I'd recommend not putting it off. Even if you just get a little johnboat cheap off craigslist, it'll get you on the water. Then you can sell it later on and get one closer to your dream boat. Once you start using it, you will have a better idea what you like/don't like and what you want to do with the boat.
didn't even know how to use a saw was desperate to replace my boat cushions and after watching your video i was able to replace all my boat cushions! Thank you
Great job . I just wanted to add a tip for you in a friendly way . When you cut and used a new piece of plywood, you should of painted it first a couple coats of exterior paint. That will protect it and help it last alot longer before it gets wet and rotten like the old pieces you removed. Just thought id share.
*This was very helpful. I used your technique on the vinyl. The end result was amazing. Just wanted to say thanks for taking the time to make and upload this video. In my search of how to redo the vinyl, I found your video and it was perfect to help me redo the seat cushions, myself. *
Great video, I was thinking of selling my boat for another one with a better interior, not anymore, I can't wait to redesign mine! Thank you for this video!!!😀👍🏾💯💯💯
Next time make sure that your foam extends past your wood backing board by 1/2" all the way around for a more professional job (your legs will not come in contact with the board). Additionally, round all of your corners and foam corners. Also you should wrap your foam in silk cloth to help protect it from water.
Great job, looks really professional. an upholsterer gave me a good tip for any outdoor stuff. give any wood or ply a good wrapping in cling film beforehand.
One of the best videos for simple reupholstering boat seats I've seen...I'm about to start a project pontoon boat with good bones and motor, but roached upholstery on the furniture. Thanks!
Same here. I am just going to get some bolts with a flat head and drill holes through the plywood, stick the plywood up to the fiberglass, mark the new holes and stick the bolts through before I wrap them. Then stick the whole thing on and put locking washer and nut on the bolt from inside. Luckily I can get inside my hull fairly easy.
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
Hi, by doing a little sewing and creating a "box" with the vinyl, you could have left the adjoining corners at full height (as opposed to tapered) and it would have looked like a sectional. Also, it is good to cover the foam with plastic to prevent moisture penetration from the top. I agree with other comments that painting the wood, especially since it is not likely marine quality would be a very good idea. I cover the back of the boards with a mesh material. It looks nice when people take the seats off to get access but still allows it to breathe or let out any moisture that has got in. All in all though, the end result was very nice and a big improvement to your boat.
Yes there are many other things I could've done to make this project even better, but I did a quick DIY seat recover with materials that I had quick and easy access to. Thanks for your suggestions.
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
Boat came out amazing man! You just encouraged me to redo mine! Now I have a question for you. For the sides what thickness foam did you use? I want to order the stuff now so just want to make sure I order the correct stuff thanks for the awesome video man
I believe I ordered 4” thick foam but there are different thicknesses and different stiffnesses. You’ll have to find out which one best fits your application.
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
@@vtecbanger3180 I've noticed this same question was asked quite a few times in the comments on this guys video, and he dodged pretty much every single time someone asked it lol
@@enamstarwalker I’m in the automotive field and we do interior stuff too. I’m also creative and think ahead. That being said I’m still at the drawing board
I used the existing curved brackets mounted on the boat and cut square holes in the wood for it to slide down on. Almost like a french cleat but with a metal bracket and a hole in the plywood.
Good recommendations. I used what I had quick access too. There are metal brackets that are angled and I cut square holes to match up to the brackets and it slides right down onto the brackets.
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
I didn't attach the bottom seats to the boat. They just sit on the base. I used the existing brackets to mount the seat backs. I cut a square hole in the wood and the bracket was screwed to the boat and angled up. I slide the seat back down onto the bracket until it bottomed out.
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
I found a local place that sells 4 ft. X 12 ft. sheets of 1/2 inch PVC . That's what I'm going to try on my boat . It will never rot . The sheets were only 30.00 each .
