PlastiDip Rims - Without Taking Wheels off the Car - DipYourCar.com How To
HTML-код
- Опубликовано: 5 сен 2024
- 🚩 Dip Your Wheels this color - www.dipyourcar...
🚗 Shop Wheel Kits - www.dipyourcar...
🎥 Dip Your Wheels Complete Video Guide- • Plasti Dip Your Wheels...
📙 Learn how to dip here - www.DYCUniversity.com
💦 DYC Detailing Suite - www.dipyourcar...
👕 DYC T-Shirts and Merch - www.dipyourcar...
Full Tutorial on how to Plasti Dip your rims without taking them off the car. Step by Step from Fonzie at DipYourCar.com
❤️ Please Subscribe to DYC!- www.youtube.co...
👍 Join our FB Group - / dipyourcarcommunity
👍 Follow Fonzie on Instagram! - / fonzie
👍 Follow DYC on Instagram! - / dipyourcar
DipYourCar.com is world famous for peelable car and wheel paint. You can change the color of any part of your car by yourself! A do-it-yourself product that you can use at home and is totally affordable. Contact CustomerService@dipyourcar.com if you have any questions about DipYourCar or Plasti Dip Products. Spray and paint your wheels, your car, your emblems, your trim - basically anything. Peel it off and go back to the original color when you are ready. Durable, easy to clean and maintain, dipping your car is something almost anyone can do! 
Авто/Мото
I did this exact thing on my car. Its been 2.2 years and that stuff holds up like a champ. A+
I haven’t tried it yet but I smell bull
Wouldnt be surprised honestly. On my last car (civic) i did the rear badges and messed up the H badge because i didnt dry it properly on the inside so there was peel along the entire inside bottom of the badge.
Thing held up for almost 2 years with the peel through tons of car washes and when I finally got around to taking it off to redo it was a bitch to get off and i ended up using adhesive remover.
I just finished Plasti-dipping my wheels for the first time. I'd like to make a suggestion. After you're done and you're ready to take the trash bag or whatever you used to cover the caliper and rotor, try reaching around the wheel and pull the bag out from behind the wheel.This eliminates any possibility of tearing the Plasti-dip when you pull the bag through the spokes.
Old message but after a week of reviewing videos and comments im about to do my wheels as soon as dip comes in but tips very helpful after almost a decade!
I could listen to you speak all day. You're a very articulate, well spoken man, and it's obvious how intelligent you are. Not bad to look at either. Plasti-dipping skills are also pretty impressive (to say the least).
Ask him for his number already
And what would that achieve?
Jessica Smith lol his heavenly voice.. haha im just being a dick
L Britez you know you were serious lmfao
She wants him to plasti dip that pussayyy and bite it back off 😉😂😂😂
"I usually respond within an hour regardless of what day or time it is.." - sounds like your work/life balance is right on point my friend 😂😂😂👌🏽
Taping is such a waste of time, not to mention you now have adhesive all over everything. Cut up a few trash bags and stuff them between the spokes. Wala! Takes no time, no sticky surfaces and everyone has trash bags
That's a great idea! Worked for me. Easier than all that taping.
Good idea.
Haha he actually did that in a later video
FattyMateo I used balled up newspaper and stuffed it between the rotor and wheel.
Wala! ?
Might want to mention to clean the wheels real well before paint. Also you can use a metal file or even a small 4" grinding wheel to smooth out the curb rash on the rim before paint. ☺
He did
Did mine today, Got all 4 wheels done with 1 can, i ordered 2, I did 3-4 coats too, but made sure it all went on the wheel. so worth it
Dillinger120 do you drive a golf cart?
DipYourCar actually washes their dipped cars with a pressure washer.
Plastidip is just like real paint, except that it peels off when you want it too.
I plastidipped by buddy's charger, the entire car, about 2 months ago. looks great and he washes it all the time.
Wow Fonz, it's like i'm a part of your family watching you grow (wipes tear from eye)
Yes, it will work on any finish of rim, plasti dip will not harm your rims in any way, so if you decide to peel it off, your chrome with be like it was when you sprayed it on :)
Hey, you can use the tiny balloons to slide over your bolts if you don't want those painted.
Awesome tip man!
Finger condoms also work. Or real condoms if you have extra small on hand like me :)
just did this today to my 05 gto stock 17s. there is no need to take the wheels off if you can get every angle.. came out awesome.. did 5 coats each wheel.. so far looks excellent.. even if it comes off for some odd reason after a while i'll probably do this again.. costed me about $10.. can't go wrong with this
You said light dusting ? But what I see is a fully black wheel?
