this would work for a Yamaha XVS 650 standard footboards??? please I'm kinda desperate I can't find any adjustable Highway peg like this for my bike. thanks.
Great video... any issue with scraping during hard cornering?
Not at all...we see literally leaving sturgis right now and put on a crap ton of miles in the curviedt places you can ride and zero scraping
Yea really awesome video and another great product from ciro I know it's of topic but I noticed your lower fairing speaker how did you mount the speakers or should I ask what did you use for a speaker spacer I'm doin the fairing set up now and cant find a spacer to fit down in the speaker opening of the fairing thanks for any tips
On this bike I didnt use spacers. I got longer screws. I added all 4 screws in and went in a cross pattern when tightening it down. I did this until it was snug. The hole edges are tapered in so to get it straight I just did the cross pattern. Its been like that for 3 years. No vibration, never came loose...and I didnt have to mess with sanding down spacers to fit.
@@sikbaggers thanks for the reply hopefully it goes smoothly like all your videos thanks again
Thanks Steve, I like these but for those of us that are 6' 4" and have long legs it seems like they would be to close and would not allow for us to have our legs out front like most of us like them to be.
Your thoughts on this please.
Hey Dave..they do have the extended reach arms in the menu as an option that I belove is another 1/5 or 2 inches added to the arm...Im 6 foot and they normal ones are super comfortable for me..i can fully put my foot on there locking my heel in or just slightly turn my foot and have heel on board and toes on the pegs. Its really about the only option for full on pegs that dont attach to your bars...I've been running them for about 4.5 years and love them. I dont know of there is a video out there showing the difference on the two arm lengths though. When I got them they didn't have that option at the time.
Awesome
Where did you get the floorboards and matching brake pedal???
These were one offs I had made for the build.
Looks comfortable and different than all the highway bar mounts. But I'm already scrapping those floor boards on corners. These would limit the lean angle even more for me.
well...not really...as these go out away from the bike it takes a much larger lean to reach them. The farther away from the bike the more angle you need to hit them...and the bases are still at the same mounting height as stock.
What floorboards do you have on your bike ? I have the arlen ness big floorboards was told they wouldn't work on my but that is a cool set up on the highway pegs
These were custom one offs...Yeah I guess these pegs would need ot be mounted with normal or maybe slightly bigger boards but not too much up front
Great videos! my 2015 SGS is the same color! what floor boards are on the bike in this video? do you scrap them in the corners? they look like they have good clearance. Thanks
Thank you...the boards are on offs I had made for the bike. Ive ran some huge boards and never scraped boards...you will drag the bottom edge of the board bracket before you scrap the boards.
@@sikbaggers thanks for the reply! your scoot looks awesome.
Thinking of getting these for my road glide but a concern I have is if these are close to or interfere with the brake pedal if the pegs are in the upward position ?
Still a few inches away from the brake pedal even when put up
What type of wind shield is that on the bike ? What size is it? Thank you
Klockwerks 6.5 flare dark. Here is my video on how to measure for a klockwerks ruclips.net/video/6Rr2RV9sChI/видео.html
Hey I’ve seen the floorboards on most of your videos but what floorboards are these? I want to instal these on my streetglide!
They are custom made one off's made for this bike.
Hey Steve where did you get your floor boards
these were one offs I had made a few years back.
Steve I noticed on this video that you changed floorboards from the rubber inserted HTTMT. After seeing your first install, I installed a set on my StreetGlide. The rubber insert fell off. I tried ordering another set of inserts and got a run around ffrom the company and because I was entering the bike in an Best of Event contest (of which I wond...YaY) I ordered another whole set of the floorboard. I like the set you have on your bike now. So my question to you is who's the manufacture & model info for your new ones.
Yeah I just changed them a few weeks ago. These are prototypes from advanblack. They were designed by Squeeks Big Twins down the road from me and are being manufactured by Advan soon. We will have these in black and chrome out very soon. I'll do a video on them when they are released for sale.
Steve do those come in all black ?
