How Fishing Rods are Made
HTML-код
- Опубликовано: 29 ноя 2016
- In this classic In The Spread instructional video, watch as Blackfin Rods owner Allen Winchel takes you through the exact process of how a fishing rod is manufactured from start to finish.
Learn more about In The Spread here: www.inthespread.com
Visit www.inthespread.com to watch this and many more sport fishing videos to learn from some of the world's best fishermen.
You may purchase this or any of the videos from the In The Spread series here: amzn.to/216b1MV
The In The Spread project is produced in association with Full Throttle Media. Спорт
Thank you! Retired rod builder watching it done by professionals
Thanks for the comment, Barry. It is nice to see the passion that goes into well made products.
what a great video . thank you for taking the time and explaining the whys and hows . best video ive seen yet on rod building .. thanks again
It is indeed a pleasure to make videos that get into the nitty-gritty. Thank you for watching and your kind words.
Excellent video , very informative and well done . I now have an understanding of how a rod blank is made .
Thanks a lot Andrew
Great work. Informative and entertaining. I respect how much detail is put into the different rods.
It is definitely a craft.
Such a great craftsmanship, so many stages . Beautiful work man !!
Thanks so much for the comment. When you put your all into your work, it shows.
cool work man👋
thank you very much my brother for making this video..i understand
friends from Indonesia are here to watch my friends make fishing rods
My pleasure. Thanks for commenting and watching from Indo.
Thanks for the upload guys.i currently have my late fathers old Snyder glass mt120 8w getting restored and can't wait for the end result. Sure it costs more but I love bringing quality things back to life. I could of watched an hour of this. I would like to see more of the custom thread work . Thanks again 👍
Where do yo go to restore rods?
I really appreciate your response. Quality products take more time and do cost more. But, they last longer. Great to hear about your father's rod. Best of luck to you.
@@okayokay6911 so I'm a spray painter by trade. I stripped and resprayed my blank with gloss black and aqua marine pearlescent clear coat. Then sent to a local bloke who I heard of through a mate in a local fishing club. He does custom builds... Re running eyelets Re doing grips etc etc he is in far north Nsw if you're interested I can foward some details 👍
That was captivating. I always like knowing how things work...not just using them. Thanks
Thanks for watching
First time watching rod manufacturing..so much time dedication hard work.. excellent
Thanks. It's a real craft what they do.
In The Spread tog
Wow! Whole new respect for fishing rods! I will not complain about the price anymore!
a good rod is worth every penny
WOW 🤩 thanks so much for making this video. I always wondered how it was done.
Thank you for watching! Knowledge is power.
Made with great pride and it shows in your rods. Thanks for sharing this awsome video .. ill be buying one soon.god bless
Thanks Frank. All the best to you.
You are so blessed with such knowledge.
Blessings to you
Zdecydowanie wspaniała praca mistrzowskie blanki🙏
Dziękuję! Ci faceci wkładają dużo uwagi w każde puste wędki.
Pretty interesting trade. Looks like a lot of fun making fishing poles.
It is a skill that escapes most.
Excellent , love your detailing , superb, thanks
My pleasure, thanks
Tight lines with these amazing rods!!!
Thanks, Paul
Wow. At the age of 68 I learnt that each of my old fishing rods is a masterpiece. I almost had a heart attach when you searched for the sweet spot. Amazing. Even the compilation and the binding. I once paid R 6 000 for 2 rods for myself and another R 6 000 for 2 rods for my son. They now have a very special spot on my home. Thanx guys for a very informative video.
Our pleasure. Thanks for the kind words. Quality certainly carries worth.
Enjoy watching, you guys puts so much effort 👌, very skilled job well done 👏
Ahmed, thanks for watching
Excellent teacher .today ive learned new artwork .wonderfull knowledge mate .your triple excellent honest teacher .grazie
Wow, thank you. You are kind beyond words.
Beautiful work and loved it. How i wish I had one of them rods... lol love it all
We appreciate your comments. Thank you
Beautiful Work Allen
Allen is an amazing fisherman and rod builder.
Nothing like a good custom Rod!
You really get what you pay for. Quality first
Wow beautiful workmanship. Hopefully my next
Great rods for sure.
Very nice video big up from Jamaica 🇯🇲🇯🇲🇯🇲
Peace to ya
a very good documentary on hand crafted fishing rods.
Thank you
Thanks for this - nice work!
