I got filler panel lights from Ciro for my boyfriend for Christmas. We are just waiting for it to get warm enough here in Indiana to install them! Can’t wait!
Hey John, I made it to the Ciro booth on Monday, sorry to miss you, great high quality products, got the black drink holder. Great video! Joe Zednick Ocala Fl.
Hey John, New to your channel and also new to Harley,, You do a fantastic job with these videos and so helpful,, Thankful you give so much of your time !! Ive been on Yamaha for 30 yrs and finally made the move to a 2014 ultra classic ltd.God why did i wait so long.. Keep up the great job and thank you from Canada !!!!!
Hey Man, I just want to thank you for the stickers, and for taking a couple of minutes out of your busy day there at Bike Week to chat with my wife and I.
Just had the same install done Friday at the Bruce Rossmeyer’s booth location by Ciro. Looks fantastic and feels like I’m seen better then 2 stock lights. 18 Legend denim blue SG
Hey john give u a tip from an automotive painter just thump the end of the 3m molding tape and the end will separate enough that you can grab it makes it super easy
Great video as usual. I was looking to add more lights to my SGS but not sure what I wanted. The Ciro looks good, doesn’t require cutting, and I can install them myself. Sold.
Hi John. Ciro lights look great, also like the bars on your Heritage. Considering changing the bars on my Heritage, hope we see a video on your bars install. Thanks for the videos.
Thank you so much for this one; this is (almost) the exact setup I'm going to have on my FLHR before too long - Ciro Bag Blades + filler panel lights, + Custom Dynamics ProBEAM taillight. Glad to hear your comments and approval on the brightness - the idea is to make the back end impossible to ignore when I'm stopped. Any suggestions for a license plate mount for when the current cross-bar signal lights are removed?
Did you get the Ciro filler panels installed? I can't decide between Ciro and Custom Dynamics. The CD looks a lot brighter but I like the looks of the Ciro panels better.
You know John you can snap a shot from your go pro if you are recording after the ride if you caught it on camera. Great info going to Laughlin this April sorry you won't be there but I will make sure I stop at the ciro booth.
Great video John, as always. Question: the fillers I understand, but the blades on the bags - how is that wired for removal of your saddle bags? I have an 18 Road Glide Special and it has speakers installed in the side bags. I don't know if this is just a messed up install, but its very difficult to remove my bags because it doesn't have user friendly speaker wire disconnects??? Those are a real pain to get loose and now the wire connectors disconnect themselves while riding. The wires themselves have that self adhesive tape and they fall off too. It's as if they were stuck on without first prepping the surface. I'm going to take it back to the dealer but I don't know what to look for in an improvement to their install? Any advice for me or can you make a video and point out how this install should have happened?? Thanks you ROCK!
Black Bikeweek, tell me more about this event. No matter to the color of our skin, we ride. That's a family event that brings us together as family. I'm stoked at an opportunity to build new relationships. Family! It's got nothing to do with being blood, it's about family
@@jimipeek2677 During the segregation era Atlantic Beach was the only beach in the South where blacks were permitted. The Black Bike Week rally, originally called the Atlantic Beach Memorial Day BikeFest, was founded in Atlantic Beach by the Flaming Knight Riders motorcycle club in 1980. The first rally drew about 100 participants.
@@RenegadesGarage I'm not here to debate. I like this channel and i learn alot from it. I've given you the history of black bike week and why it exists. if you don't like it. hey that cool! The history of our country speaks for itself. Have a safe riding season to all.
@@RenegadesGarage black bike week name came directly from the segregation era. If you feel that the name should be change then instead of having 2 different bike weeks at myrtle beach. Do something to change that. Debating me over the internet does nothing.
Thanks John! Enjoyed the video. It looked like black street glide in the video had a seat with an Adam Sandoval seat on it. Does Adam have a seat line?
hey you going to mention that audio device you have between your bars. I saw that while I was down visiting you. you said you would talk about it at some point. really compact for sure. I like it.
never enough time. I don't see how some people put out a video every day. I am retired and would not have the time lol. well good deal. it was great seeing you also last Saturday. take care.
Nice vid once again John! Those look pretty badass! I also dig that she is rolling the #tabperformance BAM Stick exhaust that are made right here in my hometown of Lincoln, NE! Thanks again for the awesome content!!
John, I like how Ciro’s Lights and Filler Panels look. I already follow Ciro on Facebook and Instagram. I just started following you on Instagram on Sunday Night, I found you on Shadetree Surgeon’s Page. I may have blown up your notifications. My icon is different but same dog.
