Welcome, truck enthusiasts! 🌍 Explore RAZBORGRUZ channel for hands-on repair guides, truck reviews, tutorials, accident recoveries, and more. They create this content out of pure passion go and check them out! ruclips.net/channel/UC8l6LR-6eDSKLmKRqSFNUGQ
Могу вам как слесарь сказать что сборка этого,да и любого двигателя не особо трудная задача! Главное иметь руки из нужного места,голову на плечах и вообще любить эту работу! Гораздо более тяжёлая и напряжённая работа у токарей,фрезеровщиков и расточников которые делают подгонку и проточку некоторых деталей. В видео видно,что используются новые гильзы,поршни и вкладыши,но ничего не показывают что делали с коленвалом и головкой цилиндра,а при таком ремонте вполне возможна расточка шеек и установка ремонтных вкладышей. А в головке цилиндров замена маслосъёмных колпачков и замена или прирезка и притирка клапанов к седлам а так-же замена направляющих клапанов.
My former brother in law did this back in the day. For him, it was a passion. He also drag raced his cars. Miss him and his high skills in engine building. These people are getting harder to find now.❤
@, he was an exceptional person, cared about people, exceptional business person and always helped people out. I miss him terribly. You just don’t find many people like that in today’s world. You are kind to speak of him as you do. Not a better engine builder in this state has ever been. Only one other person I know that may have been any competition and I knew him in high school. He is still alive. Good Joes are what these kind are often called.
Masterfully done! A joy to watch this technician ply his skill. I can only hope his employer recognizes his contribution and value him with a nice paycheck. Well done dude!
2:44 seen a kid once put the engine mount upside down at that stage and cracked the block using a rattle gun upon installation to save time 😂 Expensive mistake for him and his boss 😊 When Paid by the hr No need to rush 😅
Here’s YOUR MAN CARD. The bearer of this card is authorized 1 free Beer and a lap dance of his choice. What a feeling of accomplishment when you crank that Man up ! We had 2 in the yacht I worked on. 🍻
Consulta me gusto como lo arman, lo extraño es por que no usaron un torquimetro en los ajsutes de bancada del cigueñal y el resto. El resto muy bien como lo arman y montan. saludos
Each component, and each assembly step has multiple failure modes. Each Subsystem has imperfect performance aspects, each system has erroneous design parameters. Each engine has holes in its capability envelop ... and yet it is truly a thing of beauty. A testament to man's ambition. Kudos.
Best part? When you start the engine and everything is perfect! No rare sound or clicking etc Satisfaction 100% You sleep like a baby And best part? You get money doing this beauty job 👍
محرك مان الألماني ومرسيدس محركات الديزل جوده عاليه ومتناهية الاداء لمن جربها أنها جودت الصناعه في العالم بكافة أشكالها وأنواعها صغيره وأم كبيرة وبالأخص المحركات القديمة
no , just an understanding of how it works , engine building is really basic stuff if you know how it works and have a pair of hands and an eye for details.
Its a normal work for a professional carmechanic like him , me and thousands of others who learned her profession oder years . After 2 of the same engines he is able to mount the third with closed eyes...
As a Master Mechanic for well over 45 years, I was curious as to why flywheel was not resurfaced, and why were clearances not checked on all rod and main bearings prior to assembly, piston ring end gaps as well? Either these steps were not done, or possibly not shown due to time constraints on video, but rest assured they are absolutely necessary when rebuilding any engine. Also wondering why a nice coat or two of high temperature paint couldn't have been applied to block etc.Sevetal more issues but I dont want to make this a rant just a professional observation. Overall good video, but numerous key steps missed in my opinion.
After watching this, now I want to go to a trade school and learn this kind of mechanics. Not just diesel, but gas as well. I was told there is good money in this kind of work.
there is only good money in this work if you own the repair shop and do the work. if you work for somebody else you will make about as much as a grocery store flunky
Depends heavily on where you live and your skill level, in larger cities it’s not uncommon to earn 100k plus as an automotive technician. Not the easiest job by any means, but if you’re willing to work hard, you can do pretty well
German engineering with an ace Russian mechanic sounds like a good combo. You demonstrate nice high quality work and we can see that you have a clean organized shop. I am actually more curious to see a rebuild of a Russian made diesel engine of similar horsepower and size. I would wonder if the injection system on a Russian diesel is computerized or mechanical.
