Always a pleasure watching you work man. There are so many that don’t know what the f they are doing. I wish I could live close by to do some great stuff on my @turborolla
Okay so being an absolute newbie in engine work. All I ever do is oil changesm sparks and brakes, shocks etc. What is needed to be done to go turbo? As in, do I need to drill any holes etc? Aside from the turbo, the exhaust manifold and piping, what more would i need to do for my 98 N/A?
@@MattBerrymotorsport Would fuel pump and injectors only be needed after going for more power? I'm mainly looking for something to give it a bit more punch, doesn't have to be CRAZY fast lol still need some fuel economy for college and work. So basically all I need is the turbo kit and an ECU to begin with?
@@2Skills4u I haven't pushed stock injectors so I don't have an answer for that. But yeah you can definitely do a budget low boost combo with the stock injectors and fuel pump
@@MattBerrymotorsport Okay thank you :) I'll definetely be looking into going this route. I've been watching your channel for a few weeks now since I get my starlet after my celica's engine blew up lol. Quite impressive how you managed to strip down the engine in 7 minutes
Not fond of that dump pipe, have seen the waste gate flap hit and also not able to flow enough to control boost. Would have been better with the first option
I won't have any of those to do for a while, but Watch this one ruclips.net/video/LagVe5ZpvYw/видео.html And then this one ruclips.net/video/-hnxccA5lJA/видео.html
THIS TURBO KIT IS FOR SALE, post a comment for more details HERE is the first test drive ruclips.net/video/_ODLATFej48/видео.html if you want to see how I build that exhaust manifold be sure to click on this link below ruclips.net/video/TKYBpphp2xA/видео.html
Ebay. But if its cheap, don't expect it to last and then you risk blowing up your engine. If you want to save money, buy something factory of an oem car and fit it. Atleast then there is a good chance it was made in Japan and good quality
Yeah direct bolt on. This actual kit is for sale (second hand) comes with turbo, oil lines, manifold and dump pipe for $1200 add 300 if you want the rest of the exhaust too. Has mandrel bends and a hot dog muffler. Manifolds by them selves are custom made to order $1000
@@haleemmohammed1267 that's a great combo you have there, in my opinion you should change the turbo if you want 350 hp. Tdo4 will never do it. Im using a gtx 2867 on 28psi to make 383 hp. If you want the cheaper turbo option get a gt 3071
Man I've got three NA Toyota Starlet EP91 4E-FE 1.3L Manual Green/Dark Blue & Factory White Parked At Home in Sydney That i Would Love To Bring Into Your Shop To Get a Turbo Set-up Like That Sigh 😩🙏
You really are at the top of your game mate! I turbocharged a Sigma years ago, but have never attempted a Starlet, if I do I know who I'll be paying.
Haha thanks Pete. A turbo sigma would have been great!!!
Looks good. Why did you opt for a TD05 and not a TD04 ? Wouldn't it be laggy as F ?
Hay Matt. Whats the cost for trubo set up?
That’s a nice clean up set up bro do you sell the turbo manifolds to California 😃 I really want my 5efe turbocharged
Hey do you sell the turbo kit for that engine.
Always a pleasure watching you work man. There are so many that don’t know what the f they are doing. I wish I could live close by to do some great stuff on my @turborolla
so does the oil feed and drain have the same port, and the other 2 are for water cooling?
Looks good. Still looking forward to the 5e going in. Which paint did you use? Will it last ?
Its a ceramic paint, surprisingly good.
Okay so being an absolute newbie in engine work. All I ever do is oil changesm sparks and brakes, shocks etc. What is needed to be done to go turbo? As in, do I need to drill any holes etc? Aside from the turbo, the exhaust manifold and piping, what more would i need to do for my 98 N/A?
Aftermarket ecu at the absolute minimum. You will need injectors and a fuel pump soon after
@@MattBerrymotorsport Would fuel pump and injectors only be needed after going for more power? I'm mainly looking for something to give it a bit more punch, doesn't have to be CRAZY fast lol still need some fuel economy for college and work.
So basically all I need is the turbo kit and an ECU to begin with?
@@2Skills4u I haven't pushed stock injectors so I don't have an answer for that. But yeah you can definitely do a budget low boost combo with the stock injectors and fuel pump
@@MattBerrymotorsport Okay thank you :) I'll definetely be looking into going this route. I've been watching your channel for a few weeks now since I get my starlet after my celica's engine blew up lol. Quite impressive how you managed to strip down the engine in 7 minutes
Hey, Just wanting to know if Glanza body part conversion are allowed in Australia?
