all this time. My cameo used to work perfectly at the beginning, now I can't get auto-registration to work. however, the manual method and the KEY point made to put the head over the mark and NOT the optical eye worked perfectly. It's still a pain that they can't get it to work with auto, however i have some hair left over from the frurstration! thank you!!
Your welcome. Make sure the drawer at the top is pushed all the way back as to not block the light, that can cause it to not recognize and also if it's too dark on the room. I have also found that if your ink is not black on the registration mark it fails and that usually happens with sublimation inks because the black prints more like a dark brown. Thanks for watching
I had the issue of my brand new cameo 4 not reading the registration marks and I was ready to send it back. But I’d seen quite a few saying to raise the mat above level. So I tried it and it works ever time like this now.
Thank you so much for this helpful tutorial! You explained it so well and better than others. I wasn't lining it up to blade 1 and was lining it with the square! thanks! :)
THANK YOU!!! I been playing with this silhouette for so long and never knew this. As soon as i tried moving the blade over it, it cut! Now I can get my sticker done !!
Wow just want to say thank you, I'm trying to make sublimation stickers and had trouble with auto registration tried manual didn't know blade had to be on square thank you
I've been cutting for almost a year and never been able to manual register! Any guess why? I've been align the optical eye!!!!!!!!!!!!!! I think you just saved me tons of sanity and money! Thanks
Just bought this because it's almost impossible to get a good print and cut from a Cricut, and now i'm running into THIS issue on my first print and cut on the Cameo..
Oh my Gosh!! Thank you! Thank you! Thank you! I've watched a dozen videos at least and noone says how to do this. This is great and I know will fix the issue. I am new and just learning but I am so thankful for this video!! Thank you!!
Thank you so much for your video you explained it excellent. I could not figure out what the issue was with the sublimation ink and registration issue once i watched i was able to complete project. Your the best. Thanks
Thank you for this video!! I was so excited when it read my registration marks!! I was thinking, I FINALLY GOT IT!! But no😔 my cut was way off!! I followed your calibration video and it did that already. Do you have any tips with how to get perfect cuts? TIA
Iv got a silhouette portrait and I’m doing all this and it’s still not registering the marks :( waste of money for me having this machine cos it’s actually driving me daft
Hi, i was having this issue, tried the manual way as you showed it and it worked for one cut, but now I'm trying to do more and cant get it to pick up and I have no clue what I'm doing wrong? Any help?
I genuinely think my machine is broken. I have followed all of the videos step by step and no matter how I do it it will not register. I am so frustrated.
Thank you, sometimes I get so discouraged making these videos, not knowing if I am wasting me time. It really makes me smile when I get feedback like this ☺
thank you for this video, can you also please share the link where you did the calibration on your cameo 4 plus? I do also have a couple of questions 1. what printer did you use to print the design on for the test cut on this video? 2. is there a specific setting needed to be adjusted on the printer properties to make sure that the registration marks have equal amount of margins (the top and bottom, left and right) on the three registration marks? 3. What firmware version of your cameo 4 plus and software version of your silhouette studio? Thank you so much for all of your video uploads!
Hello, All of your questions regarding calibration will be answered in my next upload. I use 3 different printers in my shop and those are in the video I posted 2 weeks ago
At first it appeared like the manual calibration succeeded but then it didn't start cutting :( Edit: I actually read one of your replies to some other people's comments and it turns out, my room wasn't properly lit. You are awesome, thank you!
You may need to watch the video again because I show you were to put the optical eye. You can also tune into my weekly lives when I am at the computer and I will be happy to demo it
@@veronicacruz4340 If blade 1 is perfectly over the square it should register. If it's not registering make sure that your ink is dry on the paper. Use matte presentation of using sub ink and not plain paper. Thicken up your registration marks under the registration tab so they are scannable. Lastly make sure the paper is straight. I prefer using the mat to register. If all of this fails call the company
THANKS ALOT!!!!! i couldn't find the issue with my cutter until I saw your video 😭😭🧡🧡🧡🧡🧡🧡 YOU SAVED ME GOD BLESS YOU!!!!
all this time. My cameo used to work perfectly at the beginning, now I can't get auto-registration to work. however, the manual method and the KEY point made to put the head over the mark and NOT the optical eye worked perfectly. It's still a pain that they can't get it to work with auto, however i have some hair left over from the frurstration! thank you!!
Your welcome. Make sure the drawer at the top is pushed all the way back as to not block the light, that can cause it to not recognize and also if it's too dark on the room. I have also found that if your ink is not black on the registration mark it fails and that usually happens with sublimation inks because the black prints more like a dark brown. Thanks for watching
Thaaaaaaank you!!!! Learned how to manual register because of you! Mine failed and the manual worked.