This ain't a car on.your driveway. Did you.see the size.of the bolts? I'm pretty sure they know what they're doing considering they LITERALLY make the engines.
Magnifique ! Exceptionnel et excellentes compétences, maîtrise totale du métier et des outils. Bravo. Excellente video à faire tourner en boucle pour ceux qui aiment leur métier ou qui voudraient faire carrière dans un métier de passionnés. On attend dans tous les domaines ce genre de personne et même, dans de grandes entreprises, merci MAN, dans tous les domaines. Merci. Excellent !!!! Bravo !!!
Поршни сажает в вертикальном положении блока. Или я стар, или технологии изменились. Скорее я отстаю от времени. Всегда поршни опускал в горизонтальном положении блока цилиндров. 😮
Welcome, truck enthusiasts! 🌍 Explore RAZBORGRUZ channel for hands-on repair guides, truck reviews, tutorials, accident recoveries, and more. They create this content out of pure passion go and check them out! ruclips.net/channel/UC8l6LR-6eDSKLmKRqSFNUGQ
😊
Hola saludos que motor ese isuzu o que modelo es
A
I'm joining your garage
I'm macinic
Приятно смотреть на работу профессионала. Успехов, СЕРГЕЙ!
Собирать из новых чистых деталей в оборудованном гараже - сплошное удовольствие 😊
I was a transit operator for 37 years and our mechanics worked on Man engines and they did a great job.
Somehow it's mesmerizing to watch a professional doing a perfect job!
For machines to run smoothly, the parts must be perfect.
hello
Great to see a professional at work. I was a Mercedes Benz tech for twenty years. Nice to see someone on youtube who is a real expert. Great job
You can tell he's rebuilt many of these engines. Very nice work.
Могу вам как слесарь сказать что сборка этого,да и любого двигателя не особо трудная задача! Главное иметь руки из нужного места,голову на плечах и вообще любить эту работу! Гораздо более тяжёлая и напряжённая работа у токарей,фрезеровщиков и расточников которые делают подгонку и проточку некоторых деталей. В видео видно,что используются новые гильзы,поршни и вкладыши,но ничего не показывают что делали с коленвалом и головкой цилиндра,а при таком ремонте вполне возможна расточка шеек и установка ремонтных вкладышей. А в головке цилиндров замена маслосъёмных колпачков и замена или прирезка и притирка клапанов к седлам а так-же замена направляющих клапанов.
My former brother in law did this back in the day. For him, it was a passion. He also drag raced his cars. Miss him and his high skills in engine building. These people are getting harder to find now.❤
What happened to him if you don`t mind me asking?
@, he died of a combination of liver failure and complications of rheumatoid arthritis. It is sad and hard to see him gone. He’s not suffering now.
@@markphilpot8734 He would appreciate and love you speaking so kindly of him. That’s awesome
@, he was an exceptional person, cared about people, exceptional business person and always helped people out. I miss him terribly. You just don’t find many people like that in today’s world. You are kind to speak of him as you do. Not a better engine builder in this state has ever been. Only one other person I know that may have been any competition and I knew him in high school. He is still alive. Good Joes are what these kind are often called.
@@markphilpot8734 The world could always do with more Joes. Appreciate you sharing
Masterfully done! A joy to watch this technician ply his skill. I can only hope his employer recognizes his contribution and value him with a nice paycheck.
Well done dude!
Всегда уважал таких людей удачи вам и всех благ
а что такого то? он что то изобрел? проявил смекалку? Эта работа - для робота! Делай одно и тоже по инструкции и всё
Unbelievable! Over 1.5 million kilometers and still kicking out 430 horsepower? This video is pure gold for any gearhead!
This man knows his shit! Right on, brother. I think he's done this once or twice.
@@RestorationGirl I think he did it many times.
el operario se le ve una gran experiencia!!!
Sergei nailed it,as usual. Molodec Serjoza.
Топливная система Коммон Рейл?
@@Migel-e4j да
2:44 seen a kid once put the engine mount upside down at that stage and cracked the block using a rattle gun upon installation to save time 😂
Expensive mistake for him and his boss 😊
When Paid by the hr
No need to rush 😅
That's probably what happens on the job less than 10% of the time. The other 90% is scratching one's ass thinking about what the next step is.
Here’s YOUR MAN CARD. The bearer of this card is authorized 1 free Beer and a lap dance of his choice.
