Removing a Smart 451 Gearbox Step-by-Step to change the Clutch Kit and Diagnosing why it wont Drive!
HTML-код
- Опубликовано: 22 окт 2022
- Diagnosing why a Smart 451 MHD wouldnt drive. I pull the box out and show you how its done and what tools are needed!
Support here: www.amazon.co.uk/hz/wishlist/... 🙏🏼 
Приколы
Thank you for posting this video it is very helpful. You didn’t waste your time because the clutch was broken. Great little cars keep them alive 🤓
Thank you for doing this video & sharing. It explained to me why my Smart mechanic said the clutch is on the way out on my Smart4two and the repair will cost a minimum £1K.
Thats still quite a lot of money 🤔
Can I bring my car to you? @@DrizzDevelopments
Superb video, well narrated. So good to see a video compiled by someone with a working brain and a voice I can clearly understand. Shame you are on the other side of the country. All the best. My reason for watching your vid was, I was THINKING about buying a used Smart car - watching your vid was immensely helpful. Thank you
Thanks for the kind words :) Really appreciate it!
What an amazing video I was engaged all the way to the end. Glad you were able to find the issue and get it up and running !
Thanks mate. Appreciate the comment :)
Great detailed stripdown, that pressure plate was well shot, made a nice little car in the end.
Its really nice TBH, Especially the free tax 😂
Is this one better than your old daily?
@@nigelswann2873 Well its 3yrs newer than the black one, has AC, is free tax (black one is £30 a year) and now has a lot more new parts than the black one....
My smarts gearbox (I think) is making a noise. I’m gonna use this video to put a new gearbox and clutch in - wish me luck 😅 thank you for this video 👍🏻
You’re more than welcome!
Thanks for sharing, nice job mate
Cheers :)
Thanks a lot for the insights! Although I definitely don’t have a clue, how someone who is capable of dismantling the whole car does not check penny goods like a dust cover prior MOT.. 😂
Have you priced one up? ;)
Nice !!!
Yep good video, thanks
no worries!
Many thanks , very helpful. I have to remove clutch on an 03 but mostly the same procedure? Knocking noise on tick over sounds like pressure plate has come loose. Thanks again
No problem at all
On a 450 the "spider" frame that attaches the flywheel to the crank can break which causes a bad rattling.
Thanks for sharing. That's a lot of work for nothing. Now we are experienced.
Nothing? Why nothing?
Clutch replacement. I would definitely test actuator first. After watching your video ofcourse. I was just doing research on the Smart car. I'm thankful to have RUclips and all you content creators.
@@randyrobison335 Ok. Im. bit confused? Mine was the clutch itself? Or are you saying before going for a clutch change on yours, you would check the actuator first?
I’m never against reusing any serviceable parts because as you say it’s all about recycling 👍🏻🏴
In this day and age it certainly is!
I draw the line at used brake pads, they are so cheap new and it takes forever for used pads to bed in to different (used) discs.
Saludos desde México colega!!
Hello to Mexico!
У меня родстер и тоже ремонтирую сам. Ты крут чувак. Единицы могут делать такие машины.
Thabnk you for the compliment :)
my clutch is bald, i can feel it slipping so bad, i need to do this to my little bug asap, how long do you think this job takes, can you do a timing chain while the engine is on the car, whats your thought on ebay parts, mine just crossed the 190,000 miles on the road i am hopping to keep it alive much longer, i love this thing so much i don't know what i would do with out it 🥲
Takes a morning. No idea on the timing. Not done one yet im afraid. Id go with the OE Sachs clutch every time. Was very reasonably priced.
Thx for a good video..very helpfull...my smart roadster refuse to start.. fresh battery and immobilizer deactivated.. turn key still nothing... any idea where to start looking
Check to see if you have brakelights. Faulty brake light switch is a known cause
Got these codes P0900 - P0805 , already ordered a used gearbox hopefully that will solve the problem 🤞
Did it fix the problem?
Why is oil above the transmission? (the black oil ) Where does is it come from?
