Ciro Filler Panel Lights Install and Review

Поделиться
HTML-код
  • Опубликовано: 19 сен 2021
  • 🔵Get yours here - shrsl.com/35qe0
    In this video I will walk you through the super simple plug-n-play installation of the Ciro Filler Panel LED lIghts. These things add some much-needed light to the back of your bike! They will only work on the '14-UP STREET GLIDE / SPECIAL, ROAD GLIDE CUSTOM, ROAD KING SPECIAL fender extension and not the aftermarket extended fender extensions. These lights have been designed to complement the OE styling of your bike while creating a custom look with their brilliant chrome or gloss black painted housings. Using high-quality Everlight® automotive-grade certified LEDs, paired with a specially designed wide view angle lens, these run, turn, brake lights are sure to draw attention.
    #sikbaggers #ciro3d #ciro
    🔴GET SOCIALISTIC
    🔗Facebook Group SIK Baggers - bit.ly/38GRKgI
    🔗Instagram - bit.ly/2HwBZge
    🔗My LINKTREE - linktr.ee/sikbaggers
    🎵All Music Licensed Through www.epidemicsound.com
    🚩The video content is available for informational and educational purposes only. Steven Housden, SIK Baggers does not make any representation or warranties with respect to the accuracy, applicability, fitness, or completeness of the video content. Steven Housden, SIK Baggers does not warrant the performance, effectiveness, or applicability of any sites listed or linked to in any video content. The information contained in the multimedia content (“Video Content”) posted represents the views and opinions of the original creators of such Video Content and does not necessarily represent the views or opinions of the Company. The mere appearance of Video Content on the Site does not constitute an endorsement by the Company or its affiliates of such Video Content.
    Steven Housden/ SIK Baggers assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Any injury, damage, or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user.
  • Авто/МотоАвто/Мото

Комментарии • 102

  • @ThePapagonza
    @ThePapagonza 2 года назад

    Glad to see you back man! Nice vid and lights.

  • @justanotherviewer52
    @justanotherviewer52 2 года назад

    Thanks Steve. Yet another simple, straight forward Ciro install. And they look great.

  • @benpadilla157
    @benpadilla157 2 года назад +1

    Great video brother it is good to see you back making video's I appreciate it gonna go check those out for my 14 street glide

  • @thomasmiller7900
    @thomasmiller7900 Год назад

    You added some stuff on the saddlebag lights that definitely needed adding. That for doing that. You are just wonderful!!

  • @rickketchumn4458
    @rickketchumn4458 2 года назад

    Thanks for your time great video I will be picking me up some of those lights

  • @drillmaster3000
    @drillmaster3000 Год назад

    Super easy to follow along. Thanks for the steps

  • @SoloVision42
    @SoloVision42 2 года назад

    Looks good as hell!

  • @jett2851
    @jett2851 Год назад

    I added both these filler lights and the ciro turn signals and it is awesome.

  • @michaelterry885
    @michaelterry885 2 года назад

    Looks nice very smooth

  • @JasonSnailer
    @JasonSnailer 2 года назад

    Just ordered these and the saddle bag latch lights. Your channel is amazing. Thank you so much

    • @JasonSnailer
      @JasonSnailer 2 года назад

      I’m about to install these right now while watching your video. Thanks again

  • @FHOHNIC
    @FHOHNIC 2 года назад

    I have these lights and love em

  • @cd4917
    @cd4917 2 года назад

    Thank you, after a watching a few of your excellent videos, I got the Ciro filler panel lights, the bag blades, the Ciro headlight bezel and the front forkini lights. All simple installs and my 21 SGS looks freaking Amazing along with an Led light kit, I also installed an Led strip I. The front batwing vent...running blue on chrome😁

    • @sikbaggers
      @sikbaggers  2 года назад +1

      That sounds awesome! I love my ciro lights! Always top knots products!

  • @mfennroberts
    @mfennroberts 2 года назад

    I'm sold...I like that look. Thanks again Steve. One of my favorite HD install video go to places... Hell, I think I'm going to buy a SIK Baggers t shirt.

    • @sikbaggers
      @sikbaggers  2 года назад +1

      Thank you Michael! Ill be doing a shirt order over on the facebook group real soon ....the t shirt guy is having a hard time getting blkack hoodies right now and I want to be able to offer them.

  • @richschaffling2367
    @richschaffling2367 2 года назад

    Great video as always ….. I need a set of those

  • @robertomolve3867
    @robertomolve3867 2 года назад

    They look awesome!

