Ciro LED Saddlebag Hinge Covers Install and Review
HTML-код
- Опубликовано: 23 июл 2024
- 🔵Get yours here - shrsl.com/35r8o
Follow along as I walk you through the install these LED Saddlebag Hinge Covers. This easy-to-install part replaces your original hinge covers on Harley-Davidson Touring models and also adds a bright row of side-facing Everlight Automotive Grade LEDs.
#sikbaggers # ciro3d
🔴GET SOCIALISTIC
🔗Facebook Group SIK Baggers - bit.ly/38GRKgI
🔗Instagram - bit.ly/2HwBZge
🔗My LINKTREE - linktr.ee/sikbaggers
🎵All Music Licensed Through www.epidemicsound.com
🚩The video content is available for informational and educational purposes only. Steven Housden, SIK Baggers does not make any representation or warranties with respect to the accuracy, applicability, fitness, or completeness of the video content. Steven Housden, SIK Baggers does not warrant the performance, effectiveness, or applicability of any sites listed or linked to in any video content. The information contained in the multimedia content (“Video Content”) posted represents the views and opinions of the original creators of such Video Content and does not necessarily represent the views or opinions of the Company. The mere appearance of Video Content on the Site does not constitute an endorsement by the Company or its affiliates of such Video Content.
Steven Housden/ SIK Baggers assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Any injury, damage, or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user. 
Авто/Мото
These lights are AWESOME!! Just wanted to mention. On the Ultra Limited… there are 2 black plugs under the seat. Make sure you connect the black plug that goes to the tour pak.
Those lights are awesome, I like those better than the custom Dynamics bag lights.
Thank you for your wire connection instructions. I had to drive a 9/16 whole because my connectors didnt come off. But im glad i used tape first over the hole i needed to drill and i started drilling small and worked my way up. Thanks!
Awesome job can’t wait to get my kit in
Looks like a great product. Welcome back.
Great to see you back buddy. Ciro makes some great stuff. Thanks for the video!!!
Missed you Bud!!! So glad you are back!!!
Hey Steve you're the best. Very helpful and informative. I appreciate what you do!
Thank you CD! I appreciate the kind words!! Have a Merry Christmas!! Be safe!
Just installed mine Steven and thank you again for your video on this and everything you have helped me install.
Nice! Love those inserts ...its always a little intimidating to drill holes but its a pretty easy install..glad you got them in!
Ciro has done a great job on their lighting Steve, nice install to, man that bike look's like my youngest son's 17 Street glide special, beautiful paint job, 💯
Right on, thanks man! Just bought mine, because of this video 🤘
Awesome..youll love them and not too bad to install..pretty straight forward.
good to see you back. i am not a harley guy but enjoy to watch someone who loves what he is doing and is willing to share his expertise
Thank you! Much appreciated.
Steve really great detailed video. I was looking at getting these recently. Definitely going to get them now.
Yeha these turned out great and pretty easy to install...the customer loves them!
Great video by the way!!
I like these. Great video as usual sir.
Yeah these are a nice addition....bright too! thanks for checking out the video..be safe.
Man big Fan of all your work on the Tube. Hope I Can find this for the tour pack need it for a Triglide. Great Video/
Thank you for checking it out! Glad it helped.
Thanks again for a another easy to follow video featuring Ciro3D Steve! Here's an idea that Ciro might want to consider for guys running the BAG BLADES, the MACHETE LIGHTS, and these Hinge cover LED's. Make a simple 2 into one and a 3 into one harness for guys running all these lights on the bags. Just disconnect one wire and remove the Bags! I think guys will really go for that! Just a thought from an old aircraft mech.
Hey bro..youtubes been jacked up and im just getting old comment's showing up so I apologize. But youre very welcome. Ciro actually has those already...here is a link to the splitters...there is even a 4 way splitter. shrsl.com/43a01
Awesome video in-depth as always glad to see you back brother awesome product
Thank You Brother!
You're welcome
That's nice!