Alright now!!! You got this
I was literally about to abandon the sticker sheet I was working on and found your video. Thank you so much! The tutorial solved my problem!!
I had the issue of my brand new cameo 4 not reading the registration marks and I was ready to send it back. But I’d seen quite a few saying to raise the mat above level. So I tried it and it works ever time like this now.
Hi I am not sure what you mean by raise the mat above level? Buy I do know it only registers with the mat
Thank You! I’ve looked at so many videos you just saved my life
Thanks for watching
Thank you so much for this helpful tutorial! You explained it so well and better than others. I wasn't lining it up to blade 1 and was lining it with the square! thanks! :)
Your welcome and thanks for watching!
Thank you for sharing this!! This helped my Cameo 5 to register the registration marks.. Blessings to you ❤
THANK YOU!!! I been playing with this silhouette for so long and never knew this. As soon as i tried moving the blade over it, it cut! Now I can get my sticker done !!
Yes that is what Iove to hear. It would not cut for me yesterday and I finally I realized I had it on auto ..I was like not me. 😂
You're a life saver!!! I almost gave up. Thank you!
🙌🏼🙌🏼🙌🏼🙌🏼 this literally saved me from frustration
Wow just want to say thank you, I'm trying to make sublimation stickers and had trouble with auto registration tried manual didn't know blade had to be on square thank you
Was having so much issues. But this method works. Bless you 😊
Glad it helped you!
I've been cutting for almost a year and never been able to manual register! Any guess why? I've been align the optical eye!!!!!!!!!!!!!! I think you just saved me tons of sanity and money! Thanks
Just bought this because it's almost impossible to get a good print and cut from a Cricut, and now i'm running into THIS issue on my first print and cut on the Cameo..
What's the issue your having ? Registration off?
Thank you so much! No was using sublimation ink and worked perfectly
Oh my Gosh!! Thank you! Thank you! Thank you! I've watched a dozen videos at least and noone says how to do this. This is great and I know will fix the issue. I am new and just learning but I am so thankful for this video!! Thank you!!
Really appreciate you taking the time to show this. Great video. God bless.
thank u my sister because i almost gave up on print and cut work but i will definitely tried this
Thank you so much for your video you explained it excellent. I could not figure out what the issue was with the sublimation ink and registration issue once i watched i was able to complete project. Your the best. Thanks
Awesome that's what I like to hear!
Thank you thank you! I followed your steps and it worked!!! You just got yourself another subsciber!!
Did the trick, good stuff :D!
Thank you. This got mine working
Glad it helped
Awesome tutorial! Worked like a charm!!
Wow you were right. Finally somebody gave me an answer !!!
Wow! Thanks on clarifying about the sensor location. First time Anyone has clarified that.
Worked great thanks 🎉
hey thank you so much i kept putting the optical eye over the registration mark have a happy thanks giving day take care
Yes me too. Not sure why the makers do not explain this. Hopefully that will solve your issue
Thanks for this, I am new to cameo and need to learn how to work it
7:24 pm Thank you so much ❤😊
Did you just print that paper? How do I get the paper I’m so confused
Still don’t work
I did all that and it still doesn't work. Do you have another idea what I could try?
Thank you for this video!! I was so excited when it read my registration marks!! I was thinking, I FINALLY GOT IT!! But no😔 my cut was way off!! I followed your calibration video and it did that already. Do you have any tips with how to get perfect cuts? TIA
You may need to do your calibration again. Watch my video on perfect cuts
Worked perfectly!!! Thank you! Thank you!!
How were you able to print out registration marks?
How did you get the registrations mark so dark?
i love you so much for this tutorial
Oh boy thank you!!! Best video on this 👏
Iv got a silhouette portrait and I’m doing all this and it’s still not registering the marks :( waste of money for me having this machine cos it’s actually driving me daft
Ummm your probably not doing the manual registration as I have shown in the video correctly. I show you where to move the blade too
Bang cameo 4 saya pas mau cutting tulisan redy nya gak ada ya
thank you so much your video help me a lot God bless you
Thanks for supporting! I hope you like the video
Thank You so much for your tutorial... It's really work... Appreciate it... You have solve my problem...
Thanks much for this.
mine is still failing! Help please!
I am sorry to hear that. Try to do it manually by lining it up in the video as I did. I hope that helps.
YOU ARE A GODSEND THANK YOU SO SO SOOO MUCH!!!!!