    • @ytramla2370
      @ytramla2370 2 года назад

      Will this fit a 2020 Indian chieftan.

  • @FHOHNIC
    @FHOHNIC 2 года назад

    Love Em

  • @TheRoadGlideRider
    @TheRoadGlideRider 2 года назад

    I wanted to add lights to the rear. But I have the Rear Fender extentions that cover the cut outs. These answer the light additions. 🏍💨🏍💨

  • @ryanm8456
    @ryanm8456 2 года назад

    Excellent video. I’ll be back for more.

    • @sikbaggers
      @sikbaggers  2 года назад +1

      Thank you Ryan! Much appreciated sir.

  • @user-cp6tj6sb7w
    @user-cp6tj6sb7w Год назад

    New to the channel, ty this is so helpful and easy to follow. One question are there any Ciro antenna filler lights for the rear ?????

  • @u.s.aarchangelforgod3679
    @u.s.aarchangelforgod3679 Год назад

    Thank you sir awesome

    • @sikbaggers
      @sikbaggers  Год назад

      Thank you for checking them out! Much appreciated!

  • @Big88Country
    @Big88Country Год назад

    Thanks for another quality video Steve! My 2017 CVO Ultra has the filler panel. When I go to the website looking for lights like these, they tell me these are not for my bike. I got the bike used, but pretty sure whoever had the bike before me didn't add the filler panel, heck, it was rarely ridden. This is 2023 and it had only 5023 miles. It's like the tour pak quick disconnect setup, the stuff I have to buy is normally for the street glide, but that always leaves me wondering if the electrical hookups or the bolt holes are gonna line up right with my bike. Why did I have to buy a dang CVO?? Naw, just kidding, I love that bike!! Thanks Brother!

    • @jonbassett8023
      @jonbassett8023 11 месяцев назад

      Don't buy this junk. I wasted $400.00 on this chinese garbage! They fail within a year & ciro won't bak them up! EPIC FAIL!!!

  • @Repz06
    @Repz06 11 месяцев назад

    Nice job

  • @roadtaco3924
    @roadtaco3924 Год назад

    Appreciate 👌🏾👌🏾

  • @gregsc6418
    @gregsc6418 2 года назад

    Nice job, thanks for not installing them on a black bike. I’ll be buying them now.

  • @jasonbreedlove495
    @jasonbreedlove495 2 года назад

    Solid video. Been on the fence bc I love the look of these, and how much light/visibility you gain. Still wondering if I want that much chrome on the back fender though.

    • @jonbassett8023
      @jonbassett8023 11 месяцев назад

      These lights are JUNK!!! And Ciro will not back their products because they know they're GARBAGE JUNK! ! LED's fail within 2 years & covers crack & fall off! Paid almost $400.00 and have had THREE separate issues!! Took em off & threw em away! CHINESE JUNK!! WASTE OF MONEY!!!!!!!!!!!!

  • @robertmorenoii4399
    @robertmorenoii4399 2 года назад +1

    I like it

    • @sikbaggers
      @sikbaggers  2 года назад

      Thanks for checking it out Robert! take care and ride safe.

  • @eldenarios5287
    @eldenarios5287 Год назад

    Hi Steve, great video (as usual)....do you know if these would fit on an extended fender fascia? Have a 5" extended fender but not sure if the curve will fit these lights. Thanks.

    • @sikbaggers
      @sikbaggers  Год назад

      Thank you for your feedback! I'm glad to hear that my video was helpful to you. I'm sorry but no they are made for the oem fender extension.

  • @Bamdoggs
    @Bamdoggs Месяц назад

    As always… dig the lights and ur install vids…
    Came back to watch this just to ask this question… What is the color of that bike? Is that the Wicked Red??

    • @sikbaggers
      @sikbaggers  Месяц назад +1

      thank you sir..it is Hard Candy Hot Rod Red Flake

  • @alanwagers7073
    @alanwagers7073 3 месяца назад

    Another great video , hey can I add them to a freewheeler 2016 ,thanks

    • @sikbaggers
      @sikbaggers  3 месяца назад

      these fit the fender extension exactly, it has a curve in it so they will not work on a freewheeler.

  • @babyboy4241
    @babyboy4241 Год назад

    i am getting ready to do the Ciro bagger lights and Ciro Panel lights, the connectors you said to "daisy," I didn't really catch that part. I was somewhat puzzled -but I will figure it out...still good vid!

