You are watching a master at work! Not only in assembling the motor but the attention to detail in the video quality. All the experience throughout all these years. Devin you definitely deserve more subs. 👍
@@ukaszkwiecinski1781 could you explain how he built it bad? I am confused as I've seen you on other comments saying he built it bad but not explaining
Devin, put the stock intake manifold back on. You won’t regret it! It flows incredibly well and you may lose power without it. I have been through enough setups to know. 800-1000whp no issues for peak power up top using the stock intake manifold.
This video was mesmerizing! I'm not into ASMR, now i believe I haven't been because I haven't found the right content. This was amazing Dev. Great Job, makes me feel better that I knew every single step from having learned how on this channel. Thank you!
Hey Devin As a consistent follower and subscriber of your channel for many years. Forgot the year lol. Do remember it wass your dads shop with a subi. Think it wass the forester. Since the red evo x build that after jarred drove or still hass in his fleed im a true member in your YT carreer. I still love your content but think there is much more improvement for you to get out your channel. I personal would like to see more cars driven content on your channel. You have a real serious fleet of amazing cars sitting in storage. Your popularity can make as i belief in. A huge boost by creating more real car driving content in general. I will give an example. do you know DDE (Daily Driven Exotics)? They are huge now like in same period as i follow you. You have the cars and equipment. Please use that for future fun and entertaining content mate. You will serious make me happy with that and i think alot other followers too. Its a writhen rule to know your specific knowledge on the builds lol it only gets a little boring to me as i speak and hope to many others. Its an advice and a hope. Its your decision at the end Hope my words make a little push in any positive direction Keep up your great work your doing well
The tap to install a Time-Sert/Helicoil at the beginning leaves a good bit of concern on the table. If this engine fails due to ringland/rings, cylinder scoring, or rod bearing failure; it's because of the metal shavings that made their way into the engine. Not only that, but the hole wasn't tapped completely at 90 degrees. This should have been done at the very least with something covering the coolant passages and cylinder walls.
I would think you would cericoat the entire hot side. Not just to keep it cooler but give it a uniform color. Much nicer looking than wraps and blankets. Of course you could do both. Keep that expensive engine and bay cool.
What was the tool you used at the start? Was that to bore out head stud threads for thicker studs? If so is there another tool for the heads to be bored out also?
Devin please loctite those bolts on the intake manifold. I swear mine fell off and ruined the teflon gasket for the plenum and RZCrew can’t even follow through on trying to let me buy new gaskets.
Are evo engines just old eclipse engines its hard for me to decipher? also i know like a subi Ej 2.5 or a hond k series but when it comes to eveos 😩im stumped
Depends on whether it's a 4g63 or a 4b11. Even if it's a 4g63 it's not exactly an eclipse motor, it got updated substantially, but it would be a later generation of the old eclipse motors.
Why u need a 4p head? For what application? Unless u going big all-motor, you should just get a $200 k20a3 head and have it ported and put a supertech valvetrain kit with a nice cam. Saves a ton of $$
Looks like a dodge engine maybe? Idk I rebuilt one that looked super similar and it was out of a dodge caliber, I forget the year tho lol. beautiful build tho
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
The talent in both the engine building and filmmaking aspects of this are mind blowing
there's so much stuff wrong in this video.... he's not very "talented" in building engines.
@@ukaszkwiecinski1781 And who are you sir?
@@ChiefJrod i have my own shop and have 30 years of experience as a mechanic.
@@ukaszkwiecinski1781 I see nothing wrong here.. He measured all the things to the specs..
@@ukaszkwiecinski1781your top playlist on your channel is “Forza Horizon 4 money glitch”. You’re literally 15.😂 “30 years experience”.😂😂😂
I love building engines, grew up doing it with my dad, the most tedious but relaxing thing ever.
That engine is a work of art. Sick video / engine build.