Hi there, if you visit us at the Daytona International Speedway there is an installation charge but it's really competitively priced! If there's a specific product you want to know the installation charge of, please email azura@ciro3d.com
I know John likes where he lives and works, but I bet some dealer out there would give their right arm to have a tech/mechanic with a following like his, to work at their service department. If he lived here in Orlando, I'd break down and buy a Harley knowing he's a mechanic at a local dealer. Not to say that the local techs are bad, but one dealer I know of in particular could use a boost in reputation points.
Cool to see this one up so quick. Great getting to say hi on Saturday. Wish I had known more about the ciro products before I went my light setup... but always the next bike right?
The new Softail frame is just as smooth as the baggers, but about 200 pounds lighter. Mine is an 18, and the 114 baggers weren’t out until 19. That’s the quick reason.
Great video, as always. Are you and Ciro going to be at Ocean City/DelMarVa Bike Week this year? I've been filling out the back end of my 18 FLHTK lighting with HD parts to make it look more complete. But, Ciro really has my attention for the front end extra lighting.
Whut up!! Is there any chance you can do a video about the difference between the standard primary cover vs the narrow cover on the M8? And how’s the Heritage feeling?🤙
Curiosity has got me by watching the installation where it is plugged in I have a luggage rack on my 2019 FLTRXS with the extra light that installs underneath that I installed. Will that be an issue or is this set up to add in along side
John I hate to ask this on a video promoting Ciro lights but I'm looking to get the filler panels for my Ultra Limited but can't decide between Ciro and Custom Dynamics. I love the look of Ciro's product but they don't look very bright compared to the Custom Dynamics. Can't find any side by side comparisons online and figured you have probably seen both. Are they that way in person? Thanks
I love you videos brother. I just have one question. I see you wear sunglasses in some of your videos, and i need to know how do you get them not to fog up in the helmet?
Hi John. Really enjoy your vid's, very informative and funny too! Wondering if you could point me in the right direction. I'm looking for the stock tank emblems for my 1992 FXRS-SP . Had a dent removed and tank repainted but am having no luck finding the emblems. Would like to keep the bike lookin' stock as possible. If you have any suggestions as to who to contact It would be greatly appreciated. Tried J&P Cycles but noda. Thxs and keep them vid's comin'!
John Maxwell yea I went back and checked I haven't missed any of you videos! I had a blast at Daytona but only could stay one day had reservations in key west!
The Ciro3D filler panel lights I installed on my 2017 Ultra Classic used stainless steel bolts and locknuts instead of double-sided tape. I thought a Street Glide would be the same. What's the difference?
The only double sided tape I’ve seen that’s come apart (when installed correctly) is on a bike that got thrown from a shed during a tornado a few weeks ago. It’s pretty strong stuff!
@@TheHarleyTech Does it require a new paint touch up or the clear coat if you have to remove them say the lights start going out due to a defect? Also, did they mention anything about making their current road king version a little cleaner looking like this set?
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Happy to see you back on here .
My gal and disabled son love watching your videos .
Hes 10
Great video John. Congrats to the winner. I know she was supper happy about that. She will enjoy the new lights. Thank you for showing us the install.
I got filler panel lights from Ciro for my boyfriend for Christmas. We are just waiting for it to get warm enough here in Indiana to install them! Can’t wait!
Cool you an awesome gf .
Laura Criss your a nice girl to do that...
StratNut2008 thank u!
Very cool
Congratulations to a sister rider who has a badass bike
John, it was great to meet you at the Ciro booth Saturday. Thanks again for the sticker and all that you do.
Hey John, I made it to the Ciro booth on Monday, sorry to miss you, great high quality products, got the black drink holder. Great video!
Joe Zednick
Ocala Fl.
Hey John, New to your channel and also new to Harley,, You do a fantastic job with these videos and so helpful,, Thankful you give so much of your time !! Ive been on Yamaha for 30 yrs and finally made the move to a 2014 ultra classic ltd.God why did i wait so long.. Keep up the great job and thank you from Canada !!!!!
New bars look sick, hope there's a video coming.
Hey Man, I just want to thank you for the stickers, and for taking a couple of minutes out of your busy day there at Bike Week to chat with my wife and I.
Anytime man! Thanks for coming!
Nice looking there John, thanks for the awesome contest. It was cool to see the winner thanks again.
Just had the same install done Friday at the Bruce Rossmeyer’s booth location by Ciro. Looks fantastic and feels like I’m seen better then 2 stock lights. 18 Legend denim blue SG
Two Dirty Thumbs Up for the complete install look and safety for the rider in traffic.
John, I feel like your beard growth has been tremendous since the first video I watched. Love the channel.