1.3 gear box?
clean af
Where did you get the high mount manifold from mate. I can only seem to get the low mount one
We made it
@@MattBerrymotorsport fair enough, I ended up just doing the same. Couldn't find any decent high mounts
Not fond of that dump pipe, have seen the waste gate flap hit and also not able to flow enough to control boost. Would have been better with the first option
Already checked. It opens wider than the diameter of the hole
Nice 👍 work Matt
Oh man I would love to install ac in my project, but ac blower unit for my car is just not obtainable for reasonable money :/
Where are you taking the oil feed from since u removed the oil filter relocator ? A "T" in the oil switch port ?
Thats correct, sorry I forgot to put that part in lol
@@MattBerrymotorsport ok thanks mate. Keep up the good work. Your videos motivates me to push through with my project.
God that looks sick! 😍
that setup is clean as :)
That's matt work always clean
Can you please do a full head gasket replacement video on a 4efte mines blown and there’s no good videos on how to do it
I won't have any of those to do for a while, but Watch this one ruclips.net/video/LagVe5ZpvYw/видео.html
And then this one ruclips.net/video/-hnxccA5lJA/видео.html
Any questions let me know
Matt Berry what size is the bore in a 4efte in an ep82
@@Yungltd you will need to pull the head off and measure it. 99% of the time you will need the 74.5mm gasket
Matt Berry ecu are you using on your cars to push more power
i need one of these made
Don't wanna sell the fte oil filter relocator you removed?
sorry mate already gone
ive been told you can buy them brand new from toyota for $120
Hai mat if I change block 5e.. what turbo should I used tod4 or tdo5? From brunei 🇧🇳
My still using 1.3
Td05 is better for both engines
guide me im starting to upgreed my 4efte stock comming im put my 4efte at my Hyundai atos
bro that manifold bolts on on 5efe?
Yea
What turbo manifold is that top mount?
Yeah custom campdog manifold
a great thank you boss, I learned many things from your RUclips channels, love you mate
THIS TURBO KIT IS FOR SALE, post a comment for more details
HERE is the first test drive ruclips.net/video/_ODLATFej48/видео.html
if you want to see how I build that exhaust manifold be sure to click on this link below
ruclips.net/video/TKYBpphp2xA/видео.html
where can i get a cheap internal adjustable wastegate?
Ebay. But if its cheap, don't expect it to last and then you risk blowing up your engine.
If you want to save money, buy something factory of an oem car and fit it. Atleast then there is a good chance it was made in Japan and good quality
Do you sell the kits and would it be a direct bolt onto the 4efte ?
Yeah direct bolt on. This actual kit is for sale (second hand) comes with turbo, oil lines, manifold and dump pipe for $1200 add 300 if you want the rest of the exhaust too. Has mandrel bends and a hot dog muffler.
Manifolds by them selves are custom made to order $1000
@@MattBerrymotorsport Has the kit sold? Are you able to build a kit still?
@@cordi82 This kit sold sorry. Not taking anymore orders atm, keep an eye on the channel, ill let everyone know when im making more 🙂
@@MattBerrymotorsport Hey mate, is this car just running a stock 4efe manual gearbox? What model turbosmart fuel regulator is on it?
Matt how much power the Gt make with the 4e all motor
Will try it on dyno soon timbo
Cant want to see the power it rev happy
Hey. I from Trinidad in the West Indies. I have an EP91. I would like to contact you for some performance advice on it. How can I get in contact you?
Best way to contact me on on here, that way your question may help others :)
@@MattBerrymotorsport cool. i recently bought it and got a lot of aftermarket parts installed. I would like to carry it to around 350hp safely
forged scat rods & wiseco Pistons, Race Engineering Titanium springs & retainers, 460CC injectors, Td04l turbo, magnecor kv85 comp ignition kit, Aeromotive A1000 GII Fuel regulator, Turbo smart external waste gate, uk custom mild steel manifold, decat down pipe, OBX mega flow intake.
Turbo smart 2 stage digi boost controller, Fully harnessed Greddy E-manage Blue, WalBro 255 lph fuel fump, Aeromotive A1000 g II, AutoMeter Boost, RpM, Wideband, Oil pressure guages, SPEC stage 2+ clutch kit
This is the parts installed and currently doing just above 200hp.
@@haleemmohammed1267 that's a great combo you have there, in my opinion you should change the turbo if you want 350 hp. Tdo4 will never do it. Im using a gtx 2867 on 28psi to make 383 hp. If you want the cheaper turbo option get a gt 3071
@@MattBerrymotorsport Thanks for the info.
🤤💥
4efte or 5efte?
5efte, big block ;)
first!
Man I've got three NA Toyota Starlet EP91 4E-FE 1.3L Manual Green/Dark Blue & Factory White Parked At Home in Sydney That i Would Love To Bring Into Your Shop To Get a Turbo Set-up Like That Sigh 😩🙏