I've got a 99. No egr. 12.7. 80k on rebuild. Got 1.7 out of original. They like to rev. Oil at 10k with Lucas. Paper logs. With fuel way up in price and freight down 30 to 50% I am still making bank. Don't know how these guys are making money with e logs .
Beg 2 differ, I have a 12.7 60 series & a N14 Cummings, the N14 is a much motor. The Detroit is better on fuel but the N14 is much stronger. Luv them both tho
I get 4/5mpg with a van doing 80 and 6 doing 65. 140k on rebuild. I do 55 up parleys and sisters at 75k. I am worried about over working it. 500hp and 1550 Tourqe
Yes was the best engine for its run from about 2008 to 2015 years and the epa started killing the diesel engines with controls that the manufacturer could not handle then .thanks. Glenn
Have a 14L in a 2007 Columbia has been been doing great. Pre emissions. Have done some work around it. Though I think is the problem of the set up from the previous owner. It has earned its place and glad to have it. Hoping to get some more good use out of it before have to work inside the engine like this.
Hey! Do you think it’s a good idea getting a 06 frieighliner Columbia 14l with almost a million miles ? EGR motor NOT ball gear. Never overhauled for $40k
@@shonzyjay1221 you need to look at overall mechanical and cosmetic conditions. How does it run? Check wires, hoses, belts, fluids and so forth. Are there any codes? Are their maintaince records? How is the interior? Body? This truck I got years ago and accepted the flaws. Fixed the mechanical issues. Engine itself has been solid. When they are older with higher millage most likely there will be some issues all around. Thankfully I got my truck for much less than today's prices. So even though I have things to fix. Its costed less than what one would today.
To me the truck is flawless and it drives good. I took my trailer there and hooked it to it and it pulled well. I just needed someone who knows a-lot of trucks to have another look. If you have an email I can send it to you.
ive been told that certain year detroits u cabt machine the head because the supposedly the machine shops are known for taking the arch out of the head snd u hav a high chance of blowing out the head gasket idk how true that is but it kinda makes sense why they always recommend buying a new head for detroit
the old cummins ntc were bad about pin holes in the liners so i ran nal cool to stop the bubbles. the blocks were able to be machined without pulling it to fit new liners.
I have a 96 classic with a ddce lll I had to replace a Head on it other than that I got a million miles out of it before overhauling it mines was the 485 Detroit alot people never heard of it nice performing engine
That pitting on the liner is from the SCA drop out. Or just putting straight green coolant in there. It’s cheaper to put green coolant concentrate. As well as three pints of penn cool to keep cavitation from occurring. Some people don’t keep up with that penn cool conditioner or something similar of a different brand also is a factor. If you drive around bob tail like a show truck that doesn’t really matter about the conditioner. It only comes into play when the trucks working hard especially with being lugged.
Erosion aka lack of proper coolant maintainer, the liner will flex during operation causing a phenomenon called cavation ( air bubbles) in the 90, we were far far ELC coolant but even ELC should be replaced 100,000 miles . now a good rebuilder will mic the crank, and receiver which is the part where the lower seals make the block and if they are auto spec they will have not only the top counter board they’ll have the lower receivers redone and you can guarantee nice tight fit and eliminate excessive walk of the liner.
I see you like oem parts... those piston were originally made by MAHLE.. FP also makes the 23532555 pistons... i wonder what machine shop did the head trinity cast?
we have a 2000 series 60 Detroit in a western Star good running engine. We do a 100-mile run about every day with it some days it will use a gallon of oil some days two Qts and some days it doesn't use any it's always the same driver. any ideas what's going on
This one favorite channel unfortunately they won't work on truck the had swapped engine🤔 I wish they advised about it on RUclips I called to get my truck check I got rejected
Exelentes videos senor mecanico yo tengo una pregunta yo compre un camion freightliner 2007 14 litros y el dueño me contó que le cancelo la válvula EGR pero el que lo canéelo lo hizo desde la computadora del camion y también le calibro el turbo . mi pregunta es esta pude ud resetearlo la computadora para que trabaje la válvula o como salió del deeler por favor deme una respuesta de antemano lo agradesco
All Series 60 have blow by to a certain extent. It's what they do. If it's not making a racket or smoke out the blow by tube it's not doing its thing. They just keep going and going. Best motor ever made in my opinion. I've have that same motor. Got 1.7. Out of it before rebuild. At 1800 rpm and up it turns into a sewing machine. Smooth as silk and whining just like one.