    • @sikbaggers
      @sikbaggers  Год назад +1

      what i mean by daisy is connecting one to the next..its really just like plugging in drop cords to one another...your just chaining the lights together

  • @davep0639
    @davep0639 2 года назад

    What's going on with the right rear turn when you have the hazards on? It's the only one not flashing. It seemed to be working fine in some of the other shots you had except for that one. I have turns from the "other" major Harley aftermarket LED manufacturer and I have some goofy little issues happen with them too from time to time.

    • @sikbaggers
      @sikbaggers  2 года назад +3

      this bike had a bad OEM tri bar light in it..had nothing to do with the added LED lights. We replaced it with a custom dynamics tri bar light and all is well.

  • @SaltyDog711
    @SaltyDog711 Год назад

    Does the Ciro lights come with the daisy chain attachment to connect other lights or is that something to buy separately?

    • @sikbaggers
      @sikbaggers  Год назад

      These lights have a splitter and depends on what lights your asking about...most of them either daisy chain, which means the next set of lights you get will simply plug inline with these and some come with a splitter so you can dd more lights that way...2 different ways oif adding more lights.

  • @rodneyhanbaum697
    @rodneyhanbaum697 2 года назад

    I definitely need these and the saddle bag light kit! Rollin up 57 every morning, then 148 in total darkness, I want to be seen, not viewed!

    • @sikbaggers
      @sikbaggers  2 года назад

      I hear ya Rodney! Deer season started too so be more cautious out there buddy!

  • @joem7260
    @joem7260 Год назад

    Would these work with the advanblack fender extension as well? Thanks

    • @sikbaggers
      @sikbaggers  Год назад

      No they will not work the extended version...its made strictly for the oem extension which has a different profile the the extended version.

  • @robertpaytosh7083
    @robertpaytosh7083 Год назад

    I have the stretched rear fender from Advanblack on my Streetglide. Would these still work, they look like different fitment due to the cuts for the pipes.

    • @sikbaggers
      @sikbaggers  Год назад +1

      no they are for the OEM fender extension only

  • @MrMorepower71
    @MrMorepower71 2 года назад

    Are there any products remove the lightbar after installing these? Not a fan of the round lights and want to run these and bag blades.

    • @sikbaggers
      @sikbaggers  2 года назад +1

      if you remove the lgiht bar from your stock fender you will have 3 hole sin the fender you will need to cover with something. Your best bet would be to look at a new fender like the Dominator fender from Advanblack.

  • @u.s.aarchangelforgod3679
    @u.s.aarchangelforgod3679 Год назад

    Hi steve I wanted to know, I have the old style Advanblack Dominator fender would the Ciro light fit that rear fender? Thanks

    • @sikbaggers
      @sikbaggers  Год назад

      hey! Not sure what you mean on the old style dominator...there is only one dominator fender...so let me know and ill try to help

    • @u.s.aarchangelforgod3679
      @u.s.aarchangelforgod3679 Год назад

      @@sikbaggers Hi Steve, you had a video on the Tab Performance 50 Cal slip ons, your bike and a customers bike the fender on the customers bike. You tried to put your bag on that bike to see if the 50 Cal would fit, that’s the same exact fender I have on my bike. Thanks .

  • @rjdavis947
    @rjdavis947 2 года назад +1

    What light is that on top of the turn signal bracket?

  • @anononononononon66
    @anononononononon66 4 месяца назад

    Steve - I really hope you see this as I have a super simple question but this is a older video.
    What are the covers on the engine guard/crash bar of the bike in this video? I may be bad at searching but don't see mentioned anywhere. Thank you in advance!

    • @sikbaggers
      @sikbaggers  4 месяца назад

      Hey...saw it! Lol they are normally called soft lowers or engine guard chaps...here is a set amzn.to/3IulcK7 these are super nice with pockets for storage but there are some cheaper versions with nothing on them as well.

    • @anononononononon66
      @anononononononon66 4 месяца назад

      @@sikbaggers Awesome - appreciate it!Leather looks much better than canvas ones I saw - not sure why I didn't think of it.
      Long term some paint matched lowers is the goal, but for now these will help extend the Michigan riding season for me.
      Thanks again!

  • @T.K7601
    @T.K7601 Год назад

    Does that hyper flash trick work for a 08?

    • @sikbaggers
      @sikbaggers  Год назад +1

      no it does not..the 13 and older do not have that built in to theECm...however you will either need load resisters or call custom dynamics, they have plug and play resistors that are inline

  • @matthewbarrett325
    @matthewbarrett325 11 месяцев назад

    Will these work with the Advanblack fender extension?