It's was great to chat with you at the Speedway, ride safe. Two dirty thumbs up 👍👍
I’m glad we got to meet!
Hey john give u a tip from an automotive painter just thump the end of the 3m molding tape and the end will separate enough that you can grab it makes it super easy
Ciro stuff is the deal. Have a few of their products on my RGU. Another great video. Thanks John.
Nice, lights look good on that bike. Were headed down Friday. Hope yall had a good week.
That new Sandoval seat is on my wish list. Great video. Keep’em coming...
Great video as usual. I was looking to add more lights to my SGS but not sure what I wanted. The Ciro looks good, doesn’t require cutting, and I can install them myself. Sold.
lite it up lite it up Hopefully Ciro3D will expand to earlier models cool products
Check the description, they go back to 06 (beginning of street glide)!
Thanks you’re the best
Man, That looks slicker than snot on a doorknob! Ciro is the real deal, gotta get me some...
Reese! Nice bike! Congrats on the win. Great vid as always John
Hi John. Ciro lights look great, also like the bars on your Heritage. Considering changing the bars on my Heritage, hope we see a video on your bars install. Thanks for the videos.
It’s coming!
Thank you so much for this one; this is (almost) the exact setup I'm going to have on my FLHR before too long - Ciro Bag Blades + filler panel lights, + Custom Dynamics ProBEAM taillight. Glad to hear your comments and approval on the brightness - the idea is to make the back end impossible to ignore when I'm stopped.
Any suggestions for a license plate mount for when the current cross-bar signal lights are removed?
Did you get the Ciro filler panels installed? I can't decide between Ciro and Custom Dynamics. The CD looks a lot brighter but I like the looks of the Ciro panels better.
@@motorcycleden I haven't yet. Decided to buy slip ons first since the Arlen Ness Redlines I wanted are sometimes a bit hard to find.
@@CyphDragon I can definitely understand that. Thanks
Take a picture with my Dads Yellow Street Glide at the Arlen Ness Booth! He’s the Sales Manager at Ness. We’d greatly appreciate it, huge fans!
Ahh, I’m already back home!
You know John you can snap a shot from your go pro if you are recording after the ride if you caught it on camera. Great info going to Laughlin this April sorry you won't be there but I will make sure I stop at the ciro booth.
I wasn’t recording.
I wasn’t recording.
1 day you will be the GM of a shop. Ima huge fan
Jeez your getting close to 100k. That was fast, well done.
Great video John, as always. Question: the fillers I understand, but the blades on the bags - how is that wired for removal of your saddle bags? I have an 18 Road Glide Special and it has speakers installed in the side bags. I don't know if this is just a messed up install, but its very difficult to remove my bags because it doesn't have user friendly speaker wire disconnects??? Those are a real pain to get loose and now the wire connectors disconnect themselves while riding. The wires themselves have that self adhesive tape and they fall off too. It's as if they were stuck on without first prepping the surface. I'm going to take it back to the dealer but I don't know what to look for in an improvement to their install? Any advice for me or can you make a video and point out how this install should have happened?? Thanks you ROCK!
John that cluch cable looks fine it's relaxed. Size does matter that's what my wife says lol . Great man with giveaways 👍👍👍
They need to come out to black bike week. I would definitely purchase there stuff
Black Bikeweek, tell me more about this event. No matter to the color of our skin, we ride. That's a family event that brings us together as family. I'm stoked at an opportunity to build new relationships. Family! It's got nothing to do with being blood, it's about family
@@jimipeek2677 During the segregation era Atlantic Beach was the only beach in the South where blacks were permitted. The Black Bike Week rally, originally called the Atlantic Beach Memorial Day BikeFest, was founded in Atlantic Beach by the Flaming Knight Riders motorcycle club in 1980. The first rally drew about 100 participants.
@@jimipeek2677 if you need additional information please don't hesitate to ask. I'm a history buff
@@RenegadesGarage I'm not here to debate. I like this channel and i learn alot from it. I've given you the history of black bike week and why it exists. if you don't like it. hey that cool! The history of our country speaks for itself. Have a safe riding season to all.
@@RenegadesGarage black bike week name came directly from the segregation era. If you feel that the name should be change then instead of having 2 different bike weeks at myrtle beach. Do something to change that. Debating me over the internet does nothing.
I love Ciro3D products. Can't wait to get them for my 2018 Goldwing
Hey John good vid, but bro when you did you install your new toys on your bike. Look awesome need more pics.
You the Man John! Congrats to the winner!
