Best solution! 100% Gauranteed!!! If the paper is laying bent over, the registration will read a distortion, so you need to lift the paper so that the registration can read the square box accurately. Try it, thank me later.
I've seen tons of "fixes" for things like this. They all take too much time. My solution has been working for years. Take a clearish piece of tape and put it over the registration marks. I say "clearish" because the tape that works for me isn't crystal clear. It's has a white color to it. What it does, is mute the shine and lets the black marks to show through. I use this method on metallic and paper that is too glossy. Some tape I have used doesn't work ( I don't know why) but I found a brand on Amazon that works every time. It must be the perfect opaqueness and thickness. I can send a link to the tape if you like.
I just got my Cameo 3 for Christmas and I was super excited!! I’m ready to pull my hair out!! I’ve learned a lot of little things but can not for the life of me get the registration marks to read! I’ve designed a iron on transfer and I’ve tried sending to a million times and I don’t know what I’m doing wrong! I’ve spent hours on the chat with Silhouette America helping me and still have gotten nowhere . My husband even went and bought me a brand new laptop to use with my Cameo that he got me. I’m so lost!!!!
Oh my word!! You just saved my life! Thank you so much. I needed to print and cut on clear plastic but didn't know how the machine was going to see the registration marks. White sticker paper!! Brilliant! Thank you, thank you!
Thanks. An easier fix is to place the sticker sheet about a half an inch further down on the cutting mat. Then the Cameo finds the registration marks where it expects them to be. Worked for me!
I bought the silhouette business program and while trying to figure things out. I happened to change a setting I tried everything and could not print registration failure. I figured it out. Go into Page setup. Size change setting to current printer this fixed my issues.
what would you suggest for pixscan mat going out the back of cameo 3 when reading registration marks? I have calibrated and followed 29 different RUclips trouble shooting video's?
Thank you, but still did not solve solution. Downloaded the Jingles all the Way and since then it has messed up my portrait. Left a white background I can not get rid of and now my cutter say registration marks can not read. Help!
Thank you so much!!! You are always so helpful & knowledgeable!!! I have not even thought of making foil stickers until now!! You also explained why I may get some registration errors in general - thank you!!! Keep the videos coming, I wish your whole blog was on RUclips!! If not for you, my silhouette would have gone out the window a long time ago :) I tend to turn to my cricut a lot...
I have done the manual adjustment for the registration marks and it has worked before . . . Until today. I am doing a print and cut and cut two other sheets (different colors) and then when I went to the third one - wouldn’t cut. Any suggestions would be appreciated.
can i get help. i want to print on a printable vinyl. we only have a large format printer. how do you print with registration marks from sil to my large format printer.
Hi Melissa, I seem to have a problem when cutting cut files. One side cuts thinner than the other, to me its as if the the thickness is wrong but like i say in different parts of the cut file. Do you have a video for this
Mine keeps reading “ registration failed” and it spits sticker paper back out. I’m wondering if I should return it because these seems crazy to have to go through so much and can’t get the product to do what I bought it for. I printed to sticker paper, white, and stickers don’t look to be in the threshold so why won’t it cut?
I can afford the removable sticker paper, but the silver or gold sticker paper is really expensive . Did you get a good deal somehow during black friday or something? Love your informative videos and tutorials, am learning so much from them .! Thank you!
Hi i have a shadow in my registration mark whem i send it to cut. Can this be the reason why it's no reading and when it does cuts where it's not supposed to. Thank you
Please help very often I print and cut . the machine reads the registration , but the cut is inaccurate sometimes way off on my design sometimes wasting 3 sheets before I can get. A good one. Thanks
I have a silhouette portrait machine but I would like to know what is the best sticker paper to buy I like it glossy but not so glossy what do you recommend it
A Fields go to online labels! They seem to be the best and they have a bit that has all cutting setting for machines for the different types of paper xx
Turn off the registration marks. There are a couple of decent videos that show you how. It was the only thing that kept me from tossing the machine in the trash.
I still can't get mine to read the marks. I've tried on reg printer paper, cardstock, and printable vinyl sticker paper. All give me the registration failed message. Any other tips I can try?
Hi @carlottawinters6124, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
Question. Using the Cameo 3. Using regular vinyl with the registration mark set to off it cuts, When the registration marks are turned on the machine docent cut but says job done, and the studio sows the cutting in progress bar moving. So, why does it cut with the registration mark is set to no. Thanks
Darling i absolutely love u for this now i totally bypass the entire printing process & instead of only cutting on letter size paper i can now cut 12 x 12 & use all my paper
please help me i am trying to calibrate my new cameo 3 with a pixscan mat and i have tried everything to calibrate but it just doesn't want to work and suggestions?
My portrait 4 isn’t cutting with the registration marks on and I used clear sticker paper. It printed on my Epson with the registration marks showing but for some reason it won’t cut on the cutting machine 😢
It could be any number of things like the registration marks are not printing in the right area b/c the paper isn't gripped by the printer due to being glossy. It could be glare from an overhead light.