Bullsnation it’s edited
Bullsnation I thought the same damn thing
he meant light dusting as a way of spraying the wheel overall, you don't want the dip to drip or pool so he recommends a light dusting technique (i just noticed you posted this 2 years ago but)
OnionDippy hahahahaha
terrible editing
i did it just like he shows here. the key is to take your time. it took me about 2 hours to do. that may seem like a lot. but they came out beautiful
this guy has great hand movement
Thank you so much I didn’t know what to do with my wheels and now I can get black trims without taking all 4 wheels off
So, it really is that simple
***** Lmao!! I just said the same shit to myself...I've been putting it off thinking it was going to be a bit of pain in the ass, but it was easy as fuck.
I did mine lastweek with the glossifier and my wheels were dipped for over 8 months. They turned out perfect.
An invaluable clip. Thank you. You're a great presenter.
I bought three cans and painted the rims on my BWM Convertible black.
I bought three but two are more than enough. Within an hour of me finishing the last coat, it started raining but the paint had dried by then.
My car looks great.
After I finished the first coat, how long do I have to wait for doing the second coat? How to clean the brake dust from the rims?
I used trash bags to cover the brake discs and dipped my wheels still on the truck. It came out awesome. Took me a little under 2 cans to do wheels, badges, and license plate covers. Plus tape the total investment was $20.07 plus a couple hours and some beer.
I was able to cover my BMW's 20" rims with two cans, four coats each rim.
I have over 10,000 miles on my plastidiped rims, the only place that is messed up is in around the lug nuts when I rotated my tires I chipped it in a few spots but you cant tell with the lug nuts in. Over all very impressed, only downside is you have to be very careful when washing them.
How do you take the wheels off? What is plasti dip and why am I commenting this video..?
lol
Well the wheels on the car have a lug nut cover to make it harder for people to steal anything from the wheels.
P.S. It's also to hide the lug nuts to look pretty.
Jack hammer, and axe are the best ways to remove stuff from things i find. If it fights back a cross bow is also handy. Hope this helps.
the plastic bag technique works wonders, I just did it yesterday. easy as hell.
Thanks for this man, just finished mine and it was flawless.
After watching this video compared to your newer ones, you can see how far you and your company have come. Good work!
Hold on, you still have to remove the tire to tape up the calipers and rotors/drums. Kind of defeats the purpose
same thing I was thinking.
A bit of careful manoeuvring through the rim holes and it's easy to tape off.
I actually tried it without taping them off and it worked as good
really? did it affect your brakes or did it wash off with a car wash?
Nope. I have drums in the rear so I didnt worry too much about paint, just wrapped the bag around it a little. For the disks, I just wrapped the bag tightly around the rotor. As long as there isnt much wind, those bags wont go anywhere and they cover the rotor completely
i bought vintage gold from dipyourcar.com and i just finished my rims and i must say it came out amazing i had no problems with the can.
just use index cards around the wheel besides taping around a wheel takes a long time.
Jon Cianflone won't fit on all wheels
Thanks for sharing. Will consider this. I would wear mask and also cover the entire left front area with newspapers unless its safe on the paint. Just extra precautions.
Do a video on deep dish wheels with only the inside of the rim being painted leaving the chrome lip
I just did my stock wheels (AKA Pie plates) on my C5 A6 4.2 and it turned out beautifully! Did the garbage bag trick covering the brakes and did 4 coats. Did it in 45-50 degree weather.
Do you think getting new tires would mess it all up? Meaning when they balance the tires and just put them onto that machine to get the new tire onto the rim. I was wanting to do this completely black out my stang lol
Have them balance it with sticky weights. Typically its known as A4 on the balaancer
I put 6 coats on mine,out of 4 cans,I had it on for a month now and it still looks new,it's been raining of and on for 5 days now, no lifting or anything still looks good
Can I plasti dip bald head black 😀
Yes
HAHAHAHA
I plasti dipped my Avenger and uploaded a video a minute ago of the results. Plasti dip is awesome!
That curb rash is still pretty visible.
looks like shit
I think sanding before then plastidip would look much better
Glazing putty, feather it in, paint it
Should've used a little bondo to rub in the gashes, wouldn't fix it but it would be less visible
Yes, that's the point of PlastiDip, if you don't like it then just peel it off. This goes for their other products as well such as the glossifier for that glossy look or the pearlizer for the pearl look. This applies to any surface...I'm thinking myself of doing my rims first and eventually the whole car. Hope this helps.
how many cans does it take to paint 4 wheels? thank you
+Duc1198YamR1 1 for each wheel. you can do it with 3 but 4 to be safe
I did 4 rims, grill and all emblems with 2 cans
dan mal you did it WAY to thin then. You will have a hard time getting it off. With plasti dip it’s not about how much it takes to make it look good, it is how much to make it look good and be functional when needed.
Riley Peters what do you mean? Do you need a thick coat?
Just out of curiosity 6 months later how is the plasti dip holding up? if you havent removed em yet...
it looks great!! check the end result the curb rash looks worse.