Hey, thank you, Anthony
That's Awesome, always wondered how it's done, thank you! keep making em!
Craftsmanship is lovely to watch.
‘Ki
Love this video, thank you!
My pleasure. Thanks for watching
I love fishing.
Hope one day,I had this fishing rod.
Good information for us users....thank you guys
It's a pleasure for us to help.
Nice custom the road fishing👍👍👍, I like it
Thanks buddy
great video, thanks for sharing !
Thanks. What's up in Amsterdam
Iam very exciting to do fishing and watching realated such things.very nice🔥🔥🔥
Thanks for watching. If you want to see more videos on how to catch various fish, visit www.inthespread.com
Awesome video..
It was great to know how much efforts and dedication is there behind any fishing rod we use....
Thanks for making this marvelous video.
You are more than welcome. A good craftsman can do wonders.
@@InTheSpread Thanks a lot for cheering up.. 🎣😍🎣😍☺🤗🤗
Well, I don't make rods, but some times .. when I have some free time; I try making some wooden lures for my own use!! 👍🎣👍😁🤗
@@sanjeetpendharkar5340 my pleasure
@@sanjeetpendharkar5340 I would like to see what you are making. Are you catching fish on your own lures?
Hallo Mister ..,im from Indonesia,i like this video... thank you
I thank you for watching
Fascinating, great craftsmanship 👍🏻
Passion for your work always shines through. Thanks for watching.
I’m a lifelong fisherman, 59yrs old (Australian/beach/surf/rock fishing) and have about a dozen or so custom rods in the 10’ - 13’6” range. They are anywhere between 20-40yrs old, and all have been refurbished/rebuilt at least once, and in a few cases about 5 times over the period of time. I was aware of the skill and craftsmanship that went into finishing a rod, (butt/reel plate/guides/thread/epoxy) but not the process of producing a blank. When you combine all the craftsmanship and skills, a custom rod is a very undervalued commodity. Much the same as a custom surfboard 🏄
@@markmay184 bam, you are correct
Wow amazing 💕💕 very nice rod factory 👍👍👍
Thanks for the comment. Blackfin Rods runs a nice shop, for sure.
Very good information sir thanks
Fascinating, so well explained. Meticulous products.
Thank you. Getting below the surface in analyzing products is a passion of ours.
This is awesome footage and thanks for the info... Now I know too, very informative and educational...
Our pleasure
Amazing work 😍
My site is www.inthespread.com
Thanks for watching 👀 🙂
Amazing video , clear explaining for every and each step 💪, big like from Egypt 😘
Great you liked it
That is an awesome video and I wish I had the skill those women and everyone else behind building rods at your place. I've built one rod so far and repaired a few after that. It is a very lengthy time consuming tedious task. And as a perfectionist every little bubble or crossed thread drives me insane. And now buying any rods or seeing the 400$ rods my buddy who does guides buys I see every imperfection and I hate it. So thanks for the showing of how it's done from the very start to finish. That was amazing
Thank you for your kind words. I always enjoy watching real crafty people work their wares.
:)
:)ရရ
ရ:)ထ
လ
ထယ . ာ
ာ:)ယ:) Z
Xx k
;:)
:)
?
B ရ
ယရ
'
:):
ယ
:)
C :)
X x
:) .
Excellent video..
Thank you sir
Great work, congrats, i love manufacture working.
Thanks Michal! I love this kind-of work, also. It is so fascinating 👏🏼 😊
Wow that's Awesome Thank you for the Information.
Our pleasure. Thank you for watching
Du très beau travail, merci pour votre vidéo
our pleasure
Great video thank you.
Much appreciated, John
I’ve been wrapping rods for 35 years. I’ve never watched how blanks are made. One way they’re made.
It's cool to see the process. I never knew until making this video. Thanks for watching.
Amazing nice very strong rod
Thanks for the recognition.
The video and description are quite useful
I am happy you like them. Thank you for watching.
This is awesome I like to watch this video this rod look strong thanks for this video👌👌👌👍👍
Thanks for the comment
Wow I love the fact you make your own blanks then the build is fantastic! At one time here in Houston they built Allstar Rods then later Castaway Rods in Conroe Texas all have since gone overseas but I'm not sure if they built their own blanks? Great Craftmanship 👍
Thanks for watching, Michael. I agree with the sentiment about so many manufacturers moving overseas. Keep not here and keep it quality.
