Это видео недоступно.
Сожалеем об этом.
Aligning Accidental Trcuk Front Axle Beam || Straighten Bent Front Axle Beam of Truck
HTML-код
- Опубликовано: 25 дек 2021
- Accidental Trcuk Front Axle Beam and Replacing King Pins Bush in Local Workshop
#repairingbrokenfrontaxlebeam #howtorepairbrokenwheelaxle #rebuildingtruckfrontaxle
This is very primitive ,but you work with what you have available to you at the time . God Bless them and keep them safe .
Подшипник без смазки забивают молотком, красавцы.
I guess only about 3/4 of the bushings are really needed. If you crack them don’t worry. The same for the bearings. Crushed races don’t hinder movement. I guess I have been lied to for years.
The guy in the blue clothing must be the father or the boss. Holding his new Iphone while watching the child doing the hard work...
I like this video 👍👍👍
Indonesian audience 🙏🙏🙏
Did you see that kid just about jump out of his skin when that guy pushed that axle off the cart? 🤣🤣🤣🤣 That's a lot of hard work. Especially by hand. Impressive.
Гнутый электрод решает все косяки.
i like the workshoes they wearing .Safety first .
Yeah that dirt is definitely going to keep them hammer marks to a minimum.. 😂🤣😂🤣
They was using the dirt/dust to look for cracks on the spindle, in most of the world we use magnetic flux to test for that. 😊
дети не учатся, образование не получают, вот оно сословное общество.
Малобюджетный сериал по вселенной безумного Макса…
Highest works safety i ever seen🤣
Have to love the dirt floors and no working tables
What is this obsession on wanting things to be on tables or benches! More people have hurt themselves and equipment broken when something falls off a bench onto the floor or someones toes than something that never get gets raised off the floor, in the first place!
If all of the parts changers, sorry, mechanics in my shop were required to repair this axle, they would all quit and I would have 6 workman’s compensation claims the following morning. Tough job
thats the way..hammer in bearings..nothing could go wrong
I wonder why they beat the pins in, when there's a hydraulic press there?
I don’t know for sure but i can only assume that they don’t want to 1. allign that axle underneath the press and 2. overstress the joints.. because they’re weaker than the rest of the axle and can’t take the constant stress of a hydraulic press or else they would bend/break if there was too much friction or the axle wasn’t alligned perfectly vertically under the press.. bare in mind that a Hammer not only provides pressure but vibrations too, which reduce friction by micro-wiggling the pin in.
It's the same reason they don't use power feed on the lathe in such videos. They never learned it properly how to do the jobs, they watch other guys do it. It probably didn't even occur to them they could do it with the press
@@christiannoble5549 dude, just because they're piss poor doesn't mean they are cavemen.. They're some of the most crafty people out there.. Not to mention that they use the press on the exact same part during the same process so it can't just "not occur to them"
They probably don't press it because of sticky friction or 'sticktion'.. Hammering it causes less sticktion which transfers less stress from the pin to the part..
It's like pulling a paper under an upside down bottle.. If you do it fast enough the bottle doesn't drag or tip over and the paper is pulled cleanly from underneath. Because the fast movement cancels sticktion and most of friction, and the vibrations help too..
Now they probably won't be able to explain it scientifically to you but I'm sure they'd be familiar with the concept.
@@ukpkmkk_2 Nah mate, I did 100s of such joints. A press does it in one continous motion, hammering it causes it to get cought in the bronze bearing sometimes and takes much more effort...
@@christiannoble5549
When you are pushed for time and used to doing things by feel you often don't bother with power feed. Of course they know how to use it.
maybe boots are too hot to wear or expensive, but i can't get over how they dont use safety glasses, i've been hit with chips from a mushroomed punch head and they can easily put an eye out!
that poor kid got the shit scared out if him when the axle fell on the floor neer his feet, where are the steel toe sandals.
that kid can come to work for me anytime...
