This a LONG detailed setup video and mistakes were made and corrected along the way. I completely understand that this video is not for everyone. However, to the skate Nerds like me and the new skaters out there, I hope you enjoy. Please engage in the comments. Conversation and feedback are always great.
Well there is no higher complement than that. 🤣 In Korea I would listen to the nine club in the train. You can go a lot of places during the Mike V interview.
It is OG. SK8kings has the best ones. A lot of their rails and skid plates come with them. I by about 20 at a time. I think that is 4 or 5 bags. Worth it to me. Thanks for checking it out and the feedback. Really appreciate you being a part of it.
I love this video,I ain't skipping shit, feels like I'm hanging with a friend who's sharing some knowledge with me while setting up a board. Meanwhile I'm over here getting ideas on building my next board ( I Wana recreate my first skateboard) I really like your setup,I'm sure I've said this before but if you're ever out my way ( Virginia, Fredericksburg area) hit me up I'm down to shred. Kids and health issues prevent me from traveling to far but there's some skateparks close enough (30 miles or so) and I got a long ass paved driveway and a shin high box and plans for a mini ramp after christmas.cheers bubba!
Will definitely hit you up. I don't get up that way much but do find myself in VA Beach and Norfolk often so not a bad drive from there. That is rad that you enjoyed the video. I honestly question if I should upload it. Feedback like this makes it worth it. What was your first board? I am building a board that came out before I was born that will be sharing soon. Stay Rad Sir.
Was it too chill? I don't think I realized how chill it was until it was completed. I hope people take some time to slow down and enjoy it if they are into setups. Stay Rad
Appreciate you in the chat during the premiere. I definitely like to keep my companies and distributers as group as possible. I think I believe that the components are just made to work together best. I am a weirdo 🤣🤓. Stay Rad Sir.
The same thing happened to me when i got back int skateboarding after 30+ years I did my first old school setup (Rob Roskopp Reissue Face Deck) I got the old school yellow Riser pads not knowing they changed size on the reissue deck. Cool setup my twin brother from over the pond 🛹
What got me is a lot of my G&S reissues have the new bolt pattern. I run ACE on my Neil Blender boards. But lesson learned. I did get the right size wooden risers for it and changed it out with different Indy's so I could get my salaba back the way I like it. I am a nerd hahaha. Stay Rad Sir.
Appreciate you checking it out. I am setting up boards anyway so mine as well film it now and then. Could do every set, that's all this channel would be 🤣. Because I have an addiction. New trick video late tonight or early tomorrow. I am going give my self one more session to see if I can get it better. Stay Rad.
I had a big ziplock full full of stickers. It was a mess. I asked the wife for sticker books and she came through. I like having them organized. I don't know why I love stickers so much. Seems kind of silly at 46, 3 days from 47, but man I like them. I will get more stickers made next year and let you know. Appreciate you checking it out. It is a really long video. I didn't want to cut anything out for the people that are into setups. Stay Rad. (My most important setup video ever is coming soon)
I’ve made the same sticker mistake in reverse order. My trucks were Ace and I put an Indy sticker on the board. Very first session the Indy sticker scraped hallway off. I felt the Indy demons could sense the mistake I made. 😂
@@AdventuresInSkateboarding I also just recently drilled a deck to use sex bolts with some rails and the screws from the bolts don’t fit the countersunk area on the rails. 🤦🏻♂️
@@AdventuresInSkateboardingThe screws it came with had a rounded head and I saw the rat nutz have a cone shaped head so I ordered some of those on @decomposedskateboards website. Hoping those will work. They look more like a regular screw that comes with the rails.
Awesome video! I am 50 and just set up a Winkowski Dope Planet as a cruiser and one of the rails has a rattle. I just used the wood screws. Do you think sex bolts would help and if so, where did you get yours? Thanks buddy
@AdventuresInSkateboarding thanks for this- new sub, loved the video and especially the session at the end. Started cruising again a few days and am loving getting back into it- cheers
Welcome back to skateboarding. I can't explain how much starting to skate at 41 did for me. I can only say at 47 it was the best decision I ever made for my personal well-being. Stay Rad
They were bought from FrameRateMerch dot com. The website is closed until Black Friday starts. They don't always have them. I love them thanks for asking.