Hello Adams, I drive for Prime Inc. and in a few weeks I will buying a fleet 2019 Cascadia/Peterbilt. Can I send you the service records for you to check them and do a pre purchase report for me? If everything looks good, them how busy are you to take in the truck for a full service. Thanks, George J
11:15 what is high mileage for an oil change? I try to do mine every 10k miles but sometimes i go to 12 or 13k due to mileage only beign 7 or 8k when im home...
I have sputtering and lots of smoke. The smoke comes and goes. The sputtering is on take off and downshift. 3 mechanics including Detroit is saying it number 2 injector. I replaced and still doing the same thing. Any ideas? 12.7 60series. 1998
We are having an issue with our 2013 D13 volvo. It will run for hours. The minute you stop and try to go again it jumps out of gear and says high clutch load on the dash. It won't go anywhere but tries to lurch forward. It's like you have no accelerator though. Volvo engineers have looked at it and can't figure it out. We are desperate
I know this is quite a bit later. I had this problem. The lever that changes gears inside the transmission had worn out. Comes from low air pressure. I had to replace the transmission. Everybody tried to tell me it was injectors. The mechanic had taken apart the transmission to show the exact part that failed. I have the same year and model of engine
It is erosion, now there is certainly both but the counterbore area under the liner and lower seal area are most definitely erosion, this can also be found on the head and injector cup. Proper coolant maintenance is a must to hinder cavitation.
It's called cavitation on the liners. Basically improper maintenance and poorly trained technicians. The new world of mechanics, if they can't text on it they don't know how it works!!
thank you for this video 🙏🏼 i have a question : what’s the recommended idle RPMs for this engine? when i turn on the cruise control and engage it goes straight to 1,000 but it seems too high to idle let’s say for 2-3 hours for heater/AC so i leave it around 750rpms . what are your thoughts on this?
I stopped using oem junk a decade ago. Cat detroit Cummins parts are just trash. Been using ipd kits for years and get more miles out of them and better quality. Building high hp motors
They only Precise way to do that engine , That is to pull it out of the truck , Do the block work and everything else and build the engine on the floor and then set it back down in the truck after you paint it , That engine was Mickey Mouse together It's all bad news , This QUESTIONS for the MECHANIC , Back in the day we put cross heads in the 318 detroits and then the Turbo and bigger injectors We made a 400 out of them , Can you do this with the 60 SERIES , put cross head pistons in it they are a one whole piston ??? I hate reman Or refurbish JUNK , If it's not NEW I do NOT want it , You are talking right they take an engine and get a bunch of junk whatever's gonna work and they put it in it and then paint it and you gotta refurbish reman engine for sale , Who the hades knows what they done to it , I've been doing it for decades let your engine warm up , There is a idiot on RUclips telling everybody not to let your engine warm up , it's gonna hurt your engine , This is what this idiot is telling everybody , For sure very good info and that's on any engine
Teardown of a 98 engine in 2023 of an engine that still works should tell you all you need to know
Best motor ever made! Had a cat before had a Cummins had a old Volvo but nothing compares to the 12.7
I've got a 99. No egr. 12.7. 80k on rebuild. Got 1.7 out of original. They like to rev. Oil at 10k with Lucas. Paper logs. With fuel way up in price and freight down 30 to 50% I am still making bank. Don't know how these guys are making money with e logs .
Beg 2 differ, I have a 12.7 60 series & a N14 Cummings, the N14 is a much motor. The Detroit is better on fuel but the N14 is much stronger. Luv them both tho
I get 4/5mpg with a van doing 80 and 6 doing 65. 140k on rebuild. I do 55 up parleys and sisters at 75k. I am worried about over working it. 500hp and 1550 Tourqe
@@edfalconi5022 I bet you are not old enough to drive
@@edfalconi5022 Amen brother! X2
Thank you sir for sharing your knowledge.
Thank you for watching and be sure to subscribe to our channel.
Good video, sir. Very professional presentation. Thank you.
You should open a shop in Houston.
There's at least 250,000 old trucks that work the Port of Houston.