    • @sikbaggers
      @sikbaggers  11 месяцев назад

      no they will not..made for oem extension.

  • @dcdell2008
    @dcdell2008 2 года назад

    What is the name and model of that seat on the SGS? thanks for sharing

    • @sikbaggers
      @sikbaggers  2 года назад

      Not sure ...was a customers bike.

  • @gabrielrodriguez8383
    @gabrielrodriguez8383 2 года назад

    Can I put these on my 06 street glide

    • @sikbaggers
      @sikbaggers  2 года назад +1

      The connector that is with them is for 14 up...You may call Ciro and ask if they have any adapters though.

  • @FLHXDUDE
    @FLHXDUDE Год назад

    Hey Steve, I ordered the Ciro filler panel lights for my 19 flhx. I have the extended advan tri-bar lite. These filler lights won’t work will they?

    • @sikbaggers
      @sikbaggers  Год назад

      no those are made for the stock extension

    • @FLHXDUDE
      @FLHXDUDE Год назад

      Yea I’ll be returning those, but the latitude plate looks awesome. Love the content!!!

  • @robertohernandez-yh7ol
    @robertohernandez-yh7ol 2 года назад

    What led bullet turn singles do you recommend

    • @sikbaggers
      @sikbaggers  2 года назад

      are you needing the whole turn signal or just the inserts and what are you putting it on?

  • @marco-tiopet4020
    @marco-tiopet4020 2 года назад

    👍

  • @andremartinez4061
    @andremartinez4061 2 года назад

    I’m confused …. My fender on my RK special ‘18 is almost identical but they don’t fit ? Thanks for the help in advance !

    • @sikbaggers
      @sikbaggers  2 года назад +1

      Does your road king have a fender extension with tri bar light at the bottom like street glides and road glides? or do you have a gap on each side of the fender bewteen the fender and bags?

    • @andremartinez4061
      @andremartinez4061 2 года назад

      @@sikbaggers I have the hogworks fender extension with the bottom tri light

  • @Hhhhhgggihgdd
    @Hhhhhgggihgdd Год назад

    Would it matter that I have extended bags and extended fender panel that I put on my 18 street glide ?

    • @sikbaggers
      @sikbaggers  Год назад

      they will not work with an extended fender ...only the stock OEM extension

    • @Hhhhhgggihgdd
      @Hhhhhgggihgdd Год назад

      @@sikbaggers well that sucks , thanks for responding.

  • @darkman8022
    @darkman8022 2 года назад

    I like you bag latch lights but have other lights buy another company will you lights work with them?

    • @sikbaggers
      @sikbaggers  2 года назад +1

      Yes there is no reason why they wouldn't. All of the connectors are plug and play and they are just LED's so you will have no issues mixing and matching lights.

    • @darkman8022
      @darkman8022 2 года назад

      @@sikbaggers Thank you sir

  • @KeithR1250
    @KeithR1250 2 года назад

    Hey!
    You must have some nice wheels on your truck since you're advertising for Custom Offsets.. 😏😉

    • @sikbaggers
      @sikbaggers  2 года назад +1

      yeah you spend enough money there they throw in a free cheap t shirt lol

  • @LifeontheBlacktop
    @LifeontheBlacktop 2 года назад

    😂 Dang those old wives' tales! 😂

  • @frankmccracken1160
    @frankmccracken1160 4 месяца назад

    Easy open child resistant package!!

    • @sikbaggers
      @sikbaggers  4 месяца назад

      hahahha yes, for sure!

  • @heritage_cowboy6568
    @heritage_cowboy6568 2 года назад

    OMG....I went to order a set and their out of stock....I'm in tears here.....lol

    • @sikbaggers
      @sikbaggers  2 года назад

      what year and color combo are you looking for?

    • @heritage_cowboy6568
      @heritage_cowboy6568 2 года назад

      @@sikbaggers black frame w/smoke lense. 2021 street glide special

  • @Tumble96
    @Tumble96 8 месяцев назад

    Because bikes are just as hardheaded as the driver

  • @Americanpatriot602
    @Americanpatriot602 Год назад

    Those are some expensive lights!

    • @sikbaggers
      @sikbaggers  Год назад

      expensive compared to what other brand making these?

    • @Americanpatriot602
      @Americanpatriot602 Год назад

      Not really compared to anything,, ya definitely get what you pay for with Ciro! They seem legit! I like what i see!

  • @dr.h9309
    @dr.h9309 2 года назад

    A bit deceiving. If they don’t “fill” they shouldn’t be called filler lights