How to Make Full Wrap Waterslide Decals for a Ceramic Mug | Water Slide on Dollar Tree Mug

Поделиться
HTML-код
  • Опубликовано: 23 авг 2024
  • Thank you all for supporting my channel!
    Please subscribe to my blog channel: / @patriceelle
    Like us on Facebook: / craftablethings
    Follow us on Instagram: / craftablethings
    Used in this tutorial:
    Waterslide Decal Paper: amzn.to/36gZV4C
    Mugs: Dollar Tree
    Silicon Brushes: amzn.to/2G8UyK6
    Clear Acrylic Sealer: amzn.to/3u2oufi
    Affiliate Links:
    **I have used all items listed below and only recommend products that have been successful for me. I do receive a commission when you purchase from these links.**
    CRICUT PRODUCTS
    Cricut Access - shrsl.com/2vu1a
    Cricut Joy - shrsl.com/2vu13
    Cricut Explore Air 2 - shrsl.com/2vu1p
    Cricut Maker - shrsl.com/2vu1o
    Cricut Mug Press - shrsl.com/2vu1j
    Butcher Paper - amzn.to/3dCmVwO
    Heat Resistant Tape - amzn.to/3k9vqBM
    Sublimation Paper: amzn.to/3bo4NYy
    Oven Thermometer - amzn.to/39j1vD2
    Heat Gun - amzn.to/3ntC470
    Painter's Tape - amzn.to/3bZioG5
    Designs/Images/Fonts
    Creative Fabrica - www.creativefa...
    Design Bundles - designbundles....
    #waterslide #coffeemug #customization

Комментарии • 97

  • @peajayjones8636
    @peajayjones8636 3 года назад +14

    They are very nicee. Next time use Plasti-dip glossifier with the acrylic sealer for your water slides, so you can manipulate the water slide better without tearing it. I use it a lot and it makes a difference when doing waterslides. You would spray 2 to 3 coats each letting each dry 30mins between sprays.

    • @CraftableThings
      @CraftableThings  3 года назад +4

      Thanks Peajay! I had to pin this to the top!!! Thanks for the super helpful tips!

    • @peajayjones8636
      @peajayjones8636 3 года назад

      @@CraftableThings You're welcome.

    • @sirrahinct471
      @sirrahinct471 3 года назад +1

      Peajay Jones , so do you use the plasti-dip first let it dry 30 min , then apply the acrylic sealer let dry the few minutes, then repeat 1 to 2 times more? Can you still put in the oven? TUIA

    • @peajayjones8636
      @peajayjones8636 3 года назад +3

      @@sirrahinct471 I apply the acrylic sealer first two times let it dry 30 mins in between sprays. Then I apply the plastic dip. I may do that 1 or two times. I let each spray dry before applying another coat.

    • @sirrahinct471
      @sirrahinct471 3 года назад

      Thanks Peajay!

  • @theiasalise2187
    @theiasalise2187 3 года назад +2

    The second application seemed much easier to manipulate. Love the finish product!! 👏

  • @bonitamichy
    @bonitamichy 3 года назад +2

    Yes! Bling it out. And put your makeup brushes 🥰🥰 I love the way they look. Awesome sauce 😉

    • @CraftableThings
      @CraftableThings  3 года назад +1

      Yesssss! Thanks, Michelle! I hadn’t even thought of putting my makeup brushes in them. Perfect!!!

    • @khaleesi324
      @khaleesi324 3 года назад

      @@CraftableThings morning what are the care instructions once applied. Thanks in advance 🥰

  • @lilgiantdesign
    @lilgiantdesign 3 года назад +1

    Thanks for the tutorial, Its the only video I've seen that is short but really detailed on explaining how to apply. I would not of thought to mirror the image for a easier application, thanks again so much help!!!

    • @CraftableThings
      @CraftableThings  3 года назад

      Thank you so much. I appreciate the feedback.

  • @CherryBlawesome
    @CherryBlawesome 3 года назад +2

    This looks so fun! I may have to buy some water slide paper now - haha! Thanks for keeping this video real. Your mistakes help all of us! ❤️

    • @CraftableThings
      @CraftableThings  3 года назад +1

      Thank you for watching! Sometimes the mistakes are more helpful ☺️

  • @latenightcraftingwithstace3009
    @latenightcraftingwithstace3009 3 года назад +1

    This video was right on time I am working on a waterslide project right now.

