Your Danish Oil Questions, Answered - Notes from a Cabinet Maker.
HTML-код
- Опубликовано: 23 июл 2024
- Your Danish Oil Questions, Answered - Notes from a Cabinet Maker.
In this video I answer your questions about apply Danish Oil finish. I am applying this to my Kitchen cabinets and I will share with you what information I have on Danish Oil. This is one of the easiest and durable finishes that you can apply. Enjoy!
Find me on
Facebook at: / madnerdworkshop
Instagram at: / madnerdworkshop
#Danish Oil #Finishing #Woodworking
Items in this video
Watco Danish Oil Wood Finish, Natural: amzn.to/3tsEXcu
Watco Danish Oil Wood Finish, Medium Walnut: amzn.to/3ctnhaB
Watco Danish Oil Wood Finish, Black Walnut: amzn.to/2MtLXVD
Watco Danish Oil Wood Finish, Pint, Cherry: amzn.to/3rd0OT5
S&F STEAD & FAST Painters Tack Cloth Woodworking, Tack Cloth for Sticky Tack Rags: amzn.to/2MnJJqM
Another great finish (there is a video on this one to)
Wipe-On Poly Finish Clear, pint, Satin: amzn.to/3mvPWxW
Bench Cookie Plus Work Grippers with Bench Cookie Risers: amzn.to/3vUd5xF
Rockler Bench Cookie Plus Work Gripper (Single): amzn.to/3jf6Pya
Bench Cookie Cones: amzn.to/3qv95mf
Some of my favorite tools I use all the time.
Ridgid R86044B 18-Volt Brushless Compact Router: amzn.to/2T7rw35
Rockler XL Router Table Box Joint Jig: amzn.to/36CHjue
1/2" Box Joint Cauls, 4-pack: amzn.to/2NxN3Nb
CMT 801.128.11B Dado Clean out Bit: amzn.to/2LV3LHt
Bessey LHS-10 10-Inch Wood Handscrew Clamp: amzn.to/2Oyp2ZG
Freud 9/16" Depth Slotting Cutter Set with 1/2" Shank (63-162): amzn.to/2XXSHvV
Incra LS25SYS 25" Range Positioner with Pro-II Joinery Fence System: amzn.to/3ckhrFA
Incra WONDERFENCE37 Wonder Fence Router Table Fence: amzn.to/2WGy1IX
Rockler XL Router Table Box Joint Jig: amzn.to/36CHjue
INCRA I-BOX Jig for Box Joints: amzn.to/36yrR2i
Rockler Router Table Box Joint Jig: amzn.to/3cbV1Fs
CMT Solid Carbide Downcut Spiral Bit, 1/2-Inch Diameter: amzn.to/3c60xJL
Freud 1/2" (Dia.) Double Flute Straight Bit with 1/2" Shank: amzn.to/37hWaL3
Titebond II Extend, Pint: amzn.to/3jVh9Ih
Titebond II Extend, Gallon: amzn.to/3k2lNnE
Titebond II Premium Wood Glue, 1 Gal: amzn.to/2JsJAR5
Titebond II Premium Wood Glue, 1 16 oz.: amzn.to/2GydXEO
PORTER-CABLE 892 2-1/4-Horsepower Router: amzn.to/2SjOtMV
Incra LS25SYS 25" Range Positioner with Pro-II Joinery Fence System: amzn.to/3ckhrFA
Incra WONDERFENCE37 Wonder Fence Router Table Fence: amzn.to/2WGy1IX
Stanley Tools 25-Feet FatMax Tape Measure: amzn.to/2BFKjuL
Powermatic 54A Deluxe 6-Inch Jointer: amzn.to/2XrVDDD
RIDGID R4512 10 in. 13-Amp Cast IronTable Saw: amzn.to/2EGfrJf
GRR-RIPPER 3D Pushblock : amzn.to/2EpRpkC
Camera equipment used in this video
PANASONIC LUMIX GH5 4K Digital Camera: amzn.to/2SFKgTN
PANASONIC LUMIX G VARIO LENS, 14-140MM, F3.5-5.6 ASPH: amzn.to/2K1dFnC
Panasonic Lumix G Vario 14-42mm f/3.5-5.6 II ASPH OIS Lens: amzn.to/2LEbZDw
SmallRig GH5/GH5S Cage for Panasonic Lumix Camera: amzn.to/2YeMwTl
RigLand DSLR Wooden Handle Grip (Right Side): amzn.to/2LEhrGx
NICEYRIG Rosette Wooden Handle Grip (Left Side): amzn.to/32Pvu1m
E-Image EG03A2 2 Stage Aluminum Tripod (Black): amzn.to/2Yff0w5
Canon EOS 7D Mark II Digital SLR Camera (Body Only): amzn.to/2LDo0td
Canon EF 24-70mm f/2.8L II USM Standard Zoom Lens: amzn.to/2SBsReO
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, we will receive a small commission at no charge to you. This helps support the channel and allows us to continue to make videos like this. Thank you for your support! 