I was wondering if you can plasti dip anthracite rims??
What are they ?
I dipped my Chrome 24 inch wheels Bennett Bogard from Dipyourcar told me it would take 5 cans. i ended up using 8 cans. the white doesn't cover good. but finished product turned out NICE! suggest taping off the tire on Low pros or just spray the crap out of them with a nice thick coat and it will peel better. if your going to do big rims buy the spray gun and get the dip in gallon form. the spray can bottle will kill your spray finger!!
would this help damaged rims look better. to are my rims are kind of scraped up so do you think this will help
+vernon russell yes! i had curb rash and scrapes and my tires look clean AF now, you need to give the affected areas a lil more TLC in your spray pattern so you dont make an uneven mess.
vernon russell o
i havent tried going into the carwash but i think itll be good cause i pressure washed my rims multiple times. still looks brand new
What do you do when you cant get in the rims to tape the brakes? My rims have lots of spokes so i cant get my hand in there.
You're going to have to take the wheels off then, it's not too hard.
thanks
look up how they put trash bags in there. that's wut I did today, just did mine. if u cnt fit ur fingers in to weave a bag threw try to use something small to pull it threw for u. it works very well, otherwise yea take the wheels off.
Joshw124 Ill try that thanks
Didnt think of the trashbag will have to try, thanx!
I came to watch this video before starting on my car.. I did a double-take when I realized I had those exact same rims.. And that car! 04 CTS! My car is black, and looks fantastic with black rims. It was as easy as I've heard, but oh my god my arms and legs.. I'm exhausted.
How do you tape off the inside?
lenabobena fine as
T-Roy IRH 😂
Lol
Old fonzie videos are the best!!!!!
will they wash off at car wash?
no
Nice thanks again
No way. My dipped rims have been through about 3 NY winters, car washes and still look newly sprayed. Don't even bother with special rags, I just wash with soap and water whenever I wash my car.
Nice
I plasti dipped my rims 2 days ago, and it looked great. But today I noticed it was peeling on almost all of the wheels. I did exactly what you did on here. Light coats, up to about 4 coats. But right where the weight balance was it started peeling and around the lip. I went around the lip like you did but still it peeled. I redid 2 of my rims today, hopefully it will stay on this time.
"6 inches away" as he's 1/2 an inch away.
Lmao
I did three medium coats and the last coat alittle heavier and it turned out smooth. Make sure u dont let the can get low tho.because it will spray areosal and no plasti which will in turn leave blotches. I always pitch my cans in th trash when they get to a certain point.
bout to plasti dip the rims on my white smart car hahahha
I like this stuff, i have used it on Front & Back Toyota emblem, i have painted a lip a front & back lip on the car, have sprayed all my tires, & even looks good on my hood. Looks like carbon fiberish
Love the porn music in background!
It did, Now i gotta make time this weekend to do my wheels again..
I need a hot guy to do this for me to my car lol 😛
😎 some one called me!? My name is Bond.. James Bond,how may I assist you princess!?😏 lol
+Denis DiCaprio cringe
+Denis DiCaprio dude that was gay as fuck
+Denis DiCaprio calling other people creeps while you're hitting on a girl over youtube 😂 priceless
if you read comment AGAIN, you'd noticed I mentioned that he is "all over my nuts,meaning he's all over my youtube shits" and my comment was a joke. why would approach a girl by calling myself "James bond" . knock some sense i to your head Darius Whited.obviously u needed some attention😂😂
the main point of watching this video is see how you block the brakes and caliber and the routers but you already did it so no point of watching the rest. we all know how to spray
Thanks. I added a final thicker coat and the finish is smoother.I definitely agree with you about making sure the can doesn't get too low. I think there was a place where aerosol w/ no PlastiDip came out and it made the finish pretty bumpy. The final thicker coat helped smooth that area some, but still not as smooth as the other areas. I was an easy way to black out my rims and isn't permanent.
Plastidip is amaaaaazing, I did my emblems rear tail light and front sinal lights gas door going to do rims and maybe hood this weekend
I wouldn't call them bursts per say. Fonzie is releasing the trigger when he changes direction so there isn't an overlap at each change is direction.
Did mine yesterday.. I failed lol so I'm gonna try again today. Don't rush!
Yes you can, just make sure they're clean of course to not have any gravel or dirt stuck in between the initial coat and glossifier.
this guy is awesome, I literally just done that to my wheels and they came out awesome, even did my door handles and mustang emblem in the back. (2005 white v6 mustang)
I'm dipping my chevy sonic mags tomorrow, I can't wait the all black will officially be complete
Nicely said & done.now I know I can to this on my car without paying anyone. Thanks
Awsome just got my cans today will plasti dip my rims tomorrow morning
I have 15 inch wheels on my Mazda and I used 2 cans completely. Came out really well, mine were corroded beyond fixing, so I covered them with this. It comes out really even. Even if you kind screw up. I've also done my emblems and they look good after 3 months. I love plasti dip =P
Just got a 2015 yellow Camaro and it has chrome rims, something about chrome I just don't like and I know the black will look amazing with the yellow so I have to try this out, thanks for the great video!
i have an 04 cts and i wasnt sure how it would look..but this video helped me out thanks!!