Yes was the best engine for its run from about 2008 to 2015 years and the epa started killing the diesel engines with controls that the manufacturer could not handle then .thanks. Glenn
Have a 14L in a 2007 Columbia has been been doing great. Pre emissions. Have done some work around it. Though I think is the problem of the set up from the previous owner. It has earned its place and glad to have it. Hoping to get some more good use out of it before have to work inside the engine like this.
Iouuouououououoouou
Iouooouooouoououoouooououoouououou
Yep iYep ouooouuououou
Uouououo
Uouououou
Have almost 1.1 Million on the 14L and Its going strong.
Hey! Do you think it’s a good idea getting a 06 frieighliner Columbia 14l with almost a million miles ? EGR motor NOT ball gear. Never overhauled for $40k
@@shonzyjay1221 would vary on condition. In this market trucks have been going for much more than they used to.
How can I send you some picture of the truck so you can help me check it out ?
@@shonzyjay1221 you need to look at overall mechanical and cosmetic conditions. How does it run? Check wires, hoses, belts, fluids and so forth. Are there any codes? Are their maintaince records? How is the interior? Body? This truck I got years ago and accepted the flaws. Fixed the mechanical issues. Engine itself has been solid. When they are older with higher millage most likely there will be some issues all around. Thankfully I got my truck for much less than today's prices. So even though I have things to fix. Its costed less than what one would today.
To me the truck is flawless and it drives good. I took my trailer there and hooked it to it and it pulled well. I just needed someone who knows a-lot of trucks to have another look. If you have an email I can send it to you.
ive been told that certain year detroits u cabt machine the head because the supposedly the machine shops are known for taking the arch out of the head snd u hav a high chance of blowing out the head gasket idk how true that is but it kinda makes sense why they always recommend buying a new head for detroit
I enjoy your videos especially with older trucks.
That’s a dope tool box in the background
Thank you for your work and effort!
Can make a video on cummins x15 common issues please, thank you!
the old cummins ntc were bad about pin holes in the liners so i ran nal cool to stop the bubbles. the blocks were able to be machined without pulling it to fit new liners.
When is the earliest you have seen a liner failure due to pitting or corrosion in hours or miles?
I have a 96 classic with a ddce lll I had to replace a Head on it other than that I got a million miles out of it before overhauling it mines was the 485 Detroit alot people never heard of it nice performing engine
Just for a ballpark, what was the cost for this in frame overhaul? I have a 1991 DDEC2 I am having issues with and may need an overhaul.
That pitting on the liner is from the SCA drop out. Or just putting straight green coolant in there. It’s cheaper to put green coolant concentrate. As well as three pints of penn cool to keep cavitation from occurring. Some people don’t keep up with that penn cool conditioner or something similar of a different brand also is a factor. If you drive around bob tail like a show truck that doesn’t really matter about the conditioner. It only comes into play when the trucks working hard especially with being lugged.
Are you saying the liner pitting occurs more from lugging engine? Been wondering how many hours or miles is usual yo have liner pitting g failure.
Great job pal excellent explanation I wish you can be close to me I will take my truck to you 😢😂👍keep up the great work
Hey should my 12.7 pre egr breath heavy 5000 miles after a fresh rebuild
Great 👍 video . THANK YOU 😊 👏👏👏👏👏
I work for truck county of Wisconsin funny part is how Detroit wants rods back like they will reuse them.
Erosion aka lack of proper coolant maintainer, the liner will flex during operation causing a phenomenon called cavation ( air bubbles) in the 90, we were far far ELC coolant but even ELC should be replaced 100,000 miles . now a good rebuilder will mic the crank, and receiver which is the part where the lower seals make the block and if they are auto spec they will have not only the top counter board they’ll have the lower receivers redone and you can guarantee nice tight fit and eliminate excessive walk of the liner.
Can you do a video on a Volvo d12 2004-2007
Adam, Great content!
As always...
Remember piston rings take 20,000 miles to seat and will burn oil for 20,000
Me vb vaya “no ryg
Regiones
Hey Adam where exactly should I purchase the new head you recommend
Man pai an interstate McGee gd kits too three rebuilds no problem
Enjoyed the content ...very useful
Take a drink every time he says erosion
Damn fine video! Thanks
Great video!!!!!
I see you like oem parts... those piston were originally made by MAHLE.. FP also makes the 23532555 pistons... i wonder what machine shop did the head trinity cast?
