AVIOS (PNF) C-130 V2 US Coast Guard Scale Turboprop (1600mm) • UNBOXING • (English/Français 4K)

AVIOS (PNF) C-130 V2 US Coast Guard Scale Turboprop (1600mm)
Buy yours : hobbyking.com/...
Instructions manual : cdn-global-hk....


❌ Book CG 65mm : CNHL 4S 2200 40C 275gr placed???
📏 Triple Rates in millimeters (my own low / book’s low rates / 100%) :
Ailerons : 8/10/20?
Elevator : 10/15/25?
Rudder : 8/10/30?
Inboard flaps : 11/22
Outboard flaps : 30/45
⏱️ Flights & remaining voltages :
-Maiden (filmed) CNHL 4S 2200 40C 275gr :
Improvements of the Avios C-130 V2:
• Two brand new hi-viz, vibrant and lightweight color schemes
• Improved direct pushrod rudder linkage with rear-mounted rudder servo
• Flap geometry has been improved to achieve more movement
• Reduced wiring and no surplus deadweight in airframe
• A reduction in overall weight giving much improved slow-speed handling characteristics
Features:
• A beautiful scale model of the classic Lockheed C-130 turboprop
• Working flaps, retractable landing gear with door sequencer, landing lights, nav lights, working cargo door
• Factory-installed motors, ESCs, servos, wiring, and quick connect/disconnect wing electrical connectors
• Scale 4 bladed propellers
• Separate 5V-3A BEC unit
• Airframe beautifully molded in tough EPO foam
• Fast, and easy to assemble, no glue required
Specs:
Model: AVIOS (PNF) C-130 V2 US Coast Guard Scale Turboprop w/Retracts & Flaps
Wingspan: 1600mm
Length: 1195mm
Flying Weight: 2350g (inc battery)
Motors: 4 x 2627-1000KV brushless outrunner
ESC's: 4 x 18A brushless (non BEC)
BEC: 5V-3A
Servos: 14 x 9g
Propellers: 4 off 6.5"x5" 4 Blade
Channels: 7 required, 8 is advisable for mixing the flaps
Battery (Required): 2200mah 4S (14.8V)
Included:
1 x AVIOS C-130 V2 US Coast Guard EPO airframe
4 x 2627-1000KV brushless outrunner
4 x 18A brushless ESC
4 x 6.5"x5" scale 4 blade props
14 x 9g servo
1 x Set of servoless retractable landing gear with door sequencer
1 x Working cargo door with cabin light
1 x LED daylight visible nav-light system
1 x Set of scale detailing parts
1 x Set of pushrods and connectors.
1 x Set of assorted screws
1 x Quick-Start set-up guide
Required:
7-8ch channel or more transmitter and receiver
4S (14.8V) 2200mAh LiPo battery w/XT60 connector
Suitable LiPo battery charger