Sound Deadening and Insulating the Isuzu NPS300

Поделиться
HTML-код
  • Опубликовано: 9 янв 2023
  • The Isuzu NPS300 has become a popular option to convert into a touring truck. The issue is that the interior is limited for commercial use and factory sound deadening and insulation is minimal. Brendan from Car Builders walks through the process of making a NPS300 a comfortable touring truck.
    The Car Builders NPS pack comes pre cut ready to insulate your NPS300 Dual Cab. This pack is based off a 2022 NPS 300.
    This kit includes:
    Stage 1 Sound Deadener - apply to roof skin, floor pan, rear wall, door skins, above engine and bulk head. (this is not pre cut and comes in tiles which are easy to cut and lay)
    Mass Noise Liner - Stage 2 Premium underlay, covers floor pan, under seats and rear bulk head, pre cut to suit.
    Van Liner - Stage 2 Sound and Heat Insulation for roof skin, comes pre cut covering entire roof skin.
    Acoustic Liner - Stage 2 twin layer foam pre cut to cover rear wall.
    4 way Stretch Carpet - Pre cut to apply over Acoustic Liner, allows you to upholster rear wall to an automotive standard.
    What do I get?
    Stage 1 Sound Deadener - 6 x boxes (10.8sq/m)
    Mass Noise Liner - 5 x sheets pre cut (7.6sq/m)
    Acoustic Liner - 1 x sheet pre cut (1.7sq/m)
    Van Liner - 1 x roll pre cut (5sq/m)
    4 Way stretch carpet - 1.4m precut to upholster rear wall in 1 x piece
    Spray Adhesive - 3 x cans
    Install Kit - application roller, utility knife, foil tape, stubby holder, bottle opener
    Snap press stud extensions x 8 (specific to extend press button fasteners on bulk head area to allow for Mass Noise Liner thickness)

Комментарии • 13

  • @neraismail7084
    @neraismail7084 25 дней назад

    Thank you of buying the Isuzu truck

  • @redbugg99
    @redbugg99 6 месяцев назад +4

    I did this with a few layers of basic cork and spray glue .....
    It cost me 1/3 compared to your stuff. And it's extremely quiet....

  • @wek3000
    @wek3000 10 месяцев назад

    Wow Nicely done!!!!!!!!!!!!!!!!!!!!

  • @jdiazsilva5040
    @jdiazsilva5040 5 месяцев назад

    O. O ultrawesome boys, a beautiful work, my best regards from Chile 🤙🤙🤙🤙🤙

  • @pima237
    @pima237 Год назад

    Very good job👏

  • @kavinduheshan6229
    @kavinduheshan6229 Год назад +1

    Congratulations 👏👏👏🎉🎉🎉

  • @luimackjohnson302
    @luimackjohnson302 7 месяцев назад

    Amazing! Thank you Car Builders for sharing this informative video. Do you have any kits for Isuzu ELF truck? Greetings from Madang, Papua New Guinea!

  • @HuntingOldYella
    @HuntingOldYella 11 месяцев назад

    Do you do kits for the fuso canter?? I have a single cab i would want to do the rear wall and roof.
    For the heat on the roof, I've used Thermosheild paint on my bus roof and its amazing how much it drops the temperature.😊

  • @fraizer2600
    @fraizer2600 Год назад +1

    hi, can you please tell me if is any gain to sound proof the floor of an bmw e64 lci of 2009 ? is a convertible. when i try to remove the floor thing i see under is very things layers from bmw...
    then maybe is no sse to make all the floor but the door panels sides yes ? its a 2 doors.
    by sound proofing my interior i mean 2 layers, 1 against vibration and the 2nd foam for sound. ;)
    i plan to retrofit a bmw bower and wilkins sound system with there amplifer.
    thank you ;)

  • @bobbymacnear193
    @bobbymacnear193 5 месяцев назад

    Can that one to be changed with a sliding glass

  • @bobbymacnear193
    @bobbymacnear193 5 месяцев назад

    What is that bar behind the seat for

  • @ryteulopki8069
    @ryteulopki8069 11 месяцев назад

    AI ZU ZU :D

  • @redbugg99
    @redbugg99 6 месяцев назад

    All you did was painted black and add a label..... WTF.