Thank you for checking it out Bill!
Great vid brother always enjoy your video glad your back.
Thank you
You're welcome
Thanks for video, great job! I have the Ciro filler panels and love them. Saw once that the blades have a quick disconnect between bag and harness, but the hinge covers do not? I remove my bags for things like cleaning and tire inflation... What happens with the cord when doing that?
There is plenty of wire there to expose the plug in between your seat and your saddlebag if you wish.
Thanks!
Thank you very much for the Super Joe! Much appreciated sir. Glad the video helped!
@@sikbaggers Yes it does!
Great work,and detail how to install
Thank you Ruben!
Hey brother it's good to see you back on here doing your thing great video glad you are back god bless
Easy solution is put the wire behind the Advanblack saddlebag liners, they are awesome and just got them delivered, never had to worry about snagging your wires with you have the awesome liners. Great video again, bought a few products from Ciro3D because of you. Normally i would not try install myself but you make it easy and very helpful
love this vid man, keep up the good work, Did you notice the right rear turn signal at 16:37?
yes...took me til about 1030 that night to figure out what the issue was...chased wires for 3 hours...it was a bad tri bar light...swapped it out and boom everything worked. Good eye by the way.
Hey Steve, another great video, keeping it coming, big fan.
I have Harley saddle bag turn/brake signals, Im adding ciro lights for saddle bag latch, I’m I able to connect both with the hardware that comes from ciro, thx
Hey joe...yes of course..with LEDs you can daisy chain a ton of them together and still be fine.they have a very small draw on the system and everything should be the same connectors as HD
Steve...love your install videos...I'm one of those guys that learns 3 ways so you are super helpful. Question...I'm going to install these saddle hinge LEDs and the Machete bag LEDs...connecting the hinge and the machete connections...this is where I'll be a bit stuck...suggestions or directions for proper connections. thanks
Thak you Scoot..and sorry I missed this comment. but its really easy if you think about everything being a daisy chaion...one light to the next...all of the connectors have one female and one male so you split the main and just start adding them in until you have a complete circuit to your rear and the additional lights are all plugged in.
Love them but I need the blinking to be orange.
HEY STEVE, I installed the latch lites some time ago. but now Iam doing a Advanblack tour pac.Also Installing Reaper tail lite and ciro 3 D Crown Tail Lite Of course when I plug in the tour pac no latch lites.What other harness do I need? I did my fuel filter the other day thanks for the video on that You do Some Awesome Stuff. and this is on a 2021 street glide.
You shouldnt need any other harness..all of that should daisy chain together. do it all with the bike turned on..plug one thing in at a time and see when the lights go out
Do you guys make a wiring harness plug and play to hook up to the older models 12 and up wiring harness for a touring pack quick disconnect??? For me to remove my Taurean pack I have them for my speakers my lights radio on the CB antenna wire and then take it off and reptile wires up I want to leave the seat and then put it back on and I’ll carry damn thing back up that would be awesome
I'm not sure if this is what you're looking for but check out my buddy BlacktopDevil video on making it all quick disconnect. ruclips.net/video/nH3kzIdTAvI/видео.html
Hey brutha awesome videos. Would you happen to have a website for apparel , other than social media sites ?
Hey..im working on getting one but right now I do not...Ive got too many irons in the fire now to get it finished but im trying.
Just followed your video and installed these. Great instructions. My only issue is they are not working on my 2022 Road Glide Special. No idea what I did wrong
Hey Dorian...yeah no reason they shouldn't be working if everything is plugged in correctly. Got the wires lined up right on the clips so they match the instructions? Also make really sure that the wires are pushed in all the way and make contact when they are plugged in. Those pins are finicky to say the least.
I got in touch with Ciro. I had the dang pins in upside down so they weren't fully seated. There is a nice detailed picture of how the pins should go into the connector on there website on the product page under instructions. Ciro customer service is top notch.