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
You have the exact same boat I do (Sunbird) mine is a 1996 Fish & Ski. I am wanting to do this exact same thing to mine. Do you have any videos of how you did the back boards? How did you cut out the square holes where they mount? Also, as others have commented, how much vinyl did you order for this project? What thickness foam did you use 3inch or 4 inch? Please reply brother. Thank you.
CoCo BiZoU I never got a reply from him so I just did it myself. All I did was pull it tight and staple. At the corners it took a couple tries to get the creases looking good but I finally got it.
excellent video. I was getting quoted anywhere from 250-400 for two small seat pads that have no stitching on them. After ordering everything(I already had the stapler), I am spending less than $100. Thanks for the inspiration. Where did you get that cutter from and how much did you pay?
I used just regular T50 staples which probably isn't the best staples to use, but it was a quick DIY so I wasn't too worried about it. I believe they make stainless steel upolstery staples that would be better to use.
Claudia Villa I purchased the foam and the vinyl off of Amazon. There’s a link in the description that will bring you to the products that I used in this video.
@@slickfixjeff Sounds like a good idea, maybe the *only* idea,thanks for bringing it up; The boat sat uncovered outside for some 12 years before i got it last year, and some of the wood in the seats is also rotted on the bottom of the backrest and on the seat itself, so i'll have to reproduce some of the panels too, it's gonna take a while; thankfully,the (seat) boxes are sound; the floor panel over the aluminumtank i replaced already At least,the engine and drive i did already, like new now,(i am a mechanic-cars and some boats too, for 25 years); and then i sold them both,installed them in the customer's boat,and took his pair as core,to make like new again; but in the meantime i installed a 1992Turbo Diesel Iveco 2.5 TD engine, all checked out,will use the same Alpha 1 Drive; it already ran for a few hours,on land,to check temps and vibrations,noises,gauges,tach ( signal comes fron the Alt.AC) etc; need now to take it to the water to check things out, adjust power (very easy to adjust the fuelling,it's a mechanical pump),turbo PSIs, prop pitch, EGTs,etc.
Seat backs were mounted using the existing brackets that were on the boat already. Bottoms weren't fastened at all so that I can access the compartments underneath with ease.
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
Just saved this video. I’m definitely going to do this to my boat.... whenever I get one. A man can dream
A man have to dream, Im sure you will get one.
I'd recommend not putting it off. Even if you just get a little johnboat cheap off craigslist, it'll get you on the water. Then you can sell it later on and get one closer to your dream boat. Once you start using it, you will have a better idea what you like/don't like and what you want to do with the boat.
didn't even know how to use a saw was desperate to replace my boat cushions and after watching your video i was able to replace all my boat cushions! Thank you
Do all seats have plywood
Great job .
I just wanted to add a tip for you in a friendly way .
When you cut and used a new piece of plywood, you should of painted it first a couple coats of exterior paint. That will protect it and help it last alot longer before it gets wet and rotten like the old pieces you removed.
Just thought id share.
Absolutely or buy marine treated wood. Paint would be a bit cheaper.
Heck the plywood I used has been sitting out in the weather for 10 years and is still good. CDX
Oh my, that boat hasn't been covered and taken care of. This was a pretty quick and inexpensive fix and will last a couple years so great job.
good job I would suggest painting the wood on both sides totally with Red Guard then the wood would outlast the cushions.
Yea i will definitely do that next time. This was a quick fix to get my boat back in the water
*This was very helpful. I used your technique on the vinyl. The end result was amazing. Just wanted to say thanks for taking the time to make and upload this video. In my search of how to redo the vinyl, I found your video and it was perfect to help me redo the seat cushions, myself. *
Dude!!! The video I’ve been trying to find for years! New subscriber earned!
Great video, I was thinking of selling my boat for another one with a better interior, not anymore, I can't wait to redesign mine! Thank you for this video!!!😀👍🏾💯💯💯
Next time make sure that your foam extends past your wood backing board by 1/2" all the way around for a more professional job (your legs will not come in contact with the board). Additionally, round all of your corners and foam corners. Also you should wrap your foam in silk cloth to help protect it from water.
