CIRO TAC-10 Light Cannons Install Road Glide
HTML-код
- Опубликовано: 23 июл 2024
- Ciro TAC-10 Light Cannons Fairing Bracket - shrsl.com/3gb4g
Ciro TAC-10 Light Cannons Crash bar Mounts - shrsl.com/3gb4m
Evil Customs Single Dash Switch - shrsl.com/3gb4j
Optional Yellow Lens Kit - shrsl.com/3gb4i
Test Light - amzn.to/3u0VM0n
In this video, I will show you how to install the @ciro3d_goldstrike3d TAC-10 light cannons on a @harleydavidson Road Glide using the crash bar mounts and install the Evil Iron switch. A full walk-through from start to finish! Super easy. A few tools and some know-how and you'll have these installed in no time!
0:00 Intro
4:17 What's In The Box?
5:44 Clamp Installation
7:48 Build Light Cannons
9:17 Install Light Cannons
9:54 Remove Outer Fairing
11:57 Install Wiring
19:11 Install Evil Iron Switch
24:54 Walk Around
25:40 Night/Road Shot
26:22 Outro/Thank You for Watching
Steve's Favorite Motorcycle Must-Have Tools!
Master Hex/Torx Set - www.amazon.com/dp/B083Q5WZHS?...
Swivel Head Ratchet - amzn.to/3MYeMEw
Milwaukee M12 Ratchet - amzn.to/3VSR6W4
M12 Battery - amzn.to/3gweokl
M12 Charger - amzn.to/3Srrb53
Ratcheting Wrenches (Metric) - amzn.to/3CQanyS
Ratcheting Wrenches (SAE) - amzn.to/3Tt6iaY
Blue Medium Loctite (Your Bikes Best Friend) - amzn.to/3gwdK6p
FT LB Torque - amzn.to/3VON5SH
IN LB Torque - amzn.to/3F4wCUA
Vise Grip Plier Set - amzn.to/3TYZUs0
Motorcycle Funnel Set - amzn.to/3sP9HFz
Belt Tension Gauge - amzn.to/3FiiXco
Noco Boost Plus Power Bank/Jumper - amzn.to/3W1squO
As an Amazon Associate, I earn a very small commission from qualifying purchases. Thank you for your support and for helping our channel grow!
#sikbaggers #harleydavidson
🔴GET SOCIALISTIC
🔗Facebook Group SIK Baggers - bit.ly/38GRKgI
🔗Instagram - bit.ly/2HwBZge
🔗My LINKTREE - linktr.ee/sikbaggers
🎵All Music is Licensed Through www.epidemicsound.com
VIDEO DISCLAIMER:
This video is for educational purposes only. By watching and engaging with this content, you acknowledge and agree to the terms outlined herein. The information presented is for general educational purposes and does not constitute professional advice or create a professional-client relationship. Any actions taken based on this information are at your own risk. Neither the creator nor the channel shall be liable for any consequences of your actions. Exercise caution, use personal judgment, and seek professional advice when necessary. The content may not be accurate, complete, or up-to-date. You are responsible for complying with all laws and regulations in your jurisdiction. By continuing to watch, you release the creator and the channel from any liability. This disclaimer applies to all future content and interactions. Confirm your agreement by proceeding to watch. 
Авто/Мото
Steve, another great vid. I’ve added 3 accessories from Ciro and used your vids as my guide for instillation. Now in a few weeks there will be a fourth. Can’t tell you how much we appreciate these vids and the time you take to do them. Thanks brother.
Thank you Andy! Im glad the videos are helping..love the ciro products..installed a lotand never been disappointed!
Awesome video. As usual your step by step makes things easier.
Thank you Ryan!
Damn you Steve. Now I’ve got to find some money to get something else you’ve shown me!! Awesome product awesome video. Great job 👍🏻
LOL thank you for checking it out Dave...Man they are bright....might even run them during the day just to get peoples attention then too
😆😅🤣😂
Great information, lights are a must in deer country. Thanks for all your guidance
Yes they are! Thank you for checking it out...be safe!