I have 97 fld120 with the same engine. It is like a ROCK 🪨 💪💪💪💪💪💪
S60 Detroit 12.7 /14.0 an 3406 cat gd motor also n14 pre emission isx if mechanic has experience wking on it
we have a 2000 series 60 Detroit in a western Star good running engine. We do a 100-mile run about every day with it some days it will use a gallon of oil some days two Qts and some days it doesn't use any it's always the same driver. any ideas what's going on
They leak and run forever I love them.
Sixties have few but very common oil leaks, most are very easy to rectify.
One question between DD15. DD13. DD16 Where is the best and For transmission where is You recommendation
bolts us torque specs piston = n-m vậy anh
Do you happen to have an idea on how much does it cost to overhaul a d13?
This one favorite channel unfortunately they won't work on truck the had swapped engine🤔 I wish they advised about it on RUclips I called to get my truck check I got rejected
I have DD15,2014. I have check engine light on it says fuel mass low, what does it mean? Please help
Exelentes videos senor mecanico yo tengo una pregunta yo compre un camion freightliner 2007 14 litros y el dueño me contó que le cancelo la válvula EGR pero el que lo canéelo lo hizo desde la computadora del camion y también le calibro el turbo . mi pregunta es esta pude ud resetearlo la computadora para que trabaje la válvula o como salió del deeler por favor deme una respuesta de antemano lo agradesco
Can you make a video about the big cam 400 motor I got a 1988 FLC120 I'm trying to get back on the road
How much swapping 2015 Detroit dd15 for Detroit serious 60
ddec 4 was the best but i would take a Cat or cummins N14 for the Longevity
Gr8 info, bro
I do have 2001 detroit series 12.7 with automated transmission, 1.5 million, I'm thinking to rebuild, let me know, how busy you are.
10 sp or 13 auto
@@user-rc7gu5bt2o 10auto
I HAVE SCARES FROM WATCHING THIS FEED!
How much blow-by is acceptable it runs good does not use oil has 50 pounds of oil pressure 725000 mile
All Series 60 have blow by to a certain extent. It's what they do. If it's not making a racket or smoke out the blow by tube it's not doing its thing. They just keep going and going. Best motor ever made in my opinion. I've have that same motor. Got 1.7. Out of it before rebuild. At 1800 rpm and up it turns into a sewing machine. Smooth as silk and whining just like one.
where are you able to find oem parts now days for this engine
Freight liner sells you the whole over haul kit shut I got my whole motor done for 10k new head
How much cost to re-overhaul a Dd13 with 1.6MM miles on it?
BUEN DIA SALUDOS DESDE JALISCO
I would like to be dyno testing the Series 60's together àt Detroit Diesel test cells.
Hello Adams, I drive for Prime Inc. and in a few weeks I will buying a fleet 2019 Cascadia/Peterbilt. Can I send you the service records for you to check them and do a pre purchase report for me? If everything looks good, them how busy are you to take in the truck for a full service. Thanks, George J
Hey can you do some videos on paccar mx13 thanks! Love your videos
11:15 what is high mileage for an oil change? I try to do mine every 10k miles but sometimes i go to 12 or 13k due to mileage only beign 7 or 8k when im home...
My advice you're doing OK , Sometimes I let mine get to 12 but normally I do it right at 10,000 Pretty much every month
Get ecopure oil bypsss. I run 75-100k without oil changes, only filter replacements at 25k, have lab test oil samples
@@matbob7249 oil is cheap bruh... I dump mine every 5K. Easiest oil change ever. Costs me less than $180 and 10mins of my time
What's the oil pressure on this engine at after you run for a while
Mine runs 48-50 pounds at 1400 rpm’s. But mine only has around 85k since rebuild
@@TheFreightliner777 my run 55 at 1400 but went I stop only 25 at idling
@@TheFreightliner777 I have 379 detroit serie 60 12.7 500 hp just good engine
A machine shop that stands behind there wk don’t knock small shops that do gd wk
I have sputtering and lots of smoke. The smoke comes and goes. The sputtering is on take off and downshift. 3 mechanics including Detroit is saying it number 2 injector. I replaced and still doing the same thing. Any ideas? 12.7 60series. 1998
We would recommend replacing all injectors and fuel pump. Take note, finding a good set of injectors can be challenging
@@TATEXPRESSINC it smokes while idle mostly. I've changed 2,3,5 injectors and ECM.