I just bought a 2013 Smart Passion Cabriolet. It has the automatic transmission with the paddle shifter on the steering wheel. My trans is making a rattle noise. Does mine have a clutch also?
If its a 451 (this shape) then definitely it will have a clutch. If its the next shape along then i dont know as not had one in yet
for 451 80k-120k on clutch is unfortunately max it will do. 60k if you dont bother to adapt gearbox at least every 15k.
Good video bud, recently done an engine overhaul and clutch, can't start the car though and the clutch isn't disengaged even though the car says its in neutral...stater just slams into flywheel and nothing happens...any ideas?
No not really. Have you tried another Starter? Obviously this one was MHD so used the Alternator as a starter
@@DrizzDevelopments yeah, OG clutch bench tested fine but thought it may still have an issue so tried an ebay starter and that works too, I've got a feeling the clutch is not disengageing from the pressure plate even when the car says its in neutral
Another good video it looked a pig off a job
Thanks Mike :) It was all fairly easy to be fair
@@DrizzDevelopments your welcome pal
Great video. How much time to take gearbox down in real time? Aprox 45 min?
@@FlashBack82 It was my first time and I used hand tools so took a little longer
Hallo, i want ask i have smart Fortwo same like the video, my car cannot start , i want ask where is the starting motor located?
First things first, do your brake lights work? If they don’t illuminate when you have the ignition on and press the pedal, change the brake pedal switch first. If they work then it depends on the model you have. If MHD then the starter is built into the alternator and you need to drop the subframe to lower the engine enough to be able to change it but they’re not cheap. If it’s non MHD then it’s bolted to the gearbox like any other car
Great video , thank you. Please could you tell me the socket o need for the axle bolts? I only have up to E24 and this is too small. Are they torx or something else? Many thanks
Drive shaft bolts . I mean .thanks
I've discovered they aren't Torx but 21mm multi point socket. Thanks
@@richardmawdsley2589 Glad youre sorted :)
Someone help me, the car starts fine with no dashboard lights, it goes into R and N and gear 1 but the car won’t move when peddle is pressed? It’s as if it’s still in neutral and just revs
Youll probably need to do this job then to see
Did you used to have a Astra 200ts?
I did indeed yes
Used my 451 to tow my brother's stuck Berlingo van, I know I know. Seriously overheated and smoked the smart clutch and now after two weeks the burnt smell is still there. Any ideas?
Probably full of worn clutch material from the tow and as it warms up it smells
@@DrizzDevelopments thanks a lot mate, that seems quite plausible.
I thought it was you! I’m spankees old mate with the vectra turbo, mate, didn’t I buy my Astra van that I put a Saab engine in off you?
Yes mate Christ that’s a blast from the past! Hope alls well in your world lol
This a diesel one?
Nope, MHD Petrol
@drizz how do we get hold of you
You just have. How can I help?
@DrizzDevelopments i have a smart needs a clutch replacement are you able to do it for me
@@anibee3433 Where are you based?
hello friend I have this dtc below on a smart can you help 1
Dtc p1700 Dtc p0886 dtc p0885 Dtc p1800
See here: www.evilution.co.uk/mod/obdii-error-codes.htm
where are based bro been looking for a good smart mechanic
Suffolk UK
@@DrizzDevelopments why are all the good smart mechanic out of London 😩 do u have web for contact
@@ashstonk drizzdkp@gmail.com
@@DrizzDevelopments awesome thx ☺️
How long does it take to change a clutch? My mechanic wants to charge me $1200 US dollars, does it sound fair?
If youve done it before probably 3hrs all in. Id allow a day for a novice
@@DrizzDevelopments thanks for the quick response. So, $1200 sounds a bit too much for 3 hours... They are not novices...
@@Danifender93 Id say so to be honest
@@DrizzDevelopments i think a lot of smart mechanics just say outreagus amounts for any work on smart - cause its a smart car and everything is hard on it ;) I understand air condenser is a lot of work (not hard maybe but time consuming) while clutch change looks really quite easy even for novice. Also it seems a lot of things is easier to do than on olderr models (450 i mean).
@@Stanwis Thanks for watching :)