Great detailed video Steve (as usual). Ride safe from Sydney Australia 🇦🇺👍
Thank you Kevin! and you as well sir...riding season just now coming up fort us and im ready!
I have been waiting on these myself, thank you Steve 🤘🏻🤘🏻🤘🏻
Hey joe....they are briiight! You're very welcome!
This is a great video. After watching it 2-3 times i was able to install my tac 10 lights no problem
awesome..glad the video helped!
Thanks for another great video. I have been looking for fog lights for my road glide and was considering the Ciros along with a couple other brands as well as paying someone to install them. I like that the Ciros are wired under the fairing rather than running a wire to the battery and with a switch I can run the halos or the full light. Thanks to your video I was able to install them myself and I know they are done right and I saved a few bucks.
awesome! Im glad the video helped...I like having the running lights on all the time and then making the floods switchable. They are bright and a must have if you live around deer or other road critters.
Love all the ciro3d products.
yeah...love their stuff and great company to deal with.
Steve, these tac-10 light cannons are great! I'd get the optional switch for the dash so I can turn them on & off as I'd need to do. I'm looking at the Baja design IP6 10k lumens lights as well. So not wanting to ride at night on dark roads yet. Great move explaining all the pieces in the box it comes in-especially starting with the INSTRUCTIONS! Yes!👍 Doug
Thanks for checking it out Doug! Those are great lights too..very bright...I do like the switch...and the tac 10s have that halo light that I have wired to stay on all the time...so with a flip of the switch i can brighten things up...very easy and living in deer country its a must have for me!
Awesome video! Wish they would make the harnesses for older bikes. Of course I could rig these on my 05 Electra Glide with a little engineering. Hope they come out with a chrome edition!
Those are awesome! I need these when I'm riding to work on Crab Orchard refuge in the morning!! Excellent PSA about being responsible to on coming drivers! you might think you are all cool with your bright lights, the poor bastard coming at you could plow into you ! Nice job! definitely need these on the RG!
Thanks for checking it out Rodney...man I hate riding any where around that lake at night lol..not even 13...ive seen deer running straight down that highway right at cars..they are nuts lol
Very nice system👍 I need those my ultra limited
Super bright...kind of pricey but if you price anything that is comparable they are in the right price range. And they are VisionX...a leading LED manufacturer
Put them on my Street Glide about 4 months ago and they are great.
Very nice! Did you do the batwing mounts or the crash bar?
@@sikbaggers Batwing
I know a lot of folks want sound to let folks know we are here, but I thourghly believe lights are the best way to keep folks from turning in front of you. Really nice lights. Hopefully they come in chrome.
I agree with you 1000% I dont think they have chrome yet..but we will see.
Sweet lights 🤟
Super bright! Thanks for checking them out!
Love all your videos. They are very informative. I just have a question about the Harley freewheeler 2021. Just wondering if there's an easier way to wire engine guard fog lamps or is there a company you can recommend that might have a wiring harness for that particular bike. We really appreciate all your videos👍🤙
Hey thanks for that,..Im sorry I havent looked into the fog lamps for a freehweeler or seen a plug and play harness for that...I would have to do some research for that but im positive there will be something out there by now.
Great video as usual but those things are gigantic. I have custom dynamic fog lights and they are small and BRIGHT!
yeah they are Cannons for sure. Alittle bigger than I expected but all the same...super bright.
Very cool 👍
Thank you hector!
If these come with crash bar mounts, will I be able to use them on my 09 SG? I ask because you said they are for 14 and up models. Thanks.
I used your video to help answer a few questions I ran into while installing my own Ciro light cannons. Great video and thank you. Any reason why my Check Engine light now appears after installing my lights??
Glad the video helped. Could have been anything. Clear your DTC codes and see if it comes back on. A check engine light means you have a code. Watch my video on how to check and clear DTC codes. ruclips.net/video/ZV8xONzYsTU/видео.html
On the streetglide you mentioned it can go on the crash bar if you have lowers. However, what if you have highway pegs in that area that was pictured. is there enough wire to mount those lower the highway pegs can stay as well has having the cannons?
yes i squeezed mine in...if your highway pegs go straight out from the bar it may be a problem if they come back to you alittle bit youll have plenty of room.