Hi, i was having this issue, tried the manual way as you showed it and it worked for one cut, but now I'm trying to do more and cant get it to pick up and I have no clue what I'm doing wrong? Any help?
Move the #1blade directly over the square select manual under registration and it will work
@@ladyprintboss I did! I don't know what Im doing. But I know it works cause it did it once... but now maybe theres another issue. Thank you!
@@kingdomkustomapparel4883 if you need to jump on a call just reach out
Thank you! I was getting frustrated but your tip about lining up the 1 blade slot with the square saved me.
I genuinely think my machine is broken. I have followed all of the videos step by step and no matter how I do it it will not register. I am so frustrated.
ONLY VIDEO THAT GOT MY CAMEO REGISTERING A BIT BUT FAILS IN THE END BUT AM ABOUT TO TRY AGAIN THANKS
If it's off register in the end figure. Where is it off and bottom left, right etc? That's where you need to adjust
It didn't work for me. I got it in December, I think I'm going to send this machine back.
Only video that i could find that works thank you so much
Thank you, sometimes I get so discouraged making these videos, not knowing if I am wasting me time. It really makes me smile when I get feedback like this ☺
THANK YOU!!!!! ❤
Hello Mrs. Latonya, is there anyway to move the registration marks out more so I can use more of the 8.5 x 11 HTP??
ruclips.net/video/-sGVVw5HTJE/видео.html
yes under registraion setting watch video @9:24
Bruhhh thank you so much ♥️
Not a Bruhhh, a Sista. LOL and you are welcome. Thanks for checking out the vid.
You’re a life saver thank you!!!
Thanks hope you subscribed!
thank you so much for this tutorial
THANK YOU! THIS VIDEO SAVED ME!
Omgsh thank you thank you 🙏🏽 thank you 🙏🏽
Thank you so much
Thaaaank you so much ! Yess it worked 😀
Thank you!!!♥♥♥
what if im using a scrap of vynil on the cutting mat? or a vynil roll?
you need to use your cutting mat any time you use the machine to do a print and cut
My problem is solved. Thank you!
Omg!!
Thank you so much, I definitely needed this input. I appreciate you♥️
Thank you so much! This helped me a lot! 🥺💖
thank you for this video, can you also please share the link where you did the calibration on your cameo 4 plus? I do also have a couple of questions
1. what printer did you use to print the design on for the test cut on this video?
2. is there a specific setting needed to be adjusted on the printer properties to make sure that the registration marks have equal amount of margins (the top and bottom, left and right) on the three registration marks?
3. What firmware version of your cameo 4 plus and software version of your silhouette studio?
Thank you so much for all of your video uploads!
Hello, All of your questions regarding calibration will be answered in my next upload. I use 3 different printers in my shop and those are in the video I posted 2 weeks ago
here you go - ruclips.net/video/lhPnHAVcLSI/видео.html
I don’t see the square on mine... man I’m struggling
nah, didn't work, its getting the top square, the right registration but its skipping over the bottom left completely
thank you! worked great!
Thank you, but it still won't register.
Thank you!!!
At first it appeared like the manual calibration succeeded but then it didn't start cutting :( Edit: I actually read one of your replies to some other people's comments and it turns out, my room wasn't properly lit. You are awesome, thank you!
Glad I could help!
It didn’t work for me I’m almost feeling like I have a defective machine
give it another please dont give up
I did it manual registration and it still didn't work
You may need to watch the video again because I show you were to put the optical eye. You can also tune into my weekly lives when I am at the computer and I will be happy to demo it
@@ladyprintboss I watched the video more than one time and I put the blade on the black box and it still didn't work
@@veronicacruz4340 If blade 1 is perfectly over the square it should register. If it's not registering make sure that your ink is dry on the paper. Use matte presentation of using sub ink and not plain paper. Thicken up your registration marks under the registration tab so they are scannable. Lastly make sure the paper is straight. I prefer using the mat to register.
If all of this fails call the company
whhaaa thee f*******ck hoowww did it work for me thank you so much
Mines didn’t work I don’t even know what you did
I am sorry to here that, maybe try watchin it again because the trick works great
we have to use paper i don't have printer to print out something like that
@@ladyprintboss
very low audio hard to hear.
Thanks for letting me know. I will make sure I move the mic closer to me.
but I still found it useful and informative ... thank you for sharing.
I can hardly you!
Sorry I did not have a good mic at that time. Most of my videos are just on the fly. Not perfect , I just try to help out when I can. Good luck
🫡
SPEAK UP!!!!
TURN YOUR VOLUME UP!!!!!!
THANK YOU!!!!!! ❤❤❤❤❤❤❤
THANK YOU!!!!!