Do you have any recommendations for videos that show the best way to do this?
Excellent tips
Awesome, my project starts soon. This has been very informative and I’m sure I’ll be back again. Thanks!!
Great job, looks really professional. an upholsterer gave me a good tip for any outdoor stuff. give any wood or ply a good wrapping in cling film beforehand.
You’ll see that sometimes when you redo vinyl. The OG will have the wood and foam wrapped in Saran Wrap essentially. Then the vinyl stapled over that
Amazing! This is exactly what i was looking for and what i will do with my boat
One of the best videos for simple reupholstering boat seats I've seen...I'm about to start a project pontoon boat with good bones and motor, but roached upholstery on the furniture. Thanks!
Started mine yesterday. Today I will cut the vinyl and staple it. More to come soon but great video.
This is awesome. Looking to do this exact same thing to our old boat - the cushions are solid, but the vinyl looks awful. Thanks so much for this!
Very nice, but I really wanted to see how you attached the vertical pieces to the boat.
Same here. I am just going to get some bolts with a flat head and drill holes through the plywood, stick the plywood up to the fiberglass, mark the new holes and stick the bolts through before I wrap them. Then stick the whole thing on and put locking washer and nut on the bolt from inside. Luckily I can get inside my hull fairly easy.
I think I am going to have to make a video showing how they are attached.
Also how did you attach the seats as well
Yep Dude! Just thanks you for your video ! You give to me some courage for finish to restore my boat. 🤙🏽
Love the bread knife getting some work.
I'm looking at a pontoon that will need, at least, the vinyl repaired. Looks like a project right up my alley.
Awesome, awesome, awesome job man!!! Looks really good.
Looks great. I think the only thing I would have done is prime the wood to make it lat longer. Great video
Doing this now on a flipper boat. Great tips
Brother thanks for this video. I am going to follow it and do this today for our 1977 sailboat we bought.
Top job! Nice boat👍🏻
That’s a beautiful boat! I bet it’s the perfect set up!
um what about the bottom wood exposed part? Do you want to do something with that?
Nice video and thanks for the detailed instruction. Well done.
Just what I was looking for. Thank you.
thanks for a very easy, simple video DIY video
I am about to replace the vinyl on my 2000 bayliner cushions. It's only part of a huge restoration on this neglected boat. thanks for sharing.
Thanks for watching!
Great video, I would look for Stainless Steel staples, coat the wood will also help it last and be careful of the thickness of the wood. Looks great.
Great job man!!
So what keeps a the seat on the boat?
How did you keep the seats in place?
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
Well done!
👍🤩Great job. Inspirational. Thank you. 🙏💝
Great job!!!
Thank you!!
How did the cushions hold up in the rain? Does the material soak the water?
No its vinyl so water just beads up and runs off.
How does it lounge? >>>>
This was a amazing video! Thank you! Boat looks so sick now!
Big difference!
Hi, by doing a little sewing and creating a "box" with the vinyl, you could have left the adjoining corners at full height (as opposed to tapered) and it would have looked like a sectional. Also, it is good to cover the foam with plastic to prevent moisture penetration from the top. I agree with other comments that painting the wood, especially since it is not likely marine quality would be a very good idea. I cover the back of the boards with a mesh material. It looks nice when people take the seats off to get access but still allows it to breathe or let out any moisture that has got in. All in all though, the end result was very nice and a big improvement to your boat.
Yes there are many other things I could've done to make this project even better, but I did a quick DIY seat recover with materials that I had quick and easy access to. Thanks for your suggestions.
How do you attach the upholstered back. We need to do that.
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
Looks great, seriously thinking about doing mine.
You should. It was actually easier than I expected it to be.
@@TheAverageJoe24 I'm about to order my vinyl and will let you know how it goes.
Good luck, hope it goes well!