@@dorianmyers7453 Yes they have some awesome tch support...not sure if you talked to Darren but he is the best and always gets me lined out! glad you got it fixed!
Will Ciro products mix with custom dynamics and to remove the bags does the seat have to be removed to access the quick disconnect.
yes they will mix just fine...and this one yeah youll have to remove the seat..but really./.its one bolt/screw...no biggie
Hey Steve, I'm new to modifying bikes. I have a basic question that I might just be overthinking, but do you have videos covering how to install multiple lights? For instance if I'm installing the Fang LED rear signal lights, the Filler panel lights and the bag blade lights, would I need splitters or would they all plug in at different places? Thanks in advance.
you would absolutely need the splitters for some and the some of them actually just daisy chain together ...depends on the light but ciro always provides what you need to get it done in the light kit
This should be the same for the kuryakyn brand as well correct? I just put them on but haven't done the electrical
Im not sure..nevr installed the kurys but Im sure it is ...simple plug and play
Hey brother I got the road glide St and the brake function doesn’t work it looks like. On the right wiring black and blue are missing the locking clips so the pins won’t push in, when i hold them in the light comes on but Only run and turn. Not sure if I can unclamp them and buy the pins at a store, do you know of anywhere I can replace those pins without contacting ciro?
Great job on this one! You must have better luck than I do with splintering paint 😁
Well I have never spliuntered it but I have scratched the shit out of paint job....when the drill bit finally went through I freaked out and pulled it out real quick with the trigger still pulled and ran the bit right down the backside of the bag...what a great day was! Fuuuuuuuuuuuuuuuuuuuuuu! LOL
I have a 2010 Electra Glide with 2014 bags on it. Would the lights work on mine?
Hi Bo, yes they will, but you will also need to order part number 40090 in order for them to work. ciro3d.com/products/machete%E2%84%A2-installation-kit-for-p-n-40155?_pos=2&_sid=892e00d92&_ss=r
@@ciro3d_goldstrike3d SIK Bagger was the inspiration for me to change my bags to the Rushmore style. Thanks for the information on the lights
Great install. Concerned there’s no seal on the wires/connector. They sit under the seat subject to the environment. I would suggest using dielectric grease on both the connector shell to connector shell and wire to connector shell side. IMHO
Yeah we put dielectric grease on all plugs...Forgot to show it..Im human..made a mistake on the editing. Most, if not all ciro electrical products come with a small pack of dielectric grease.
I have a 12 sg with 14+ bags would these work on my bike ?
The fitment is for 14 and up bikes..the wire harness will not work with the 13 down.
Great info Steve. I have to ask. What is the colour code for that bike? She's gorgeous!
Thank you cahd..its Hard Candy Hot Rod Red Flake It came out in 2017 on street glide specials
Quick question, looks like you have to remove the seat to disconnect the wiring every time you remove the saddle bags? I like to clean the rear rim every few washes. Good video.
There is plenty of wire there to expose the plug in between your seat and your saddlebag if you wish.
@@sikbaggers Got it thanks.
I have a gunship grey bike, the only colors they have that I can see is black and chrome. Are there any other options to where the lens alone can be changed and i can keep my color latches.
the oem latches on 14 and up are always color matched..there are no companies out there making color matched hinges with lights in them, at this time.
@@sikbaggers maybe I didn't use the correct word... i had stated hinges...i mean latches...I have a gunship grey saddlebag and would like to match the hinges to the same color....if they are not making that color as of yet is there an alternative. I thought I seen a video of they popping out the reflector and replacing it with a LED light.
Why didn't Ciro provide a quick disconnect at the bag like the rear saddlebag lights?
I got the enforcer replica from native so it matches my enforcer rear
Im trying to install these, but the male connector are on and won't fit thu 9/16 hole any easy way to depin? Thanks
Its a standard 4 pin connector and can be de pinned...they should have came off the wires when you got them though. here is a decent video on it, I have started at the part for that connector as he does several different ones in the video. ruclips.net/video/zArs-Td7Emo/видео.htmlsi=ym9q887DWNjoYrgZ&t=291
Where do i get wire extensions, to connect the wire underneath the seat to extend the wire to make the connection behind the saddle bag.
