You can use a heat gun or hair dryer to mold the vinyl to remove the creases more on the bottom or corners as needed. Cut creases on the bottom and adjust staples. Treated plywood, or fiberglassed wood, even better, stainless staples, too.
IMPORTANT! Do NOT use regular staples! They will rust and make a MESS!!! ONLY use stain steel staples and use many more than you see here. Also, fold the vinyl with hospital corners so the folds facing down so they do not scoop water into the cushions.
Awesome video! Thanks for sharing! This was a great educational video for newbies like myself who savvy ourselves as DIYers! I am a new boat (Whaly 500R) and new outboard engine (2021 15HP Honda) owner as in the last 2.5wks and still in the pre launch checklist phase before my first outing with the family. Anyway that aside, I love the cushion tutorial. I have gotten several great ideas thanks to your simple implementation of velcro strips to hold cushions in place. Since my boat is brand new and made of polyethylene I don't want to put any holes in it but want to upgrade features as best I can independently. Thanks to this video I know exactly how I will create additional cushions and seating options on board before my first outing. Great simple videos like yours are everything to people like me. Thanks again and best of luck with your ventures as well! Have a great day!
That’s awesome to hear! Just make sure you get some super strong Velcro, I always make sure to secure the cushions while trailering because of the wind. Looking back at it I do think using rivets would of been a much better option! Have fun, and good luck with the new boat.😎
Amazon, I’ll post the link for you. VViViD White Weatherproof Faux Leather Finish Marine Vinyl Fabric (5ft x 54") www.amazon.com/dp/B01NBK44BI/ref=cm_sw_r_cp_api_glt_fabc_Z19DPXP85ZJ9T4T2J5FJ?_encoding=UTF8&psc=1
The correct way is sewing a vertical piece to the top piece. Then wrap it to the board after you heated the vinyl so it could stretch nicely. Use stainless staples and 3/4 in apart.
Quick question, what thickness plywood did you use and does it seem to work well? Working on my 1972 Deck Boat and trying to save some money. Upholstery shop wants roughly 3k for all I need done.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
You can use a heat gun or hair dryer to mold the vinyl to remove the creases more on the bottom or corners as needed. Cut creases on the bottom and adjust staples. Treated plywood, or fiberglassed wood, even better, stainless staples, too.
Great tips!
I like the little image you drew on the plywood for ppl who don't know what port and starboard are😆👍🏻
Thanks
IMPORTANT! Do NOT use regular staples! They will rust and make a MESS!!! ONLY use stain steel staples and use many more than you see here. Also, fold the vinyl with hospital corners so the folds facing down so they do not scoop water into the cushions.
Horrible job,,, corners are not right
@@cherylekutzer7521 Remember that the point of this was to recover the cushions without having to do any sewing.
@@blaster-zy7xx Thanks
What foam did you use? Thickness of plywood? And looks like not treated if using acrylic? Thanks
Can you upload the link for the cushioning and vinyl? Thank you!
1st link is the foam I used for cushioning, and the 2nd is the vinyl I used
a.co/d/cjtQW5u
a.co/d/4JEp9VR
Good video! Velcro and form are not in your links in description any chance of knowing where foam came from?
Amazon I gave somebody else the link in the comments!
Do you have a link for the velcro
a.co/d/17l68hT
Whats the best foam to use and where to get it?
This is what I used
a.co/d/cjtQW5u
Great job and Cute Pup!
Double thanks!
Great video. Love your driveway.
Thanks!
Awesome video! Thanks for sharing! This was a great educational video for newbies like myself who savvy ourselves as DIYers! I am a new boat (Whaly 500R) and new outboard engine (2021 15HP Honda) owner as in the last 2.5wks and still in the pre launch checklist phase before my first outing with the family. Anyway that aside, I love the cushion tutorial. I have gotten several great ideas thanks to your simple implementation of velcro strips to hold cushions in place. Since my boat is brand new and made of polyethylene I don't want to put any holes in it but want to upgrade features as best I can independently. Thanks to this video I know exactly how I will create additional cushions and seating options on board before my first outing. Great simple videos like yours are everything to people like me. Thanks again and best of luck with your ventures as well! Have a great day!
That’s awesome to hear! Just make sure you get some super strong Velcro, I always make sure to secure the cushions while trailering because of the wind. Looking back at it I do think using rivets would of been a much better option! Have fun, and good luck with the new boat.😎
Where did you get the foam from? Thickness? Is it thick enough for comfort?
Very comfortable, the link should be in description. Amazon purchase
@@AnchorDownBoat It's not.
@@rickodean7238 2 inch high density foam
Where did you get the vinyl from?
Amazon, I’ll post the link for you.
VViViD White Weatherproof Faux Leather Finish Marine Vinyl Fabric (5ft x 54") www.amazon.com/dp/B01NBK44BI/ref=cm_sw_r_cp_api_glt_fabc_Z19DPXP85ZJ9T4T2J5FJ?_encoding=UTF8&psc=1
Enjoyed viewing
Thanks
Thanks for a great video! I made 3 cushions for my 2000 hurricane fundeck.
Thanks for watching
The correct way is sewing a vertical piece to the top piece. Then wrap it to the board after you heated the vinyl so it could stretch nicely. Use stainless staples and 3/4 in apart.
Thanks for the advice!
Quick question, what thickness plywood did you use and does it seem to work well? Working on my 1972 Deck Boat and trying to save some money. Upholstery shop wants roughly 3k for all I need done.
Killed it
I think they came out great for first time making cushions!💯🎉
How did the Velcro work out? Did you use Velcro in the bow area too? Did you use an industrial grade?
It worked great, and it was just heavy duty velcro.
@@AnchorDownBoat I used the industrial strength and it’s perfect. Your boat looks great!
@@leesire awesome, and thanks 🙏
What about the back pieces? Did they ever fly off? 😬
nope
I have a 93 version of that boat it looks like nothing changed except the color
Sometimes I like to look at the new sea pro boats to see how far they have come now haha!
So crazy.... I have almost the same boat.
Small world! 🌎
Great looking dog, what is she?
She’s a mix between a pitbull, and a boxer! Her name is Tank, and She’s as sweet as she looks!💯😁
Make a cushion to go over the ice box , will make that a nice lounge area
That’s the plans!😁
Let’s do some wakeboarding behind it
Someday!
I did my motor bike cussion when i was 15, must say, i fitted it better with the cornera.. There just leave a dumb corner.. So noupp for me
😮
🐠☀️🏝️
it's not well made, there are a lot of creases
I assume it all fell apart by now. Doing things halfass is just halfassed.
Still holding strong my friend
the most terrible upholstery which I ever seen
Learn how to sew. It’s not hard.
😂 looks like sh..😂
Thanks