Yes black and chrome...click the link below and it will take you there and u can pick black or chrome
Anyone installed these with pingel floorboard extenders on your bike ? These are the ones that move floorboards out 1 1/4". Thanks Miike
Hey Michael, Ive waited to see if anyone responded here and I dont see anyone yet...I'd give Darren a call over at Ciro...Im sure someone has asked him or maybe they have seen this combo at a rally...he would know for sure i'd think. Call ciro and click through to service or ask for Darren
@@sikbaggers Hi Steve thanks for responding, I talked to Darren and he said I would have to get some spacers equal to what my floorboard extenders are, in my case that would be 1.25" which I'm ok with as long as the floorboards don't get flimsy on me. I already ordered and received the highway pegs, didn't install yet as I'm waiting on this Wisconsin weather, I'll let you know how it turns out. I sure don't want to give up my extenders.
Does this cut the lean/turn angle?
these go right where your floor board is now and goes up from there. Without it hanging any lower than your board it will not interfere with leaning.
Morning Steve, question for you .
I am a parts manager for a Harley dealership here in oklahoma . And I have alot of Ciro and custom dynamics lights on my 2013 FLHX . my question is , how can I get some Ciro Products to try and display on my bike ? Alot of customers love my bike and it helps customers with items to buy. Basicly my bike sells Ciro and C.D. PRODUCTS ..lol.
Well good luck getting anything from CD for les than your normal dealer discount...Ciro may work with you but I cannot speak for them...I would just give them a call and see what they can do.
Do these work on softails as well?
I do not believe so as they are not listed on the fitment chart
Where’d you get them floor boards?
Custom one off floorboards that were designed for my bike.
How much lean angle do these kill?
why would they kill any lean angle? All your doing is replacing the floorboard bracket with one that has this peg mount on it and it comes out on the top of the bracket and then extended out at an upward angle away form the bike. If you werent scraping your stock boards you wont scrape these.
@@sikbaggers Thanks.. That's what I needed to know.. Unfortunately, I REGULARLY scrape my floorboards (U-Turns, Some Corners, Full Lock turns, and general Practicing [Been riding 60 years and I practice on a regular basis] ) These are too nice to scuff up (not to mention not cheap!). And the second downside is that according to their website, they won't fit an '08 Ultra Classic...Damn!
Oh well! Thank you for the great content you bring to your videos. I enjoy them tremendously.
thos the standard or extended length?
these are the standard ones.
did we get a new camera
Last year I picked up this 4k canon camera...its pretty awesome
do yall have stuff for vtx 1800 f 2005
Im sorry Tim not at this time.
Anybody seen the extended version of these (60600)? I can't seem to find them anywhere.
They've been BO for monthssss... I made up my mind and will get the standard ones!
@@max2k15 I'd be very interested in knowing how they fit you, and how tall you are. I've been toying with the same idea, but it's a big investment for something that I may not he satisfied with. Thanks Max!
What floor boards are those?
custom one offs I had made for this bike.
Just curious, did Ciro send these to you in order to review?
Hey Chris...I have done some videos for sponsored products from ciro however these were purchased and installed well before that. If you check out my latest video on the biker bar you will see I still have these on my bike to do. I shot this video 4 years ago. Also, whether I'm sponsored our not on a product I shoot straight from the hip...if its trash I will tell you. Please dont hesitate to ever ask me a question about a product I have on my channel .This video is new and start at 9 minutes where you can see these are still being used today. I love them! ruclips.net/video/E-YPhnh7Cfw/видео.htmlsi=8gkD4DUKas5mamal&t=543 ..thanks for checking it out!
@sikbaggers Thanks for the reply! I watch alot of reviews on YT before major purchases, so I just like to know the situation with the reviewer and the company. Thanks so much for your honesty. It's much appreciated. Be safe out there
What floorboards are you using ?
I would really like to know what these are as well, they look really awesome.
These are advanblack prototypes..hopefully out soon.
@@sikbaggers Awesome, i would love to buy a set! They look great.
Are these made for Indian ride an Indian Chief
Hey ron I dont think so bro..but you can call Ciro and ask..I dont see anything listed for a Indian though
They don't come with foot pegs??? $250 for the Mount, and $99 for the pegs, jeez.
TR ansport I just went to their website and thought “I’m getting these.” I saw that price and thought, “nope.”