Not really a product i need or want but still a great video. I never ride at night, its not the deer i worry about, its the idiots on their phones.
Agreed...We dont ride much at night but this sure will help...hell run them during the day too lol maybe it will grab their attention! lol
Installed per video. Don’t have the cannon lights spliced into the high beam wire yet. When I turn on the ignition to activate the Halo’s off the accessory plug, the Halo’s flash in sync like hazard lights. Any suggestions?
Looks good. Do you have info about those highway pegs? I really need those
The pegs are baddad 900 series. www.baddad.com/products/part/81016
Steve I have a Bad Dad 1 1/2" crash bar. Will those mounts work on them or do they make them? I'd definitely like to add these to my crash bars. Let me know. Thank you
The clamps wont work but there are other clamps that will work on the market...you would just have to replace those.
What brand are the floor boards?
hey steve where did you get your HD bar/shield logo on the road glide gas tank?
Detroit Choppers had the best bar and shields on the market...give them a call..they are not listed on the website, tell em steve from sik baggers youtube sent you. Super cool dude. detroit-choppers.com/
Off subject question....where did you get your windshield? Great video....thanks.
Its a klock werks sport flare
Great video. Just checked their site. maybe I can skip a house payment to order a set
Yep..they are proud of them
brotha I need you to enlighten me I need your experience can you tell me how to do it so that when I turn on my road glide the front lights do not turn on so that only the small rooms that are in the center turn on and so I can drive it without the main light and I can turn it on at will my main lights whenever i want
Im not sure exactly what you are wanting to do..im sorry i read it a few times and im confused.
Any work around with a lower fairing.. besides removing it
Shouldnt have to remove it..I showed in the video where it fits with the lower fairings. You do mean on the crash bar mounted style right?
Steve, quick question. So if you wire the lights directly to the high beams then there is no need for the switch correct? Now if you want to have the flexibility of when they are on then the switch is needed?
yes you are correct sir
Does anyone know if these will work for a 2013 st glide with the plug and play?
14 and up for plug and play
500 bucks for light seems aggressive to me I’m sure they work great but there not cheap awesome install video
Typical led headlight for a bike is normally 450 and up so its on point price wise unfortunately
Thank you...and yes agreed they are pricey but they are right around the same price as the other top cannon style lights on the market for bikes.
Great video Steve. But dang $550 bucks!!!
Yes sir...pretty much on price point though with all of the other brands on the market. I agree, expensive but well worth it for me.
i see that new gas cap...what one is that Steve?? LOL
ha just a cheapo from amazon...they have them in chrome or black for about 15 bucks. I got one for the SG in chrome too
Bad Ass thanks for the info
Thank you for checking it out!
Surprise! '14 and up. Grrrrrrrrrrrrrr.
Should be able to work around that pretty easy
Wiring to the high beams, does the halo come on with the other lights or also/just with the high beams?
the halo is the first thing we connected and it goes to the aux port at the top..the halos stay on all the time. Key on/halo
Why would my halos flash in sync, with the cadence of a turn signal? I have the wire harness plugged into the accessory plug as directed and the ignition switch on.
What do these light cannons do to my battery and charging capabilities ? Thank you
they are LED so very little current draw..There isnt any issues with the battery or charging..I run them all the time
Why do I need an app on my phone to run some of the Ciro lights .? As a rule I don't add apps to my phone.
Well there goes the tax refund 🙄 🤣🤣
Great video!!
😂😅 Thank you joel!
What turn signals are on you faring?
Covington customs..here is the link to revzilla www.revzilla.com/motorcycle/covingtons-dimpled-front-turn-signals-for-harley-road-glide-2015-2017?gad_source=1&gclid=Cj0KCQjwqdqvBhCPARIsANrmZhMWSXeMi1CGOY6u6cnMLmqjbjgh74DsmFV6pPb0fLOkRtXeXEU6H10aAlKqEALw_wcB
Wut kinda headlights are u running on that bike??🔥
Advanblack Attack Headlight amzn.to/4cQMDvc
I think these cannons would look better color matching to one’s bike… I don’t like the big black look, unless maybe my bike was predominately black. It just looks too industrial for a bike, like something I bought from Home Depot. But I must say, I love Ciro3D, love the quality of how well they light up the night, love the headlight, the taillights and turn signal… these Tac 10 Cannons look like yard lights, IMO. Lol.
