Hey good one Artie. Carbs are very critical of course. One time, YEARS AGO, I was on a 3 wheeler, goes to show you how long ago it was, I was flying down a small snow mobile trail in summer, when the throttle stuck wide open! Thank god for thumb switches. I thought I was dead. Rolled it back to camp, took it apart, a small piece of sand, literally 1 grain of sand was what almost killed me. Dang. Ok that story was not related to the video lol, just my input on carbs haha 😂
Good day eh!!! Nice job cleaning the crab. With all those tiny ports, you did great to see them all. I hope your eyes are getting better!! Take care!!!
Great video Artie! I always learn a new trick when you break something down. Greatly appreciate your videos and I hope you keep posting more videos. Be safe!!!
Hey Artie I hope your doing well bud nice work getting the carburetor cleaned out. Its amazing how the smallest amount of dirt or grime in the carb can make a machine run bad. Like you mentioned the carb looked clean when you took it off of the power washer but after you went through the carburetor and cleaned it up it made a huge difference like day and night. When you started it I ran smooth and it was putting out some good water pressure another thing you mentioned was the throttle response i agree it had very good throttle response. Great video my friend I will talk to you soon. 👍
Thank you Taylor. It doesn't take much dirt to make a carb not work. I hope all is well with you and I had a good time on the live stream. Good job and Thanks for watching 👍
20:00 the choke rod is hooked up wrong. It goes in from the bottom, not the top. I’ve made that mistake and it makes a difference - the rod binds when working the choke lever when it’s put on upside down vs no drag and smooth action when it’s put on correctly.
![Full Detailed Honda GCV160 GCV190 Carb Clean [4k]](http://i.ytimg.com/vi/XUNlkJFfv_E/mqdefault.jpg)
ruclips.net/video/zdJe-p0NOe0/видео.html
Honda GC160. No start. How to check fuel system
Another machine saved from the landfill! Great job Artie!
Thank you David Curnutt and Thanks for watching 👍
Hey good one Artie. Carbs are very critical of course. One time, YEARS AGO, I was on a 3 wheeler, goes to show you how long ago it was, I was flying down a small snow mobile trail in summer, when the throttle stuck wide open! Thank god for thumb switches. I thought I was dead. Rolled it back to camp, took it apart, a small piece of sand, literally 1 grain of sand was what almost killed me. Dang. Ok that story was not related to the video lol, just my input on carbs haha 😂
It's a good comment. You could of been killed by a grain of sand. Close one. Thanks for watching 👍
This video helped me fix a generator with the same motor. Thank you so much sir!
I'm glad this video helped you. Thanks for watching 👍
Nice job Artie, she's running great now brother. 👍🏼
Thank you John Klem and Thanks for watching 👍
Yes sir, anytime 👍
Happiness is a good running pressure washer great job
Thank you. Chuck B the owner is pleased 👍
Great video. Good job stripping that down and cleaning the carb, it runs great now
Thank you Joseph. I appreciate it and Thanks for watching 👍
Great job Artie! Doesn't seem to take much to clog a carb. Clean and running good now. 👍🎥🇺🇸
Thank you Roger Mcdonald and Thanks for watching 👍
Good day eh!!! Nice job cleaning the crab. With all those tiny ports, you did great to see them all. I hope your eyes are getting better!! Take care!!!
Thank you Grampie they are getting better a little bit at a time. Thanks for your concern and Thanks for watching 👍
Good job on that one artie. You saved the oem carb in it also
Thank you John. We win some and lose some as you know. Thanks for watching my friend!
Great video Artie! I always learn a new trick when you break something down. Greatly appreciate your videos and I hope you keep posting more videos. Be safe!!!
Thank you Brent McMillan. I'm glad you enjoyed the video 👍
Hey Artie I hope your doing well bud nice work getting the carburetor cleaned out. Its amazing how the smallest amount of dirt or grime in the carb can make a machine run bad. Like you mentioned the carb looked clean when you took it off of the power washer but after you went through the carburetor and cleaned it up it made a huge difference like day and night. When you started it I ran smooth and it was putting out some good water pressure another thing you mentioned was the throttle response i agree it had very good throttle response. Great video my friend I will talk to you soon. 👍
Thank you Taylor. It doesn't take much dirt to make a carb not work. I hope all is well with you and I had a good time on the live stream. Good job and Thanks for watching 👍
Great results Arty,,, we were all willing that WD40 straw into that hole with you 🤣🤣👍🏻
Lol Steve. Thank you and Thanks for watching 👍
Wow that runs nice I'd say its a win Artie 👍
Thank you Bill Clement. Thanks for watching 👍
Hey hey Artie, great job
Thank you Rusty and Thanks for watching brother!
20:00 the choke rod is hooked up wrong. It goes in from the bottom, not the top. I’ve made that mistake and it makes a difference - the rod binds when working the choke lever when it’s put on upside down vs no drag and smooth action when it’s put on correctly.
Good eye. Your right. I have since corrected it. Thanks for watching 👍
Nice job! Runs well
Thank you DK 👍
GREAT JOB!
Thank you and Thanks for watching my friend 👍
Thank you! Was helpful.
You are welcome and thanks for watching 👍
good vid thanks lee
Thank you Lee 👍
Well done works great 👍
Thank you Henry 👍
Great video well done 👍
Thank you my friend 👍
Very interesting,
Thank you Sir and Thanks for watching 👍
Dear friend show how to assembly de cilinder
Hey, I must do something wrong. When I put it back together, I can not move the choke in & out & I can not start the engine. Help???
The choke lever maybe upsidedown. I've done it before. Good luck and Thanks for watching 👍
Is this the same as the GCV?
I think so. Thanks for watching 👍
Whereiddound