@@TheAverageJoe24 how expensive is the vinyl?
@@splash5974 I've found it from$7.99 to $30 a yard.
This video will be very helpful but I do have a question ow many yards of fabric material and foam did you buy?
Looks good. What size of plywood did you use? And how did you fasten the cushion on? Otherwisethey blow away. Enjoyed your video.
Nice. Is it okay that I’m not cool enough to have a wood trailer? Also is a bread cutter the same as a bread knife?
Yes Bread cutter/Bread knife
Just curious how u rigged up your back cushions to stay on. Having trouble figuring out a good way to get my to stay
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
Awesome DIY, thank you so much for posting!!
Hey what method did you use to attached the floating cushions?
awesome DIY video. thank you
How did u screw it to the boat. I don't see any screws or anything
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
How does it lay? I've asked that question many times, many times....
Boat came out amazing man! You just encouraged me to redo mine! Now I have a question for you. For the sides what thickness foam did you use? I want to order the stuff now so just want to make sure I order the correct stuff thanks for the awesome video man
I believe I ordered 4” thick foam but there are different thicknesses and different stiffnesses. You’ll have to find out which one best fits your application.
I clicked on the amazon link you porivrd for the foam but they have different sizes. Which one did you order it ?
I used the 4in I believe.
Bro this video is fire !! Wow thanks
How the hell am I supposed to do screw the side cushioning on after I've wrapped it ?? Glue it on ??
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
Awesome video!
Why did you stop making videos?!
Life got busy, I bought our family business, had kids, etc. BUT I am back to making more videos!!! and responding to the comments on my videos!! Haha
Is there black mold in that wood?
How did you hang the back rest?
I was wondering the same thing
@@enamstarwalker I’m still wondering. I think on mine I’m going to put speakers that light up so I can look like a floating strip club
@@vtecbanger3180 I've noticed this same question was asked quite a few times in the comments on this guys video, and he dodged pretty much every single time someone asked it lol
@@enamstarwalker I’m in the automotive field and we do interior stuff too. I’m also creative and think ahead. That being said I’m still at the drawing board
He said he used Velcro...
How did you attach the vertical pillows to the wall of the boat?
Velcro
I used the existing curved brackets mounted on the boat and cut square holes in the wood for it to slide down on. Almost like a french cleat but with a metal bracket and a hole in the plywood.
Great video keep them coming !!!
How thick was the foam ?
Nice job.
3 or 4 in
@@TheAverageJoe24thank you
Thanks for the video! Question. How do you attach to the boat?
I Would recommend marine vinyl and stainless staples 🌞
Good recommendations. I used what I had quick access too. There are metal brackets that are angled and I cut square holes to match up to the brackets and it slides right down onto the brackets.
You did a great job 👌
But how did the panels attach to the boat???
How do you install the side panels without visible screws?
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
How do you remove the old seat? Are they glued into place?
No they had a hinge, but I removed the hinge so that I could access the compartment underneath easier.
And how did you attach them to the boat
I didn't attach the bottom seats to the boat. They just sit on the base. I used the existing brackets to mount the seat backs. I cut a square hole in the wood and the bracket was screwed to the boat and angled up. I slide the seat back down onto the bracket until it bottomed out.
What about the backs?
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
HI there, how did you attach the cushions to the wall? mounting tape or screw from the back? Thanks
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
How did you get the ones in the wall
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
I found a local place that sells 4 ft. X 12 ft. sheets of 1/2 inch PVC . That's what I'm going to try on my boat . It will never rot . The sheets were only 30.00 each .
Yea using plastic backing instead of wood is a great addition to the longevity of the seats.
how did you attached it all to the boat?
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
Ok, i'm inspired now.
What are the clips that hold the backrest
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
How did you attach the side cushion?
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
How to you tight the side "seats"
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
How thick of foam did you use?