  • @FourCornersCustomProducts-4CCP
    @FourCornersCustomProducts-4CCP 3 года назад +2

    Awesome video...
    Mobile, Alabama

  • @leighaparker8798
    @leighaparker8798 3 года назад +1

    I think they turned out beautifully! Another great craft! Thanks for sharing your ideas and wisdom! I love to listen to your tips & tricks! ♡♡

  • @becomingdryork2919
    @becomingdryork2919 3 года назад +1

    Brilliant idea 2nd time. Great outcome

  • @marleymarley1360
    @marleymarley1360 3 года назад +9

    Hello, thank you for the video. After many misfires I find that it is better to mirror the image and manipulate the image face down on the cup.

  • @dorena98
    @dorena98 3 года назад +1

    Very nice! I am sooo glad you did this video. I had purchased a bunch of mugs over the summer (really cheap) from a craft co. going out of business and they've been boxed up chillin in the basement ever since. Started working on other things and forgot about it lol.

  • @AWINningCombination
    @AWINningCombination 3 года назад +1

    Great video! 💗 I’ve never tried waterslide. I’ll be honest it intimidates me, but this was a great step by step!

    • @CraftableThings
      @CraftableThings  3 года назад

      Hey girl!!! Thanks, as always! ❤️ You can do it!

  • @Reneekelley68
    @Reneekelley68 3 года назад +2

    Another good one

  • @theiasalise2187
    @theiasalise2187 3 года назад

    Nice job!!! Love your sweater. Lol

  • @TheBestUni
    @TheBestUni 3 года назад +1

    Beautiful thank you

  • @srdesigneredition6407
    @srdesigneredition6407 3 года назад +1

    Nice sis ! Thank you for this video.

  • @jtsbeauty4117
    @jtsbeauty4117 3 года назад +2

    I am new to your channel and love your content. Also the 1st comment yay!

  • @neer.7292
    @neer.7292 3 года назад +1

    Love it

  • @sheronwalker7882
    @sheronwalker7882 3 года назад +1

    Thank you

  • @Omarghasmane
    @Omarghasmane 3 года назад +1

    very very nicee

  • @meshacristafaro2863
    @meshacristafaro2863 3 года назад +1

    Nice

  • @ltconyers78
    @ltconyers78 3 года назад

    Hi. Enjoyed your video. I know you said you can't do sublimation in your home oven. There are a few videos on RUclips where people are sublimating tumblers and mugs in their home oven. You just need a special silicone wrap for the mug or tumbler made for the oven sublimation. They come out very nice.

    • @CraftableThings
      @CraftableThings  3 года назад

      Thank you so much for watching! I use a dedicated convection oven for it. I know of people who use their home ovens. I do not recommend it. It might be fine. However, if I don't do it, I'm not going to suggest it.

    • @buddysmith7080
      @buddysmith7080 3 года назад

      It has nothingto do with the wrap. Sublimation ink turns to a gas. Once you use an oven for sublimation you cannot use it again for food because the gases are toxic.

  • @leighaparker8798
    @leighaparker8798 3 года назад +1

    Hey girlllllll ♡♡♡♡

  • @TheBestUni
    @TheBestUni 3 года назад +1

    😱❤️❤️

  • @louisejacob9552
    @louisejacob9552 3 года назад +1

    How long do you leave in oven and at what temperature? TIA

  • @latenightcraftingwithstace3009
    @latenightcraftingwithstace3009 3 года назад +1

    Hey girl

  • @larrywilliams9290
    @larrywilliams9290 3 года назад +1

    Hey butterfly, after drying in the oven do you apply another coat of acrylic spray and are they dishwasher safe? thx.

    • @CraftableThings
      @CraftableThings  3 года назад

      Hey!!! I'm sure it wouldn't hurt. I usually don't, though. I should. 😁 It's not dishwasher safe.

  • @MsJetme
    @MsJetme 3 года назад +1

    These cups are so pretty can I sublimate on the waterslide paper

    • @CraftableThings
      @CraftableThings  3 года назад +1

      Thank you! I haven't subbed onto waterslide paper before.

    • @MsJetme
      @MsJetme 3 года назад

      Can you make a video about it 😊

  • @melissiam6242
    @melissiam6242 2 года назад +1

    How long did you put them in the oven and at what temperature?

  • @SharoninKentucky
    @SharoninKentucky 3 года назад

    Love your mugs. Questions? As far as the second mug, do you have to spray with sealer on second mug? Does the second mug decal last longer?

    • @CraftableThings
      @CraftableThings  3 года назад

      Hi Sharon! Yes, I used the sealer on both. Both methods hold up the same after curing.