What a feeling of accomplishment when you crank that Man up ! We had 2 in the yacht I worked on. 🍻
Nothing like the feeling of excitement putting all those new boxed parts together. 😁
But it doesn’t look anything like the engine in the thumbnail. 😕
It's a truck engine. The thumbnail is probably from a boat engine build or ai generated.
Click bait. 😂
It's called clickbait
get click baited 💀💀💀
I have never seen such large torque wrenches.
That's one heck of an experienced mechanic wow
Proper engineers! So rare these days! A compleate joy to watch them!
I love people like this
Consulta me gusto como lo arman, lo extraño es por que no usaron un torquimetro en los ajsutes de bancada del cigueñal y el resto. El resto muy bien como lo arman y montan. saludos
Доворачивать болты на глаз,верх проффезионализма!😂😂😂
Угломер "ДОРОГОЙ" стоит 3500,электронный по-моему около 8000.
Each component, and each assembly step has multiple failure modes. Each Subsystem has imperfect performance aspects, each system has erroneous design parameters. Each engine has holes in its capability envelop ... and yet it is truly a thing of beauty. A testament to man's ambition. Kudos.
Автосервис находится в России Подмосковье компания RAZBOR GRUZ.мастера зовут Сергей.
Masters !
Алексей компания у нас Инфорком! RAZBORGUZ и MotorsTruck каналы на которых можно найти подобные видео
à quand la comparaison des fesses de nos femmes
Puede sergey pero trabaja bien para que !!!!
Best part?
When you start the engine and everything is perfect!
No rare sound or clicking etc
Satisfaction 100%
You sleep like a baby
And best part? You get money doing this beauty job
👍
It reminds me when I was an apprentice working on ship engines like the Queen Mary and the Queen Elizabeth.
Вот до чего дошло прогресс меня уже и там и тут показывают😂
Бро спиздили да
Самый недооценённый комментарий 😂
спиздили видос
да , это уебан собирает ман
Серёга ты когда вернеш мне инструмент?😂
محرك مان الألماني ومرسيدس محركات الديزل جوده عاليه ومتناهية الاداء لمن جربها أنها
جودت الصناعه في العالم بكافة أشكالها وأنواعها صغيره وأم كبيرة
وبالأخص المحركات القديمة
When you need a hoist to set in the crank shaft.
It has to be perfect, otherwise it’s a catastrophy, there’s nothing in between. So he’s doing his job like millions of others.
Great Job! How much is the weight of a truck motor?
I should think so too, the guy is a fitter and he's doing his job of fitting it together as a fitter, fitters fit😂😂it's not hard
This man has the memory of an elephant
Times 4
no , just an understanding of how it works , engine building is really basic stuff if you know how it works and have a pair of hands and an eye for details.
Its a normal work for a professional carmechanic like him , me and thousands of others who learned her profession oder years . After 2 of the same engines he is able to mount the third with closed eyes...
isn't a joke 😢
As a Master Mechanic for well over 45 years, I was curious as to why flywheel was not resurfaced, and why were clearances not checked on all rod and main bearings prior to assembly, piston ring end gaps as well? Either these steps were not done, or possibly not shown due to time constraints on video, but rest assured they are absolutely necessary when rebuilding any engine. Also wondering why a nice coat or two of high temperature paint couldn't have been applied to block etc.Sevetal more issues but I dont want to make this a rant just a professional observation. Overall good video, but numerous key steps missed in my opinion.
After watching this, now I want to go to a trade school and learn this kind of mechanics. Not just diesel, but gas as well. I was told there is good money in this kind of work.
Let's hope they still exist!
there isnt good money in this at all , go learn how to lay bricks or plaster ,,,
Yes, a lot of money, but you also have to pay a lot to learn and you have to be very good at learning.
there is only good money in this work if you own the repair shop and do the work. if you work for somebody else you will make about as much as a grocery store flunky
Depends heavily on where you live and your skill level, in larger cities it’s not uncommon to earn 100k plus as an automotive technician. Not the easiest job by any means, but if you’re willing to work hard, you can do pretty well
This man is an artist this such a pleasure to watch, and the sweet sound of success at the end! I love building engines too!
After assembling my daughters Ikea bedroom set, I feel I can do this🤔
Eres un experto, mis respetos para ti amigo
역시 MAN트럭은 남자가 맨들어야 간지남 ㄷㄷ
German engineering with an ace Russian mechanic sounds like a good combo. You demonstrate nice high quality work and we can see that you have a clean organized shop. I am actually more curious to see a rebuild of a Russian made diesel engine of similar horsepower and size. I would wonder if the injection system on a Russian diesel is computerized or mechanical.