3in and 4 in
Nice job I am a boat junkie too
You have the exact same boat I do (Sunbird) mine is a 1996 Fish & Ski. I am wanting to do this exact same thing to mine. Do you have any videos of how you did the back boards? How did you cut out the square holes where they mount? Also, as others have commented, how much vinyl did you order for this project? What thickness foam did you use 3inch or 4 inch? Please reply brother. Thank you.
I would like to no also about how you did the back boards please
CoCo BiZoU I never got a reply from him so I just did it myself. All I did was pull it tight and staple. At the corners it took a couple tries to get the creases looking good but I finally got it.
I used the existing brackets that are mounted on the boat and just cut square holes in the plywood.
How many yards of the vinyl did you buy/use?
10yards and it was more than enough.
awesome, thanks!
excellent video. I was getting quoted anywhere from 250-400 for two small seat pads that have no stitching on them. After ordering everything(I already had the stapler), I am spending less than $100. Thanks for the inspiration. Where did you get that cutter from and how much did you pay?
How did you remove the back of the seat that is just hanging there?
Never got your answer. I hate channels that don’t respond to questions on their posts. I just asked again let’s see if it gets answered. 😂
Hey, my question is... what kind of staples did you use? I have my boat on salt water and dont wanna get them rust off.
Thx
I used just regular T50 staples which probably isn't the best staples to use, but it was a quick DIY so I wasn't too worried about it. I believe they make stainless steel upolstery staples that would be better to use.
I just recently retrimmed a speed boat and I can tell you that they stink when you take the old seat cover
How thick was the foam?
4 inch foam.
how much vinyl did you use
I ordered 10 yards and it was more than enough.
Were did u purchase the foam ?
Claudia Villa I purchased the foam and the vinyl off of Amazon. There’s a link in the description that will bring you to the products that I used in this video.
Awesome job! u saved about $1500
Great Video; but i have a 1987 19 ft Sea Ray seville CC with back to back seats and those are really bad; it's a lot of work.
I have the same boat...just take them off the track and lay flat, then you can work from there. I did mine last year, very easy.
@@slickfixjeff Sounds like a good idea, maybe the *only* idea,thanks for bringing it up;
The boat sat uncovered outside for some 12 years before i got it last year, and some of the wood in the seats is also rotted on the bottom of the backrest and on the seat itself, so i'll have to reproduce some of the panels too, it's gonna take a while; thankfully,the (seat) boxes are sound; the floor panel over the aluminumtank i replaced already
At least,the engine and drive i did already, like new now,(i am a mechanic-cars and some boats too, for 25 years); and then i sold them both,installed them in the customer's boat,and took his pair as core,to make like new again; but in the meantime i installed a 1992Turbo Diesel Iveco 2.5 TD engine, all checked out,will use the same Alpha 1 Drive; it already ran for a few hours,on land,to check temps and vibrations,noises,gauges,tach ( signal comes fron the Alt.AC) etc; need now to take it to the water to check things out, adjust power (very easy to adjust the fuelling,it's a mechanical pump),turbo PSIs, prop pitch, EGTs,etc.
Didn't say how backs were mounted, or bottoms fastened
Seat backs were mounted using the existing brackets that were on the boat already. Bottoms weren't fastened at all so that I can access the compartments underneath with ease.
Great video 👍
@Donny Dez Thanks!!
You didn't explain how to do the back seats 🤔🤔🤔
You can see in the video that the boat has small metal brackets down the side of the boat where the cushion back goes. I cut small square holes to match up with the brackets and when I mount it, It slides right down onto the brackets.
No marine ply?
Sir you have vacant position for this job?
What was the cushions size you use
I used 4in foam.
Can you please come fix my boat 😭 I’m a veterinarian student with no time and no money hahaha
An electric knife works good for the foam.
Wow
After watching this video of me and my girlfriend are going to redo our boat tonight
@Absolute Rideshare that’s awesome!! That’s the whole point of my channel!! Inspiring people to be a DIYer!!
What else you doing tonight?