Have you found a resolution to this problem? I have been trying to use my PixScan mat for the last couple of days but NOTHING I have tried after Googling my butt off has helped. My Cameo 3 will NOT register the PixScan mat no matter what I do. This is very frustrating.
Can I use extra paper to print the registration marks on and then the actual print that I want(on a4) in the middle. So I fill 12x12 with dummy paper for registration marksand sticker paper a4 in the middle. Have anyone done this? The cut keeps missing :(
Hey there, it is hard to troubleshoot here. Please feel free to drop us an email with details of what is happening: www.silhouetteschoolblog.com/p/blog-page_9.html Or! If you'd like extra help - like in-depth video tutorials or 1:1 help via email or chat for your projects - please consider joining Silhouette U (www.silhouetteu.com) where we offer a 7 day free trial!
Hey there! Check out this step by step first print and cut to see if it helps! www.silhouetteschoolblog.com/2022/01/how-to-print-and-cut-with-silhouette.html
Hey there! Not sure what’s happening so it’s tricky to help. We do have a troubleshooting blog post about registration marks here: www.silhouetteschoolblog.com/2019/12/silhouette-cameo-print-and-cut.html
Best solution! 100% Gauranteed!!! If the paper is laying bent over, the registration will read a distortion, so you need to lift the paper so that the registration can read the square box accurately. Try it, thank me later.
I've seen tons of "fixes" for things like this. They all take too much time. My solution has been working for years. Take a clearish piece of tape and put it over the registration marks. I say "clearish" because the tape that works for me isn't crystal clear. It's has a white color to it. What it does, is mute the shine and lets the black marks to show through. I use this method on metallic and paper that is too glossy. Some tape I have used doesn't work ( I don't know why) but I found a brand on Amazon that works every time. It must be the perfect opaqueness and thickness. I can send a link to the tape if you like.
I just got my Cameo 3 for Christmas and I was super excited!! I’m ready to pull my hair out!! I’ve learned a lot of little things but can not for the life of me get the registration marks to read! I’ve designed a iron on transfer and I’ve tried sending to a million times and I don’t know what I’m doing wrong! I’ve spent hours on the chat with Silhouette America helping me and still have gotten nowhere . My husband even went and bought me a brand new laptop to use with my Cameo that he got me. I’m so lost!!!!
Oh my word!! You just saved my life! Thank you so much. I needed to print and cut on clear plastic but didn't know how the machine was going to see the registration marks. White sticker paper!! Brilliant! Thank you, thank you!
Thanks. An easier fix is to place the sticker sheet about a half an inch further down on the cutting mat. Then the Cameo finds the registration marks where it expects them to be. Worked for me!
Depends on your lighting too.
I bought the silhouette business program and while trying to figure things out. I happened to change a setting I tried everything and could not print registration failure. I figured it out. Go into Page setup. Size change setting to current printer this fixed my issues.
You can put some of the not clear scotch tape over the registration marks and it won't shine back. Works for me.
what would you suggest for pixscan mat going out the back of cameo 3 when reading registration marks? I have calibrated and followed 29 different RUclips trouble shooting video's?
I would try to update the firmware and the software. That was a bug in an older version of the software so updating should help.
what else can be used instead of the removeable sticky paper? can regular paper be put at the top
Thank you, but still did not solve solution. Downloaded the Jingles all the Way and since then it has messed up my portrait.
Left a white background I can not get rid of and now my cutter say registration marks can not read. Help!
Thank you so much!!! You are always so helpful & knowledgeable!!! I have not even thought of making foil stickers until now!! You also explained why I may get some registration errors in general - thank you!!! Keep the videos coming, I wish your whole blog was on RUclips!! If not for you, my silhouette would have gone out the window a long time ago :) I tend to turn to my cricut a lot...
THANK YOU! I wish I had found this earlier! I really appreciate all that you do for us SC users :)
Do you know if you can print color inks on it? Do the colors show up?
I have done the manual adjustment for the registration marks and it has worked before . . . Until today. I am doing a print and cut and cut two other sheets (different colors) and then when I went to the third one - wouldn’t cut. Any suggestions would be appreciated.
Thank you ! Had the problem using very glossy photo paper. Now it works and cuts correctly with the removable sticker paper.
can i get help. i want to print on a printable vinyl. we only have a large format printer. how do you print with registration marks from sil to my large format printer.
Thank you for this vid. I was pulling my hair out trying to get it to work!
Hi Melissa, I seem to have a problem when cutting cut files. One side cuts thinner than the other, to me its as if the the thickness is wrong but like i say in different parts of the cut file. Do you have a video for this
Mine keeps reading “ registration failed” and it spits sticker paper back out. I’m wondering if I should return it because these seems crazy to have to go through so much and can’t get the product to do what I bought it for. I printed to sticker paper, white, and stickers don’t look to be in the threshold so why won’t it cut?
Hey there! I would check your lighting. This video also helps with troubleshooting Print and Cut: ruclips.net/video/6rkONiJhmts/видео.html
I can afford the removable sticker paper, but the silver or gold sticker paper is really expensive . Did you get a good deal somehow during black friday or something? Love your informative videos and tutorials, am learning so much from them .!
Thank you!