We are having an issue with our 2013 D13 volvo. It will run for hours. The minute you stop and try to go again it jumps out of gear and says high clutch load on the dash. It won't go anywhere but tries to lurch forward. It's like you have no accelerator though. Volvo engineers have looked at it and can't figure it out. We are desperate
I know this is quite a bit later.
I had this problem.
The lever that changes gears inside the transmission had worn out.
Comes from low air pressure.
I had to replace the transmission.
Everybody tried to tell me it was injectors.
The mechanic had taken apart the transmission to show the exact part that failed.
I have the same year and model of engine
whats your opinion on the old m11s?
You said are you hiring? You have a location in san antonio area?
When should I do oil changes
Never! Changing oil is overrated!
Erosion or Corrosion? Not the same thing. I believe you mean corrosion.
It is erosion, now there is certainly both but the counterbore area under the liner and lower seal area are most definitely erosion, this can also be found on the head and injector cup. Proper coolant maintenance is a must to hinder cavitation.
If you use aftermarket parts they will pit and erode more than original oem parts>
It's called cavitation on the liners. Basically improper maintenance and poorly trained technicians. The new world of mechanics, if they can't text on it they don't know how it works!!
thank you for this video 🙏🏼 i have a question :
what’s the recommended idle RPMs for this engine?
when i turn on the cruise control and engage it goes straight to 1,000 but it seems too high to idle let’s say for 2-3 hours for heater/AC so i leave it around 750rpms . what are your thoughts on this?
Whatever RPM it's at when your oil pressure is at 30 PSI. Usually 1000
As above, 1000-1100. Why? One issue is the turbo seals will relax causing consumption issues.
I stopped using oem junk a decade ago. Cat detroit Cummins parts are just trash. Been using ipd kits for years and get more miles out of them and better quality. Building high hp motors
What’s the IPD kit I’m interested in looking into it
Whats IPD kit can't find anything on that name
They only Precise way to do that engine , That is to pull it out of the truck , Do the block work and everything else and build the engine on the floor and then set it back down in the truck after you paint it , That engine was Mickey Mouse together It's all bad news ,
This QUESTIONS for the MECHANIC , Back in the day we put cross heads in the 318 detroits and then the Turbo and bigger injectors We made a 400 out of them , Can you do this with the 60 SERIES , put cross head pistons in it they are a one whole piston ??? I hate reman Or refurbish JUNK , If it's not NEW I do NOT want it , You are talking right they take an engine and get a bunch of junk whatever's gonna work and they put it in it and then paint it and you gotta refurbish reman engine for sale , Who the hades knows what they done to it ,
I've been doing it for decades let your engine warm up , There is a idiot on RUclips telling everybody not to let your engine warm up , it's gonna hurt your engine , This is what this idiot is telling everybody ,
For sure very good info and that's on any engine
yep, let that engine warm up, it doesnt take much to let it warm up while you eat breakfast, take a dump, pre trip inspection etc
I only driove cat or Cummins
hi firends
Every 60s I’ve seen gets a million miles except those 99..
Can't believe how much Abuse some of them poor motors put up with sometimes
its cavitation on cylinder walls and counter bores not errosion plz
And what does the cavitation cause? Erosion, the little bubbles erode. I do like the drink every time idea though.
An cylinder head take to machine shop a gd machine shop
They patched it, itprobably stuck a piston before
I want to reach a million with my dd15
Corrosion!!!!
Bad title. .
D, ges
*****🇺🇸🎼🎸🎤It seems that no1 R compare as TAT Express Inc 🥰 explanation 🙏🥁🎹🎶🇺🇸*****
Nope cant stand Detroits
🌺 Pᵣₒmₒˢᵐ
Cat power eating Cummins and shitting Detroit’s since 1925!
Got a 12.7 I'll put up against any cat up 700 hp...
That isn’t saying much lol
Funny how it’s always yellow and red I see on the shoulder with the hood up
I will put my 600hp Detroit 12.7 liter I have heard all this Cummins and cat ppl talked until they line up and can’t hand with the big dogs
Most problematic engines.
quocbinhduong là em
What is you contact?