  • @normazaharioudakis115
    @normazaharioudakis115 2 года назад

    Are you allowed to sell those if you sign up to get that design? Thank you loved that mug

    • @CraftableThings
      @CraftableThings  2 года назад

      I wouldn’t sell these or any product with the Chanel logo on it. Thanks for watching!

  • @silviagarza8328
    @silviagarza8328 3 года назад

    Nice work. When you bake it, do you use your sublimation oven or is it ok to use your regular oven?

    • @CraftableThings
      @CraftableThings  3 года назад +2

      I used my sub oven. However, I have used my regular oven for waterslide.

  • @TheDwilliams1000
    @TheDwilliams1000 2 года назад

    How do you get the size of a full wrap? Did you design that full wrap template

  • @jordanlotus188
    @jordanlotus188 2 года назад

    Hey ! Nice job and work. is it waterproof after dry?

  • @yeseniamnz11
    @yeseniamnz11 3 года назад

    Hello, instead of an oven do you know if they can be done in a mug press ?

  • @janaylabreaux3507
    @janaylabreaux3507 3 года назад

    Hi! I do sublimation on phone cases, so what can I do when my prints have colored dots all over the print. I feel like I've tried everything; I've cleaned the printer, did all of the maintenance and nothing seems to be working. do you have any recommendations?

    • @CraftableThings
      @CraftableThings  3 года назад

      How long have you had the printer? If you have performed print head alignments and printhead cleanings and nothing is working, I'd contact the manufacturer.

    • @janaylabreaux3507
      @janaylabreaux3507 3 года назад

      @@CraftableThings i’ve only had it for about a month or two. i use the ET-2720 and i got it from office max

  • @tashmieremoore1695
    @tashmieremoore1695 3 года назад +1

    Where did you make/find that template for the cut

    • @CraftableThings
      @CraftableThings  3 года назад

      What’s your email? I put it together. I’ll send to you.

    • @jackievetterart6414
      @jackievetterart6414 2 года назад

      @@CraftableThings could you send it to me too? Also can I make this in canva? When you save it do you save as transparent or pdf?

    • @sheilahein5540
      @sheilahein5540 2 года назад

      @craftaablethings.. can you please send me the template for the dollar tree mug as well. thank you so much

    • @joycecrutcher2883
      @joycecrutcher2883 2 года назад

      @@CraftableThings will you send me the template for cup wrap? Thanks

    • @AinuOki
      @AinuOki 2 года назад

      @@CraftableThings , can you tell me where I can find the template?

  • @suzycruz2995
    @suzycruz2995 3 года назад

    can the image be seal with epoxy ? thanks :)

  • @type2cafe166
    @type2cafe166 2 года назад

    So I did waterslide on some shot glasses and put them in the oven. When I washed them after using the waterslide came off… what do you do to keep them on

  • @andresaprater8107
    @andresaprater8107 3 года назад

    Where did you get the template from and do you have the templates for tumblers?

    • @CraftableThings
      @CraftableThings  3 года назад

      I made the template for these particular mugs. It might be in the description. I have templates for tumblers that I use. Some vary in size.

    • @andresaprater8107
      @andresaprater8107 3 года назад

      No I didn’t see it in the description

    • @CraftableThings
      @CraftableThings  3 года назад

      @@andresaprater8107 Mug Template: drive.google.com/file/d/1VWo7JZMPtvWnN1mqT3NX7R0zQy2AUGUN/view?usp=sharing

  • @Gtate13
    @Gtate13 3 года назад +1

    Hello

  • @sialee5926
    @sialee5926 2 года назад

    Do u sell these?

    • @CraftableThings
      @CraftableThings  2 года назад

      No, I do not.

    • @zeboriashort2874
      @zeboriashort2874 2 года назад

      @@CraftableThings you need to sell some of your products, with all the information and your time you do for free we wouldn’t mind to buy your products you made.

  • @juanitatamborine2075
    @juanitatamborine2075 3 года назад

    Why did you bake it?

  • @Craftybowladychannel
    @Craftybowladychannel 2 года назад

    Could you help me with the template for this dollar tree mug?

    • @CraftableThings
      @CraftableThings  2 года назад

      What is your question or concern?

    • @Craftybowladychannel
      @Craftybowladychannel 2 года назад

      @@CraftableThings how to make a diagram template for the dollar tree mug

    • @Craftybowladychannel
      @Craftybowladychannel 2 года назад

      Yes please I have done the straight tumbler but never did a mug yet