Thanks John! Enjoyed the video. It looked like black street glide in the video had a seat with an Adam Sandoval seat on it. Does Adam have a seat line?
He does! Brand new released at Daytona from Ciro.
Thanks John... I sent him a note asking about how to go about looking at them. Enjoy FLA and keep the shiny side UP! :-))
@@JimPoston1 here's the link to check out the ASR Seat: www.ciro3d.com/product/asr-seat-by-ciro-r
Looking forward to seeing the bar install video ;)
Grats to that young lady in the giveaway. sweet bike she's got!
I missed ya Saturday man, but bike week was nuts as ever
Makes me wish my dealer was more in tune with Ciro than with the other company I ended up going with. I think I'll mention it to them later today.
Thanks Scurvy, we appreciate you spreading the word about Ciro to your dealer! If they have any questions, have them give us a call at 715-808-0027.
hey you going to mention that audio device you have between your bars. I saw that while I was down visiting you. you said you would talk about it at some point. really compact for sure. I like it.
It’s coming up. I have no idea what the order of videos is at this point. I have about 4 filmed, but not edited. 2 that I need to film. Yikes!
never enough time. I don't see how some people put out a video every day. I am retired and would not have the time lol. well good deal. it was great seeing you also last Saturday. take care.
Nice vid once again John! Those look pretty badass! I also dig that she is rolling the #tabperformance BAM Stick exhaust that are made right here in my
hometown of Lincoln, NE! Thanks again for the awesome content!!
Great vid once again. When did you change bars on your bike????? Is there a vid???
There will be a video!
Those lights look sick.
So I guess I missed a video somewhere along the way but, I see you upgraded the handle bars.
Nah, you didn’t miss it. It’s coming, promise!
John, I like how Ciro’s Lights and Filler Panels look. I already follow Ciro on Facebook and Instagram. I just started following you on Instagram on Sunday Night, I found you on Shadetree Surgeon’s Page. I may have blown up your notifications. My icon is different but same dog.
Have a question if you by the products there do they charge for the install or at least possibly discount the labor?
Hi there, if you visit us at the Daytona International Speedway there is an installation charge but it's really competitively priced! If there's a specific product you want to know the installation charge of, please email azura@ciro3d.com
@@ciro3d_goldstrike3d Thanks for the info!
I just bought the side lights for the RGS for the front.
Looks like a Cylon! Great addition
Did you get a chance to check out that ASR seat? What do you think?
It’s awesome. If only they made one for softails...
and THEY ARE SOOOOOO BRIGHT !!!
Her bike is awesome!
You should come down to Gator Harley in Leesburg FL.. you're already at Daytona and all back roads lead to Gator.. ask for Bronx
I’m home now!
@@TheHarleyTech come down for Leesburg bike festival March 24 to the 28th we will have tons of vendors. TAB just dropped off their stuff today
I know John likes where he lives and works, but I bet some dealer out there would give their right arm to have a tech/mechanic with a following like his, to work at their service department. If he lived here in Orlando, I'd break down and buy a Harley knowing he's a mechanic at a local dealer. Not to say that the local techs are bad, but one dealer I know of in particular could use a boost in reputation points.
John very cool vlog Ciro. Be Cool and Ride Safe.
I love my cruise control! Great video! Thanks man.
Cool to see this one up so quick. Great getting to say hi on Saturday. Wish I had known more about the ciro products before I went my light setup... but always the next bike right?
So like the idea just didn’t know if there was a plug in play permenant type of bracket like the Cairo and not stick on. Please let me know
Very cool. What about Road King (not Special)?
Was down there on Sunday looking for ya, but no John was around.
Good stuff! You make it look so easy peasy! You da man!
Be safe down there
And have fun!
Those bars look good. Looking for some bars for my ‘19 Street Glide myself
Let’s say you have a code that popped up. How do you clear it? Also how do you put a bike into transport mode and take it back out of that feature?
Mind if I ask why you chose the Heritage instead of a new M8 bagger? Seems like it would be an even better choice for what you do.
The new Softail frame is just as smooth as the baggers, but about 200 pounds lighter. Mine is an 18, and the 114 baggers weren’t out until 19. That’s the quick reason.
Great video, as always. Are you and Ciro going to be at Ocean City/DelMarVa Bike Week this year? I've been filling out the back end of my 18 FLHTK lighting with HD parts to make it look more complete. But, Ciro really has my attention for the front end extra lighting.
I need a set of those lights to add to the other stuff I got from them.