I agree they are big...im guessing for the amount of light they put out they have to be...I would like to see a more slim line version but I'm afar they wouldn't put out as much light.
I T-boned a full grown bobcat on a 2006 Suzuki 805cc boulevard
ouch!! That dosnt sound fun at all
Do you know if there is enough room if you have lowers?
so they can be mounted with lowers, obviously not where I mounted them but you can flip them over and run them on the outside of the bar on the bottom of on the side.
@@sikbaggers Thanks so much for the info. Is there any other brand you would recommend for the maximum lighting possible.
👍👍👍Bad Ass. GREAT VIDEO
Thank you JC!
Will these fit on a Road King Special?
Fits ‘14-up touring models
Street Glide FLHX
Street Glide Special FLHXS
Street Glide ST FLHXST
‘19-up Electra Glide Standard FLHT
@@sikbaggers thanks for getting back to me. Unfortunately, I learned the hard way and ordered them. I have to rewire or send them back.
Great video. Have you ever had to replace the inner fairing bolt housings (brass with threading)? Could you show how to do that by chance? Thanks
I have and it was a pain in the YEP! If I get another one in here busted ill make a video of it...What usually happens is the plastic gets weak or stripped and then the brass comes out...so just buying a new brass never works...if you cross thread the brass, then yes please buy another one...but sticking it in an already weak or stripped hole never works. What I do is add some super glue to the hole...but you really need to make sure that its straight when you press it in. That always works!
@@sikbaggers thank you so much. Next time I've got the fairing off, I'll give that a shot
You're going to get me divorced with all these videos. If I buy any more stuff for my bike my wife is gonna knife me in my sleep... That being said, I really want these!😂
HAHA....I feel you man...these are nice though..might be worth taking a poke or two lol
👍💯
Thanks for checking it out mr.g!
Nice video on how to install, but those things are expensive and the switch is another $80. I like them but not right now.
Yes they are pretty pricey but they are on point with the others on the market at this time.
👍
Thanks for checking kit out Darren!
$549.99 Man that's a HD price.. great Vid tho bro ty
Unfortunately if you look at any cannon-style lights that are worth a hoot on the internet these are marked in the same price range as the others. Thank you for checking it out though SD...much appreciated
Great lights but... for the money I would rather go with the Ciro Attack head lamp. It gives you the same perspective, cost about the same and half the install work. That's just me though.
The Attack headlamp if from Advanbalck. I'm assuming that is the one you meant? Thats the one I have on this bike that I installed the tac 10 lights on...and youre right..the attack headlight is super bright, not to mention just mean looking.
@@sikbaggers so which ones brighter attack headlamp from Advant or tac 10’s
@@reybruny Were comparing apples to oranges here...ones a headlight and one is aux lights..they dont shine in the same spot...both are bright as shit but both do a different job that's why I run both.
We have deer and Javalina, a pig like animal that is dark and low to ground. They will dart out in front of you.
I have literally never heard of those and I just googled them...holy hell..that would be a nightmare..they are fast!
@@sikbaggers The reason I don't like to ride at night.
These lights are $800 Canadian. That’s before taxes and shipping. 😢
yes they are a bit pricey but if you check the other lights on the market designed like these they are pretty well in the same price range...still sucks though
Why would want to compress my suspension during transport? Sorry sir, you so make no sense when talking about tie down points.
Who said anything about transport? I said tie it down. Tie it down to a jack, tie it down to a lift table etc. I personally use a biker bar so I have no use for them...however if you ever have to tow a bike in apinch and you don't have a wheel chock you probably better pull that suspension down a little.
way overpriced.
compare them to any reputable light company and the light output and Vision X is on point on price.