Nice fishing rods - great video !!!!!!!!!!!!!!!!
Thanks D. I appreciate your sentiment. 💥
i have fished my whole life and never seen this done great video thank you
Glad you liked it
Great craftsmanship….🎩🎩
Good stuff, for sure 👏🏼
Very very wish you best of luck uncle
Thank you my friend
I've had a couple of custom surf rods made over the years. Yes, they're more expensive than a typical "off the shelf" rod, but I have no regrets about putting out the money. You get the blank you want, the thread color, guide type, handle, etc. Granted, you definitely want someone who knows what they're doing, but most decent rod builders have notable reputations in the local fishing community. If you're an avid fisherman, and have the financial resources, I'd recommend at least one custom rod in your arsenal. Gives it a nice, personal touch.
Damn good advice
;;;;(
Ppllllllllllllp I'm
Lpp
L
Hii Iam from malang indonesia, i like your vidio, i like fishing good job bro
What's up in Indonesia? Thanks for checking us out. There are plenty more fishing videos on our site www.inthespread.com 😀
I found a brand new Black fin rod w 2" of the tip broken off, I retipped it and like it alot. That's why this is a $212 rod as opposed to a $36 Dawia. It's a process.
Well said!
Awesome Technology
thank you
Great Video ! ...
Thank you, Robert
Thanks for sharing
It's a pleasure to make this information available. Thank you for watching.
Thank you sir for your video
Thanks for watching
Hand made...good job 👍👍👍👍👍
I like it,,,😀
Thanks a lot
Que buen producto de primera saludos desde Argentina
Qué bueno que te registres desde Argentina. Gracias por el reconocimiento.
i had no idea how they were made great vid
Thanks Diego. I appreciate your words.
And Then ready to catch a big fish,nice video
for sure
Tôi thật đậm mê những công nghệ của ngày và những cần câu này ở Việt Nam thật đắt đỏ
Biết cách làm cần câu thật thú vị. Tôi đã không có ý tưởng cho đến khi làm video này. Tất cả chúng ta cần phải cập nhật các công nghệ hiện đại. Cảm ơn vì đã theo dõi và hãy đăng ký nhé.
That's a profesional work.
Indeed
Sir
Thanks for the information we definitely need to get about fishing rod. How is that strong. How much people working on one fishing rod. Your work is so awesome for Fisher. Thanks to you and your teem or family
It only takes one person to make a custom fishing rod. The work is very precise, if you want a really nice strong rod. Tight lines to you and thanks for your comment.
From the Philippines
👍👍👍👍👍👍👍👍👍
Alex Saclao ♥♥♥
My man in the Philippines 🇵🇭 how the heck are you?
Great rod wishng to have one someday God bless.
Thanks for watching. I hope you get one and have many amazing fishing adventures.
Good quality,,master,,,Angler from phillipens
quality makes all the difference
Wow great info boss
You are most kind. Thank you
Wow ..this is a lot of work...!
It is a process, for sure. Really good fishing rods require a bit more work.
Nice video
Rod 👍👍👍👍🎣🐟
Thanks
Wow, cool 👍
great video
Thanks Chalu
this is awsome.
you are awesome
Very good rod
Good Job ...👍👍
🤙🏼
Very cool
Glad you liked it 👍🏼
Awesome 👌
thanks Rion
nice to see , thanks
Roger that
Very very cool🤘
Wish to to have a fishing rod this christmass.. 🙏🙏🙏🙏🙏
Me too. I wish I could fish with you 🌲
Great making rod
Thanks for checking out the video, Zaldo.
Waah...mantap kali joran pancing nya👍👍👍
👍👍👍👍 Thanks for Video!!!
you are welcome
Very nice information sir
Thank you so much
I missed the handle attachment. Awesome video.
Thanks Mike
Nice sir GOD bless.
والله ممتاز جدا وفنان في الاداق
Exllend sir 👍👍👍
Good stuff 👏 👍 💯🤜🤛
Thanks a million ☄🤙🏼
Ini sangat luar biasa..... Saya yakin joran yang Anda buat itu sangat kuat.. Jika melihat proses pembuatannya.... Trimakasih atas informasinya.... Semoga anda sehat selalu....
Sama sama. Terima kasih telah menonton. Saya setuju. Itu selalu menyenangkan untuk melihat bagaimana produk perikanan berkualitas benar-benar diproduksi.
Respect for the rod.
Nice boss good rod
Thanks bud