I use this to protect my wheels from the road salt during the winter, keeps my rims fresh until the spring
Depending on the dish and surface area...but it took me a little less that 3 cans for my 19s and I sprayed a lot on there
@evergtz95 i have plastidip on the front bumper of my 05 forester xt. ive been through 4 car washes so far and it still looks like i just put the plasti dip on. its very durable stuff. the washes had the spinning brushes that beat the front of ur car, too
If you spray it on thick enough, yes, it will peel off in sheets relatively easily. I think if it peels off in little bits, it wasn't put on thick enough. It also shouldn't mess up the original finish of your rims.
I live in Canada. I am in Toronto and bought the product at my local Home Hardware for around $18.00.
2-3 cans for 4 wheels if you do 4-5 coats per wheel. No sanding. Let dry for 15 min or so between coats.
You can also put notecards between the edge of the rim/tire
I literally JUST got done plastidipping my 2003 Maxima, if you're just doing the wheels, you'll be fine with 2 cans. Get 3 just in case... Also, you should use it on your emblems, I plastidipped my nissan emblem, maxima emblem and my SE emblem. I did the grill on my car too. I'd say pick 3 cans up and you'll be fine.
Use trashbags. Thread them behind the rims but infront of the brakes/calipers. make certain the brake components are covered and the trashbags are not touching the rims where you will be spraying. Once the PlastiDip has dried, carefully remove the trashbags.
@tzxsr yes. they have a kit that is set up to actually cover ur whole car
Take a small blade and trace it around the edge of your rim Inbetween the tire itself and the rim, that way it separates te two sides, then peel off the river from the tire
I will be getting a new car soon, and would consider PD for my wheels. A couple questions though based on off-car work: 1. wheel nut seats: masking might be hard, is it easy enough to take off to ensure proper seating of the wheel nuts? 2. maintenance: when shops repair flats, or you change your tires and reballance, is it easy to touch up? 3: how easy is PD to remove?
Plasti dipped my f150 emblems. Everybody thinks it was professionally done lol. Painting my wheels in a couple of days.
Great job Fonzie. I like your all-business / responsibility approach in showing the excellent properties of PD, as well as your own expertise. Thanks for these very helpful videos.
I just plasti dipped my WHOLE car. It turned out GREAT! I am soo happy with it. I was originally planning to get it re-painted so I sanded the whole car down with 400 wet. I used to work in a high end body shop so sanding cars and prepping them is not a big deal. I am curios to see how long this will last. I put on 7 good coats, do you think the plasti dip will last longer if I wiped it down once a week with some sort of protector such as Amor all?
It's plastidip, not paint; therefore there is no need to sand or prime, it's not meant to be permanent. That being said it's held up quite well on my G6 18" stock rims, over 10,000 miles and still holding up well.
Mainly because if you want to sell the rims later you can most likely just Peel it off. Its not completely permanent like paint.
They have a glossifier spray that you can spray on after you dip it
personally I just stuffed a load of trash bags / carrier bags behind the rim and sprayed.. didnt bother with tape
I use index cards and place them around the rim when I dippped the wheels of my mustang, it helps a lot; as well as use a grocery bag to protect the discs and calipers
that's because you're dumb
thornygravy then why'd u give me a thumbs up?? and it actually works :)
lol ikr :)
Wow! This is great. I had planned to do it a totally different way. That's amazing!
Go to kijiji, some people will buy at wholesale prices from online sources and re-sell them for cheaper. I got my 7 cans for 11 each. Meeting up is much more inconvenient than going to a store though.
From personal experience, about a can and a half to 2 cans with 4 coats on each rim.
On my car I dipped the wheels about 6 months ago, still holds up fine to washing like normal
ok I found out. You need the one that doesn't say vinyl. I asked a few people who did it on their rims. so basically the one that say black rubber coating spray. And I don't know about the color variations e.g gold. I'm only doing black.
I'm definitely taking my wheels off. It's more of a hassle to wrap your brakes with the wheels on the car are rather than to just take the wheels off. And at least you don't need to mask your wheels. BTW, I have a flint Mica Scion TC and I want gold rims. Do I just buy the white base dip and the gold metallizer?
i had a question, if you dip your rims without removing them, isn't there a chance that gravity causes the paint to drip down?
You sure you don’t need primer or Sand paper before the paint? Some say it’s necessary.. but you did as fine job without sanding the alloys or even using the primer ..