Thank you for uploading showing the care it takes to rebuild an engine of close to a million miles use,we need future mechanics desperately
You would never see a woman do this kind of work!
Sergey you do great work Boy 😂 ❤
Мдааа видно что Сергей не первый раз собирает моторы . Класс 👍
Outstanding workmanship!
This is a really neat video, but it would have been a lot better if the text and video were in sync.
❤The mechanic is awesome. 👍💯
A lot of diligent work.
Nice professional work! Purring like a kitty cat. EXCELLENT work.
Great i failed my diesel test!!you guys cool....filler gauge...👍👏🖐️
Super pro !!
Quality design meets quality maintenance.
Nice work young man.
Bener 2 luar biasa para pria ini salut buat mereka 🙏🙏🙏
This was clearely an MAN engine and not a Scania...
Amazing Job 👏
عمل أحترافي رائع أحسنت العمل 👍
А вылет гильз промерить???
chapeau bas au mecanicien !
Check the numbers on the main bearing caps to make sure they didn’t pack the wrong one. White lithium on the bearings and cam shaft works 🤟🏽
Used to drive MAN trucks extremely quite engine in fact as quite as most cars
Sangat cerdas mister.sehat selalu.
エンジン本体はどのように作られているのでしょう？
What skills this is just assembling
These engines are amazing.
Crazy that its only two bolts on the main caps
Incredible technician !!! But, kudos always for the geniuses that designed all these motors.
TALENT BEYOND HUMAN EXPRESSION AND WORDS!
Keep rebuilding them. I'll keep wearing them out
Te felicito .PQ trabajas muy limpio.y así es la mecánica. De verdad
The captions are hilarious!
Смотрели на профессионализм парня с открытым ртом.!!!!! 👍
Я тоже в ужасе от это профи. Держаться надо от таких по дальше
Big engine work is easy but heavy work is required.
Nice working
Pekerjaannya sangat bagus dan rapih tanpa banyak melibat kan orang sy sangat mengapresiasi kerja anda 👍👍👍
Safe to say that was a man’s job! Pretty amazing
هاذا من مشاهير. هاذا الفن الحقيقي 🌹🌹🌹🌹
Holy breaker bar, stretching those head bolts!
This ain't a car on.your driveway. Did you.see the size.of the bolts? I'm pretty sure they know what they're doing considering they LITERALLY make the engines.
@@chrisacres Yes. Head bolts are made too stretch and only be used once or twice
I was a Volvo truck mechanic back in the 90’s. Did lots of engine refurbishment and rebuilding.
Jeeeez look at the size of that crank!
I could hang out there all day.
Nice warkig,,
❤❤❤❤❤
Magnifique !
Exceptionnel et excellentes compétences, maîtrise totale du métier et des outils.
Bravo.
Excellente video à faire tourner en boucle pour ceux qui aiment leur métier ou qui voudraient faire carrière dans un métier de passionnés.
On attend dans tous les domaines ce genre de personne et même, dans de grandes entreprises, merci MAN, dans tous les domaines.
Merci.
Excellent !!!! Bravo !!!
Best skills 👌
ผมก็เก่ง สามารถรื้อถอดชิ้นส่วนที่เขาประกอบให้เป็นเศษเหล็กได้ทุกส่วน แต่จะประกอบกลับให้เป็นเครื่องยนต์นั้น หมดความสามารถ 😅😅😅
😮 это фуфель для идиотов,и ещё где в раше?
Impressive. Not many mechanics can do this kind of work.
Це справжній майстер бо тільки так вміло і точно збирати такі двигуни може тільки той хто має професійний досвід.
Increíble hacer esa labor con tanta cantidad de piezas,muy profesional
👍👍 mantap Salam dari indonesia 🇮🇩
Поршни сажает в вертикальном положении блока. Или я стар, или технологии изменились. Скорее я отстаю от времени.
Всегда поршни опускал в горизонтальном положении блока цилиндров. 😮
Good
Hard working man.
Ман 1991 года... По рассказам дедка одного на этой тачке пробежали пости 15 миллионов километров). Автомобиль в этом году увезли на металлалом (((
I anchored on your technique 💪💪
Good beautiful 🤩🤩
bravo 100%
Excellent