The kit has everything you need to install these lights
Wish ciro would've had a quick disconnect between the bags and the fender. Not under the seat. Makes it more of a bitch to remove saddle bags, when you have to remove seat and unhook the 4 pin connector.
So what if you have the Ciro bag blades? Do they sell a pigtail type deal?
Yes they have splitters..all of thier stuff has splitters or just daisy chains together...weve added numerous lights to one bike and just daisy it all together.
@@sikbaggers ok just checking cuz those bag hinges are pretty badass lol
So I have 14+ bags on my 2011 road king,so how would I wire it up ? Please help me brother
Hey jac....The lights actually fit the bags you have but the wiring will of course be different on the 13 and older bikes. First you will need a load equalizer to run LED and then the connectors would still be different. I would suggest giving Custom Dynamics a call and letting them know you have some bag lights for a 14 up and ask them what equalizer and what adapter you need to make it happen. They have a ton of adapters, I just dont know for sure which one you need off hand.
@@sikbaggers thanks man I'm gonna call them today
Steve, are you the Tech for Ciro too? I bought these lights a few months ago and just got around to installing them. Neither left or right light is working and when I check the connectors with a test light I'm getting power to both sides.
Hey William I am not, however, this has been an issue in the past with a couple of other fellas that have installed them and every time they had the wires wrong in the pins...double and triple check that you have the correct wirers in the correct holes when you pinned it under the seat.
@SIK Baggers Steve, I did double check. However, I'll do as you suggested and triple check this wknd when I can get back out to the garage.
@@Knight_Glider Good deal...its easy to mix up those pins...also if it still doesn't work...just contact Ciro Support...great group of guys over there that will get you lined out
@@sikbaggers I meant to follow up sooner but forgot. To say a great group of guys over there is an understatement. We need more customer support like they offer. Ciro 3D for the win, thanks Steve and thanks Forrest if should see this
any chance of SIK swag order dropping soon?
We will do one this fall for sure.
Okay so once these are wired, how do you take the bags off?... I like to take my bags off when I wash my bike.
The quick disconnects that are in the wires. ..just unplug them
Can these be ordered so the original keys work with them ?
Its a hinge cover...you are not replacing the locking mechanism, only the cover.
Circumstances should come up with drilled our bolts so the worse can be rn through the bolts. Then won't have to drill holes in bags
Im not sure what your saying there..
with the size of the plug and play adapter. have you ever run across room issues under the seat if you were to put all ciro's lights on the bike
Ive put 3 and 4 additional plugs under a seat before with no issues. Just stack them side by side ..there is plenty of room between the bottom of your seat and the plugs...its designed to not lay right on your wires or plugs.
@@sikbaggers cool thanks for the timely answer
Is there such a thing as too many leds on the bike. I believe I can be seen from the space station now
lol well, it's all about how YOU feel about your bike..but yeah over time Ive seen some that were pushing it ha. Have a Happy New Year!!
Damn, I have a 2013.
If you updated your bags to the 2014-up (One touch) they have the plug-in-play wiring adapter for the 2010-13
@@mattmccarthy6815 Thanks. I already have the Ciro Bag Blades so that may be a consideration.
Love the vid but am I the only one found the lighting to darn dark
It’s like a pain to take the saddlebags off
yeah its one extra step to unplug the lights.
I think your shows are grear
I refuse to watch any ciro or custom dynamics light installs on RUclips channels. Keep reviewing the same old stuff that everybody else has and get no views for me
Thanks for commenting though.
@@justanotherviewer52 LOL.....exactly what I was thinking.
Said the idiot that not only watched said video but took time to comment..
Man I wish you live next to me.
aah these arent too bad to do...I know drilling holes in plastics can be a alittle intimidating...you just gotta wind it up and send it lol