Hi i have a shadow in my registration mark whem i send it to cut. Can this be the reason why it's no reading and when it does cuts where it's not supposed to. Thank you
Please help very often I print and cut . the machine reads the registration , but the cut is inaccurate sometimes way off on my design sometimes wasting 3 sheets before I can get. A good one. Thanks
I have a silhouette portrait machine but I would like to know what is the best sticker paper to buy I like it glossy but not so glossy what do you recommend it
A Fields go to online labels! They seem to be the best and they have a bit that has all cutting setting for machines for the different types of paper xx
what if you want to cut no not print? I can't find a tutorial on that
Turn off the registration marks. There are a couple of decent videos that show you how. It was the only thing that kept me from tossing the machine in the trash.
I still can't get mine to read the marks. I've tried on reg printer paper, cardstock, and printable vinyl sticker paper. All give me the registration failed message. Any other tips I can try?
Hi @carlottawinters6124, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
Question. Using the Cameo 3. Using regular vinyl with the registration mark set to off it cuts, When the registration marks are turned on the machine docent cut but says job done, and the studio sows the cutting in progress bar moving. So, why does it cut with the registration mark is set to no.
Thanks
same here... any solutions?
My regiatration marks do not fully print on my printing...what do i do...just bottom left has one line instead of two
Genius Idea! Going to try on transparency sheets.
you are a LIFESAVER
Can I do a 3 or more color heat transfer cut without the registration marks
Darling i absolutely love u for this now i totally bypass the entire printing process & instead of only cutting on letter size paper i can now cut 12 x 12 & use all my paper
Thanks so much…. This totally saved me
Love Silhouette school!
Thanks for the help but my sticker paper is now stuck to my vinyl :/
please help me i am trying to calibrate my new cameo 3 with a pixscan mat and i have tried everything to calibrate but it just doesn't want to work and suggestions?
plz, update on this video but with glossy paper, thanx!!!
When you say "printer" do you mean just a regular printer, or are you printing on the paper with the Silhouette?
A regular home printer - like an inkjet
My portrait 4 isn’t cutting with the registration marks on and I used clear sticker paper. It printed on my Epson with the registration marks showing but for some reason it won’t cut on the cutting machine 😢
It could be any number of things like the registration marks are not printing in the right area b/c the paper isn't gripped by the printer due to being glossy. It could be glare from an overhead light.
this video saved my life, an a lot of material. thank youuuu
My problem is that the registration sensor cant read the PixScan mat :(
Have you found a resolution to this problem? I have been trying to use my PixScan mat for the last couple of days but NOTHING I have tried after Googling my butt off has helped. My Cameo 3 will NOT register the PixScan mat no matter what I do. This is very frustrating.
same my portrait 1 will not register the portrait pixscan mat. Just ridiculous
Can I use extra paper to print the registration marks on and then the actual print that I want(on a4) in the middle. So I fill 12x12 with dummy paper for registration marksand sticker paper a4 in the middle. Have anyone done this? The cut keeps missing :(
Hey buy more because our product doesn't work correctly
I’m using the matte white sticker paper not shiny
Also check out this video! ruclips.net/video/6rkONiJhmts/видео.html
Is this possible for the Cricut as well?
Kayla Rieves Try it out, make a video. If it works, you can share your results with the world, and maybe make some money from your video!
what if the image is even after i trace on the printer. ???
I was cutting sticker paper a few days ago, everything was fine but now its not cutting straight
Hey there, it is hard to troubleshoot here. Please feel free to drop us an email with details of what is happening: www.silhouetteschoolblog.com/p/blog-page_9.html
Or! If you'd like extra help - like in-depth video tutorials or 1:1 help via email or chat for your projects - please consider joining Silhouette U (www.silhouetteu.com) where we offer a 7 day free trial!
@@SilhouetteSchool hey thanks for answering. I will send an email❤️
I cutting card stock. I've never had this issue until lately. I did the update and it still won't work. I am getting sick of this 🥺
Hey there! Are you printing on the card stock or just cutting?
@@SilhouetteSchool I printed on card stock and need to cut.
I can't even do any print and cut. Not even white paper.
OMG 🤯🤯🤯 Thanks!!!
thank you so much
this is awesome!!!
I need help connecting my cameo 3 bluetooth to my Mac.
Get you self PC
masking tape works
Great tip =)!
omgosh.... Thank You so..... Much!! : )
registration marks was WORKING BEFORE now it's not. wtf happened lol this is so annoying
That doesn’t work 😅
Hey there, check out this video instead if you're still having issues with print and cut: ruclips.net/video/6rkONiJhmts/видео.html
Totally lost. 🤦🏻♀️
Hey there! Check out this step by step first print and cut to see if it helps! www.silhouetteschoolblog.com/2022/01/how-to-print-and-cut-with-silhouette.html
🤬 omg help me
Hey there! Not sure what’s happening so it’s tricky to help. We do have a troubleshooting blog post about registration marks here: www.silhouetteschoolblog.com/2019/12/silhouette-cameo-print-and-cut.html
@@SilhouetteSchool Thank you, lol I was in my feelings😆.