❤❤😂😂🎉🎉😢😢😮😮😅😅😊
❤😂t😢😢 ❤😊😮😢🎉🎉😂❤😂 🎉🎉❤😂😂😂😂😂😂
You are watching a master at work! Not only in assembling the motor but the attention to detail in the video quality. All the experience throughout all these years. Devin you definitely deserve more subs. 👍
he built it so bad... he ain't no master
@@ukaszkwiecinski1781 could you explain how he built it bad? I am confused as I've seen you on other comments saying he built it bad but not explaining
@@G3ck07 hes just a hater
Cheaper to watch you build a motor then me do one hahah. Satisfy 👍
I liked the purple valve cover over the bronze but that manifold looks sick! ☑
Agreed, I really liked the purple accents
Devin, put the stock intake manifold back on. You won’t regret it! It flows incredibly well and you may lose power without it. I have been through enough setups to know.
800-1000whp no issues for peak power up top using the stock intake manifold.
Devin deserves every ounce of his success
So freaking satisfying
Man, this is sooo esthetically satisfying
This video was mesmerizing! I'm not into ASMR, now i believe I haven't been because I haven't found the right content. This was amazing Dev. Great Job, makes me feel better that I knew every single step from having learned how on this channel. Thank you!
Hey Devin
As a consistent follower and subscriber of your channel for many years. Forgot the year lol. Do remember it wass your dads shop with a subi. Think it wass the forester. Since the red evo x build that after jarred drove or still hass in his fleed im a true member in your YT carreer. I still love your content but think there is much more improvement for you to get out your channel. I personal would like to see more cars driven content on your channel. You have a real serious fleet of amazing cars sitting in storage. Your popularity can make as i belief in. A huge boost by creating more real car driving content in general. I will give an example. do you know DDE (Daily Driven Exotics)? They are huge now like in same period as i follow you. You have the cars and equipment. Please use that for future fun and entertaining content mate. You will serious make me happy with that and i think alot other followers too. Its a writhen rule to know your specific knowledge on the builds lol it only gets a little boring to me as i speak and hope to many others. Its an advice and a hope. Its your decision at the end
Hope my words make a little push in any positive direction
Keep up your great work your doing well
Yep.. I think Devin is just too obsessed with building..
Love when there aren't any words. Not necessary.
i shed a tear watching this beautiful work of art, if that engine could it would be smiling!
Beautiful work
doing this in silence is absurd, love it lol
man idk if these are your most watched videos or not but they are great
I love the huhn solution kits!
🔥🔥 can’t wait to here it running keep doing your thing on these cars
Intelligent wark, Noo one word 👏🏻👏🏻
Amazing . Excellent Work MR Dev!
Prep is so much work. Check and recheck everything. Record everything.
That calmed me down so well, thank you sir 😎👍💯
i went from watching a video of someone rebuild an engine in the middle of nowhere with basic tools in the dirt to this. Both master mechanics.
Damn...Devin never fails us.
What a lovely ASMR, such a satisfying content.❤ Keep it up man
Honestly 12k don’t seem all that bad, looks like an awesome build
I love the bronze on the valve cover but idk how I feel about the red intake, maybe a wrinkle black.
çok güzel bilgiler vermişsin Ustam teşekkürler
more content about asmr building engine please. love it
AMSOIL assembly lube for the W! Watching with my 2yr old son. He didnt blink the whole video.
You are the man of the EVO 😊
man that was a simple but yet sick video on the engine build
Very clean job and great video! Thumb 👍
The tap to install a Time-Sert/Helicoil at the beginning leaves a good bit of concern on the table. If this engine fails due to ringland/rings, cylinder scoring, or rod bearing failure; it's because of the metal shavings that made their way into the engine. Not only that, but the hole wasn't tapped completely at 90 degrees. This should have been done at the very least with something covering the coolant passages and cylinder walls.
Yeah this is really nice to watch
Watching your Asmr videos before going to sleep knocks me out bro. 😂
Looks like MAGIC 🔥🔥🔥
This was Hella awesome to watch
I would think you would cericoat the entire hot side. Not just to keep it cooler but give it a uniform color. Much nicer looking than wraps and blankets. Of course you could do both. Keep that expensive engine and bay cool.
Great work very skill full 👏 👌 👍
Great video man ❤
Colour combo 💯💯💯👌🏾👌🏾👌🏾🔥🔥🔥😍😍😍😍
Next video:
Tearing down the EVO engine....again.