@@philkavanaugh the issue was I didn't check the bolt pattern. The board has the old school bolt pattern and ACE trucks doesn't make a base plate to match. It is in me for not checking. But we solved the problem. Then went back after and got the correct wooden risers pad and swapped out with different Indys so I could put these Indys back on the SALBA where. Love that Salba setup didn't want to change the way it rides. Stay Rad Sir.
Yeah I seen that. You said give it a guess and no cheating haha. If the sticker was still driving you crazy, you could prob drill the baseplate out. I seen a couple Indy/Ace hybrids on fuckwithyourtrucks too. Could be worth a shot
This a LONG detailed setup video and mistakes were made and corrected along the way. I completely understand that this video is not for everyone. However, to the skate Nerds like me and the new skaters out there, I hope you enjoy.
Please engage in the comments. Conversation and feedback are always great.
You made my morning bus to work more pleasant, thank you Sir!
Well there is no higher complement than that. 🤣
In Korea I would listen to the nine club in the train. You can go a lot of places during the Mike V interview.
Awesome info on the rat bolts didn’t know that was even an option when putting on rails
It is OG. SK8kings has the best ones. A lot of their rails and skid plates come with them. I by about 20 at a time. I think that is 4 or 5 bags. Worth it to me. Thanks for checking it out and the feedback. Really appreciate you being a part of it.
Loving the setup! And the board wall!
Appreciate you checking it out. Hopefully it helps someone or the skate nerds like me enjoy it. 🤓
Rad video, I like the long format. Keep shreddin 🛹
Appreciate you Paulie. You made it fun for me to watch the video and interact in the chat. Without people like you it is just me and the 🐅🐈⬛🦁
NICE, BEER & BOARDS 🤘🤘
Appreciate you checking it out. I ride this one a lot. Stay Rad
Wheels on your truck make a great grip roller ...js lol 🔥
For sure. Thanks for checking it out.
These are My faVorite type of videos. You did a sick job setting this up and i absolutely love the board 👍🏼
Appreciate all the support over the years. 🙏
I love this video,I ain't skipping shit, feels like I'm hanging with a friend who's sharing some knowledge with me while setting up a board. Meanwhile I'm over here getting ideas on building my next board ( I Wana recreate my first skateboard) I really like your setup,I'm sure I've said this before but if you're ever out my way ( Virginia, Fredericksburg area) hit me up I'm down to shred. Kids and health issues prevent me from traveling to far but there's some skateparks close enough (30 miles or so) and I got a long ass paved driveway and a shin high box and plans for a mini ramp after christmas.cheers bubba!
Will definitely hit you up. I don't get up that way much but do find myself in VA Beach and Norfolk often so not a bad drive from there.
That is rad that you enjoyed the video. I honestly question if I should upload it. Feedback like this makes it worth it.
What was your first board? I am building a board that came out before I was born that will be sharing soon.
Stay Rad Sir.
Nice and chill setup video
Was it too chill? I don't think I realized how chill it was until it was completed. I hope people take some time to slow down and enjoy it if they are into setups. Stay Rad
The way you build your boards you would be considered a purist by not mixing certain parts. Again this was cool to watch.
Appreciate you in the chat during the premiere. I definitely like to keep my companies and distributers as group as possible. I think I believe that the components are just made to work together best. I am a weirdo 🤣🤓.
Stay Rad Sir.
The same thing happened to me when i got back int skateboarding after 30+ years
I did my first old school setup (Rob Roskopp Reissue Face Deck) I got the old school yellow Riser pads not knowing they changed size on the reissue deck. Cool setup my twin brother from over the pond 🛹
What got me is a lot of my G&S reissues have the new bolt pattern. I run ACE on my Neil Blender boards. But lesson learned. I did get the right size wooden risers for it and changed it out with different Indy's so I could get my salaba back the way I like it.
I am a nerd hahaha. Stay Rad Sir.
@@AdventuresInSkateboarding you too
💯 new trick video coming soon.and a 1970s skateboard setup and skate.