21:02
Got me there I thought it was red hot haha
Пацану экзамен что ли устроили. Правда, помогали в тяжёлых и ответственных работах.
Seen this about 20 times. Lets see something else! Thanks
ахххх...еть.лопни мои глаза,так разве можно...им -да.
Легко 😃
Да уж
Super Arbeiter super Video . Wenn ich heute in Europa diese "Smartphones-Zombies" auf der Strasse herum laufen sehe , wird mir übel wenn ich ihre kleine Hände anschaue mit den sie noch einmal in ihrem Leben Arbeiten sollten .
Shaik hussain main Axel Bending
good job
ruclips.net/video/_GafIdiNGtY/видео.html
2:58 is that meant to be a crack test? 7:14 good grief!
Well aren't you sophisticated? They use what they have and repair what we would throw away.
@@metricstormtrooper Hell yeah Greggy,. you tell'um ,..just do a half ass repair job, it'll be fine ...metal fatigue, ? wore out ?.. whats that ? 'oh,. and throw them goofy looking safety glass' away and who needs steel toed boots ,..hog wash.... your an idiot
No steel toe work boots...well maybe one pair somewhere.
I think the young lad is showing off because the cameras on him...."hey look at me, I can do a mans job"!
interesting to see how it is done enjoyed watching
The two guys alway watching in clean clothes are the shop slave owners?
grape !
Even when this young boy insists on doing Man's work he should be held back because of injury. He will damage his young body and then not be good in his 30's. He is too young.
Also should be encouraged to focus on school studies but unfortunately that's the system in Pakistan/India. The people are brought up in poverty and are often left with no choice but to start working at early age
В песке веселее разбирать
India Andhra Pradesh Vijayawada auto nagar road
После сидения на корточках у них геморрой не вылазит?
Так ониж работают, вылазит у эхспердов.
Лайк. Молодцы.
Leyland
👍🙏🤝PARABÉNS.
Ótimo 👍 serviço
Rio de Janeiro/Brasil. 25.12.21
Que o eterno abençoe todos nós hoje e sempre 🙏
Geraldo Rocho.
Main axle Bhind Nahin chakkar the
Какие корявочники,ужас.Желание заработать,обмануть есть а ума нет совсем.
Child labour, what child labour?
There you go again Greggy ,....what's that ? we don't care about no stinking child labor law,....
Bacche ki mehnat nahi dekhenge . Magar child labour ka inzaam daaldengey .
Walk out in the street and fill the potholes.
YOU can handle fixing that problem.
Stop slapping bandages on the symptoms that won't last.
I am calling Shinanigans!!!
Yes, let individuals do for charity what would cost millions of dollars and would probably solve the problem only partially. Not only that but also stop doing what brings food on the table for them.. well aren’t you a prize.
@@ukpkmkk_2 ....Being paid for half-assed repairs like this one only puts MORE people in danger.
You may have a social arguement, but I have a technical one.
I have been trained how to properly repair motor vehicles and know that this is NOT A REPAIR.
The axle will snap again a few miles down the road.
@@truthsRsung it's not only 'social'.. It's everything too.. Financial, legal, technical and most importantly logical..
This way I can suggest a cure for cancer and a way to explore the universe and end world hunger.. Like "just isolate the cancerous DNA in the cells and make it self-destructive" and "just invent a ship that travels the speed of light or faster" and "just breed crops that can grow in deserts"
But every reasonable human being knows that these arguments are worth jacksh!t.
@@ukpkmkk_2 ....Do you forgive me for being critical of this video?
I don't disagree with anything else you have said.
I do take offense for your personal attack on me.
@@truthsRsung I didn't attack you personally.. However it's the preposterous way of viewing the world that needed to be taken on harshly.. Not to mention that these views came from someone calling himself "prove me wrong" and when proven wrong he gets personally offended.
maybe boots are too hot to wear or expensive, but i can't get over how they dont use safety glasses, i've been hit with chips from a mushroomed punch head and they can easily put an eye out!