Haha as always
You are my inspiration for real❤ my respect
That block is the smaller than 1 of my bbc heads! That’s wild. BBC 509 cid 750 hp 740 ft lbs of torque. Makes my boat run in the low 90’s!
Awesome video Devin
Cool video, no chatter, no unnecessary advertising just a little too short 😅
Love the work ethics.
Insanely great video
Thats gorgeous
The car ocd mad scientist at work in his zone, clean asf.
Rtv on top and bottom of everything. Not gonna leak for a ong time!
Thank you brother. This video gave me life lol
I made the same mistake on the first engine rebuild in auto school. 1 piston assembly at a time. Gj
executed perfectly !
I now understand why engines are as expensive as they are. There's so much more to it than I thought.
What was the tool you used at the start? Was that to bore out head stud threads for thicker studs? If so is there another tool for the heads to be bored out also?
Devin = Goated
So relaxing. Not sure why but it is lol
Devin does it best
Devin can you explain one day all the measurements and how they work together
Whats that blue pressurized bottle he uses to clean parts? Is it some kind of brake cleaner type stuff?
I can't believe I just searched "ASMR car builds" and a perfect video came up.
thanks for sharing that. that was epic.
I liked it no talking just working
Nice work.
no way did this guy just drill and tap his own headstud thread????
Thought I was the only one to notice that myself 😂 I have got to step my game up 💀
The old studs ripped the block threads out.. pretty insane 😂
thank you
The theta 2 engine in hyundai and kias is sooo similar to this engine...
Looks good.
Nice video man!. Quick question thou, was there a reason why you changed your assembly lube?
my type of asmr
It was great ❤
Looks like a nice engine to play with that ❤
Hi Devin, where did you learn all these things, are you a mechanic or did you learn by yourself ? Your brother and you have alot of skills
The Mastery in showcase
Devin please loctite those bolts on the intake manifold. I swear mine fell off and ruined the teflon gasket for the plenum and RZCrew can’t even follow through on trying to let me buy new gaskets.
what was the first thread for? did it had a broken thread or bolt in it?
I'm also wondering
Looks like they were lining up that tool so he could drill out the head for larger head studs.
Did oem bearings in beginning not fit the spec u we’re going for or why did u replace the not checked ones
When’s the yellow evo hitting the dyno?
When it's fixed😂
He posted it 6 days ago
@@blacksta-rLMAO
Very Nice
Mentally Soothing .......
Is there a list of bits used aftermarket stuff etc
Where did you learn how to build your own engines? This is a goal of mine to learn how from start to finish
wow...inspirational...
@4:40 I don't use any hammers unless I'm driving nails. I see see so many "experts" bang the pistons in with some kind of hammer.
Are evo engines just old eclipse engines its hard for me to decipher? also i know like a subi Ej 2.5 or a hond k series but when it comes to eveos 😩im stumped
Depends on whether it's a 4g63 or a 4b11. Even if it's a 4g63 it's not exactly an eclipse motor, it got updated substantially, but it would be a later generation of the old eclipse motors.
What wrench is that? Fuel gen 2/3?
in this video he made enough money to build 2 more engines haha
my engine should be done around november too. just need a little bit more money to buy a 4p cnc k20 head.
Why u need a 4p head? For what application? Unless u going big all-motor, you should just get a $200 k20a3 head and have it ported and put a supertech valvetrain kit with a nice cam. Saves a ton of $$
@@JonHop1 i already have a k24a2 bored to 88mm fully built. i have ferrera valves and everything already as well
Pretty sure there will be rapid crack propagation from that initial hole he drilled
This guy knows what he’s doing be quiet
Explain why you think that?
Looks like a dodge engine maybe? Idk I rebuilt one that looked super similar and it was out of a dodge caliber, I forget the year tho lol. beautiful build tho
What was that hole for in the beginning?
i think i’m gonna be spending around the same. i’m gonna build a j35, just bought my acura tl type s with high mileage
more likely around $9k
Please people like and subscribe this guy is an absolute legend and his work is amazing. Every build is perfect.
Hey Devin Got any turbos for sale for an evo x?
Links to thise tools would be nice.
nice
Devin is too damn impressive😮💨✨
My favourite vids
Evo X needs a k24! 😆