@@AdventuresInSkateboarding Cool i've got the notification bell on ;)
@@50PlusSk8r soo Rad. Appreciate you
Great tutorial
Appreciate you checking it out. I am setting up boards anyway so mine as well film it now and then. Could do every set, that's all this channel would be 🤣. Because I have an addiction.
New trick video late tonight or early tomorrow. I am going give my self one more session to see if I can get it better.
Stay Rad.
@@AdventuresInSkateboarding You're Welcome!
Really enjoyed this, first time iv even seen a sticker book, if you get some more stickers made I'll have one 😊
I had a big ziplock full full of stickers. It was a mess. I asked the wife for sticker books and she came through. I like having them organized. I don't know why I love stickers so much. Seems kind of silly at 46, 3 days from 47, but man I like them.
I will get more stickers made next year and let you know.
Appreciate you checking it out. It is a really long video. I didn't want to cut anything out for the people that are into setups.
Stay Rad. (My most important setup video ever is coming soon)
@@AdventuresInSkateboarding looking forward to the next video 🤙
Me too 🤣
Id rock a 40+ skate sticker if you do another run
I would definitely like to get some more made. Maybe after the New Year.
Stay Rad
I’ve made the same sticker mistake in reverse order. My trucks were Ace and I put an Indy sticker on the board. Very first session the Indy sticker scraped hallway off. I felt the Indy demons could sense the mistake I made. 😂
🤣🤣🤣🤣 that's awesome. Mine is under the grip as permanent reminder to always check your bolt pattern. 🤣
@@AdventuresInSkateboarding I also just recently drilled a deck to use sex bolts with some rails and the screws from the bolts don’t fit the countersunk area on the rails. 🤦🏻♂️
@@bed56420 oooooh man that is rough. What did you end up doing?
@@AdventuresInSkateboardingThe screws it came with had a rounded head and I saw the rat nutz have a cone shaped head so I ordered some of those on @decomposedskateboards website. Hoping those will work. They look more like a regular screw that comes with the rails.
Yes the rat nuts don't use a wood screw it is just a machine screw. Let me know.
I love a good tutorial 🤓
Skate Nerds Unite🤓
👏👏👏👏
Just in the moment for the longest board setup ever 🤣
"DAMMIT .. These bastards didn't give me a sticker! WTF! WHERE'S MY STICKER!?"
If I order something and there is no sticker I definitely remember that 🤣
Awesome video! I am 50 and just set up a Winkowski Dope Planet as a cruiser and one of the rails has a rattle. I just used the wood screws. Do you think sex bolts would help and if so, where did you get yours? Thanks buddy
Actually sorry, I had missed where you mentioned that. You got them off an old board and looks like I could order from Skate Kings. Cheers buddy
SK8kings definitely has the best ones. They absolutely will prevent the rattle.
Let me know if you need anything. Stay Rad.
@AdventuresInSkateboarding thanks for this- new sub, loved the video and especially the session at the end. Started cruising again a few days and am loving getting back into it- cheers
Welcome back to skateboarding. I can't explain how much starting to skate at 41 did for me. I can only say at 47 it was the best decision I ever made for my personal well-being. Stay Rad
What were the sticker books called
They were bought from FrameRateMerch dot com. The website is closed until Black Friday starts. They don't always have them.
I love them thanks for asking.
SKATEBOARDING IS N🚫T A CRIME
💯💯💯💯
To wide monster truck style in the rear? That's my early guess
Sorry, what are you referring to?
What the issue was with the new trucks. I've done that with a fishtail board before thinking "it's a 10" deck right?"
@@philkavanaugh the issue was I didn't check the bolt pattern. The board has the old school bolt pattern and ACE trucks doesn't make a base plate to match. It is in me for not checking. But we solved the problem. Then went back after and got the correct wooden risers pad and swapped out with different Indys so I could put these Indys back on the SALBA where. Love that Salba setup didn't want to change the way it rides.
Stay Rad Sir.
Yeah I seen that. You said give it a guess and no cheating haha. If the sticker was still driving you crazy, you could prob drill the baseplate out. I seen a couple Indy/Ace hybrids on fuckwithyourtrucks too. Could be worth a shot
@@philkavanaugh I will keep it as a reminder to be smarter 🤣