Хобби
Take a screwdriver and pop the white plastic part off of the cap. There is always a regular metal cap hidden underneath.
That is exactly what I do too.
bruuuhhhhhhhhh why do they make it hard to open when it says twist to open
I agree with you regarding danish oil on furniture it can be infinitely refinished!
That is the beauty of it. Thanks for watching.
Great video, loved your tips to do it in the morning and check on it throughout the day for seepage at night. ASMR voice too!
Thank you, and thanks for watching.
Thank you, sir. Very clear instructions
Thanks for making this video. Helpful.
Thank you for watching.
Thanks for sharing!
Thanks for watching!
Thanks for the video, I like your demeanor. I'll probably pick up some natural Danish oil and then try mixing in my own stains/dyes if I feel like it. It's annoying wiping any solvent based finish over a stain since the solvents pull up the stain. Having it mixed into the finish will lock it in as each coat cures.
It does make it a liltle easier for sure.
For me Danish oil is on of the best finishing products and I use it very often.
I agree Mindspectrum, I apply it all the time to many of my pieces.
Thanks for your video! You taught me a lot ! And I am half Danish !😊
That's great Mary Ann Brown. Thank you for watching.
🤣
Thanks for showing us your struggles removing the cap. Yesterday, after much fiddling I gave up & just used a can opener. 😂
Channel locks are my friend with these caps :). Thanks for Watching.
I realized I could just press my palm down onto the top of the cap, like really putting my weight on it, and then use the friction between my palm and the cap to twist it off. Took a few good turns, but I got it! 😀
I had a project made out of walnut that I tried finishing with watco danish oil and it ended up being sticky could not figure out why? I followed the cans directions, I ended up wiping the " uncured danish oil" off with mineral spirits after like a week of of drying time. I thought it was expired or no good for whatever reason. so after watching you video I did no realize you had to continually wipe the wood that many and length of times to get a proper finish. Your the first person to explain the proper way to apply this stuff. Great job
Thanks, this is the way I have always done it. It has alway worked well for me. Thanks for watching.
Hi Josh, can I ask what sand paper grit you used before applying the Danish Oil? Thanks.
@@marcfoss7687 320
thank you
Thank you for watching.
😂Exactly how I opened the can last night . . . .🙄 Thanks for your very informative videos!
Thanks for watching Mary Miedema.
Very informative. Thanks for posting this. I’m a novice wannabe. I love the look of unfinished poplar from my local big box stores. I’ve made a couple pf table tops that I need to finish and was thinking either danish oil or toug oil. Can you share some thoughts please?
I only used toug oil twice a long time ago. From what I remember I liked the Danish Oil better, I felt that it gave me a nicer look and seems easier to apply. But I am not sure if one is really better than the other.
You can also take the metal cap out of the plastic safety cap (if you don't have anyone in your house this could be a hazard to). This leaves the old fashion metal looking cap that screws & unscrews regularly w/o the safety feature.
It almost always works out that way for me. Thanks for watching Squigglyline.
Using this oil on a Grandfather clock I have built. Red Oak…..I can’t believe how much seepage there is. It madding, ever two to three hours wiping it down, two days into it….WILL IT EVER STOP! I may start drilling and sell oil stock. 😜
Oak is the worst one for seepage, usually about a week to a week and a half. But the look of the finish will make it worth it, as least for me it did.
Great couple of videos on applying danish oil, thank you! All I've done with the stuff so far is test it on some scrap pieces of my project, but I can tell that it's what I want to use. I have a question though.
Any advice on the ideal grit to sand down to before applying it? I'm making a semi-ornamental box out of brazillian cherry to store my sharpening stones. Since I'm going for a bit of a fancy look, I want it to be fairly smooth, like 400-600 grit, but I'm concerned that the smoother surface will inhibit the oil soaking in. Also curious if it would work if I decided to go nuts and give it a hand plane finish.
Thanks 🙂
I would think 400 would be just fine for what you want to do.
Thanks for the video! I have some reclaimed line that I made a picture frame out of. I’d like to keep the wood tone very close to the natural color. Would you recommend the danish oil for that or something different?
The danish oil Natural will give is a golden color. If you are looking to keep it the same color with some protection try water based poly.
One approach for the cap is to wipe clean the threaded neck of the container and the inside of the cap so that no Watco will dry at these points of contact. Question: Have you ever laid down a coating or two of shellac over Watco.
I have not, but I don't see why that would not work. Test first on a scrape piece of wood, that is what I always do when I try something new in finishing.
😂 the cap!! It's so true
Right! Hate that cap. Thanks for watching.
I opened the cap with the exact same channelocks!