Whut up!! Is there any chance you can do a video about the difference between the standard primary cover vs the narrow cover on the M8? And how’s the Heritage feeling?🤙
Curiosity has got me by watching the installation where it is plugged in I have a luggage rack on my 2019 FLTRXS with the extra light that installs underneath that I installed. Will that be an issue or is this set up to add in along side
Hey john you gonna be at Ciro tomorrow ? I was there getting a new Mustang seat at destination Daytona and totally missed ya!
Whoops never mind! Just seen the dates from the Instagram posts lol
Nice job looks good on those baggers
John I hate to ask this on a video promoting Ciro lights but I'm looking to get the filler panels for my Ultra Limited but can't decide between Ciro and Custom Dynamics. I love the look of Ciro's product but they don't look very bright compared to the Custom Dynamics. Can't find any side by side comparisons online and figured you have probably seen both. Are they that way in person? Thanks
Looks like your rockin some new bars on the Heritage, video would be cool
Naturally it’s coming, because of the giveaway, I needed this one out first!
I love you videos brother. I just have one question. I see you wear sunglasses in some of your videos, and i need to know how do you get them not to fog up in the helmet?
They do depending on weather.
@@TheHarleyTech Is there anything i can use to make them not fog up at all?
John will you be heading up north to Americade/Laconia this year?
Hi John. Really enjoy your vid's, very informative and funny too! Wondering if you could point me in the right direction. I'm looking for the stock tank emblems for my 1992 FXRS-SP . Had a dent removed and tank repainted but am having no luck finding the emblems. Would like to keep the bike lookin' stock as possible. If you have any suggestions as to who to contact It would be greatly appreciated. Tried J&P Cycles but noda. Thxs and keep them vid's comin'!
Bars look good. How do you like the road thunder speaker kit?
Can you have just the center and lids? And forgo the fillers?
what if you purchased the filler panel with lights and you are also using some custom dynamics products.
Did I miss a handlebar install video?
I have been on vacation bike week and key west so kinda catching up on videos?
Nah, I went out of order. Just to confuse some folks!
John Maxwell yea I went back and checked I haven't missed any of you videos! I had a blast at Daytona but only could stay one day had reservations in key west!
The Ciro3D filler panel lights I installed on my 2017 Ultra Classic used stainless steel bolts and locknuts instead of double-sided tape. I thought a Street Glide would be the same. What's the difference?
Your ultra has a “hole” in the rear fender support bracket. The street glide has a decorative painted part.
@@TheHarleyTech Interesting. I wonder why they are different? Thanks for the reply.
How about some cool lights for 18 and newer Heritage?
That looks awesome..
Missed last month, hoping I win this one! I really need something to plug those holes on my 18 Ultra Limited.
You are funny to us viewers, as well. Your audio is crisp af.
Those the new bars on the Heritage? They look sick!
Thanks man! Just watched your new release, loving the content! You running Carlini’s, too?
I wish man. Have the Todd’s Cycle 1 1/2 inch diameter Strip Apes.
Sick looking bike good job
Nice look, considering look for my vivid black RGS....... nice job
My husband would like you to do a front wheel bearing R&R video! Thanks from Windsor,Ontario Canada!
Sweet video man!
You'll soon be on a 100k subs 👍😎
You’ve been here since the beginning!
@@TheHarleyTech cos it's a great channel
Ciro need you to come to cavalier this is great rally to.
I’m surprised it’s double sided tape that is used.. isn’t there a concern over time that it will come loose of disconnect?
The only double sided tape I’ve seen that’s come apart (when installed correctly) is on a bike that got thrown from a shed during a tornado a few weeks ago. It’s pretty strong stuff!
@@TheHarleyTech Does it require a new paint touch up or the clear coat if you have to remove them say the lights start going out due to a defect? Also, did they mention anything about making their current road king version a little cleaner looking like this set?
Looks like you have a Bluetooth speaker set up on your new bars. Can you supply some info about it.
Soon. I got a lot of new stuff at once! I’ll have videos on all of it!
I'll see Ciro at Americade!
Did you put new bars on the heritage. Was there a video I missed.
You didn’t miss it. Just haven’t edited it yet.
@@TheHarleyTech Nice. I'm glad I haven't missed it. They look good, looking forward to seeing it. RFTC.
Ok so your light burns out or fails and its pass there year warranty.
How do you fix without pulling the paint off your bike with that sticky tape?
FYI at the end of the video when you say there’s another video here and here nothing shows up
Ciro3D and you Sir John should and are welcome to come to #PendletonBikeWeek and have fun!!!!
Is Ciro going to make products for different bike brands? I like their style but of course they don’t make anything for my bike.
Sweet setup!!!!!
BIG DIRTY !! ROCKIN DAYTONA !!