Or as we call them, the Danish Oil can openers. :)
Thank you very much for the helpful video. May I ask how you would advise to clean the furniture/cabinets once the Watco Oil has been applied? Would wiping down with a damp (with water) cloth from time to time be the best solution? Thank you.
Yes that will work. I also use furniture polish too.
@@MadNerdWorkshop Thank you.
Thank you for a great video. Question: Can you apply a paste wax over Watco once it has cured? Appreciate your opinion.
Thank you. Yes you can, just give it at least 72 hours ( I like to give it a week). Thanks for watching.
Thanks for the video.
I've been using the same Watco brand Danish Oil for years, but I'm planning to buy the Tried and True Danish Oil for two reasons: It's polymerized (which is supposed to be better but don't ask me to explain how), and it's food safe. I only plan to put it on furniture (and not around children/food), but the main benefit is that it won't stink up my house with who knows what kind of toxins. I'd love to see you give the T&T a try and make a video.
Based on one video I saw, I think I'll probably do two coats of T&T Danish, then 2 coats of T&T Original (which includes beeswax). This will be for a solid cherry desk.
I was looking at it and I may have to try it. Thanks Merchantbankers.
I love Tried and True products, but want to say that I find Watco danish oil and Tried an True danish oil to be just different products. TnT is basically pure heat polymerized linseed oil, it works just like regular linseed oil and dries just a touch slower. Great for food turnings I do, you can eat off it next day no problem. They also have a variation with beeswax in it, which one can cook up themselves by mixing oil to wax in 10-20:1 proportions give or take. Watco stuff has linseed oil, but it also has varnish of sorts, I'm not sure if it's just alkyd resin or has polyurethane in it. But between home brew danish oil of polyurethane, linseed oil, and thinners, and watco, the end finish is remarkably similar. Just wanted to give you this info. TnT also has a varnish oil which I think is a mixture or linseed oil and pine rosin(?) varnish, although I haven't tried it.
🙏
Thanks for watching.
I have a sideboard that was refinished using WATCO Danish Oil. I would like to paint the base of the sideboard with chalk paint and leave the cabinets and drawers fronts natural walnut. How do I prepare the sideboard before using the chalk paint?
I have never done that, but I would think all you need to do is sand it and paint with the chalk paint. like you would anything else.
This a great video! Thank you! I will be using fruitwood Watco Danish oil on purchased unfinished maple cabinets. I have read to lightly sand with 400 grit sandpaper prior to applying the finish as it has already been sanded by the manufacturer. Do you agree with that? Is hand sanding fine to do. I have read an orbital sander may leave scratches. Also, I may want to do more than one coat to deepen the color. (I know you only use the natural Danish oil.) Do I need to sand between coats? Any other suggestions for me. I am new at this. I appreciate any suggestions you can give me. Thank you!
Good question, I only sand to 220 when you go finer, depending on the wood, the oil does not penetrated as deep. Danish oil's finish is by penetrating into the wood, it doesn't sit on top like other finishes. It does offer some protection but not as much as say poly. Hand sanding is fine and going to 400 will be ok to do. I use an orbital sander only on the cabinets and with my last pass, the only pressure on the sanding pad is from the weigh of the sander, I don't push down on the orbital sander. You can do more than one coat but after about two it will not soak in anymore so I don't think you will get any deeper color. But I am not sure on that one. I would try a number of coats on a scrape piece and see how it does each time. Good luck with your project and thank for watching.
Thank you for your help!
Hello sir,
Great info. I am wondering what your thoughts are on applying lacquer on top of danish oil. It is for a pies which will be living outside. Can it be done without ruining the danish oil, and make it more durable against the weather. Thanks for your videos.
Not so sure about Lacquer, but you can apply Varnish after a 72 hour drying time.
I just spent a week designing and building a couple of unique calendar frames out of big box select pine wood. They came out great. However finishing them, can be nerve-wracking. From what I've seen on RUclips, Danish Oil, seemed like a great idea. Looked very easy to apply! However I used a dark walnut danish Oil. After applying in the manner suggested, the finish looks horrible. It is very blotchy. Before applying, I started by sanding with 80, 120,180, and 220. i wiped it down with a tack cloth. The wood was ready, however and It came out looking very Blotchy!!! It looks like a leopard print. From what you said, I can sand it with 500 grit paper then reapply?!?
If you have any other suggests, please let me know!!! The one thing you didn't mention was how the ends of the board suck up the oil and are considerably darker than the rest of the wood!!! Look forward to hearing from you.
Sorry to hear that Danasaunders. Pine is a tough wood to stain. One of the reasons I only use the natural Danish Oil. anytime you use stain on soft wood you run the chance of have some blotchy (actually most likely). You will have to sand it down and there are some product out there to apply first before adding any stain, such as this: amzn.to/3uCbrpA. There are many pre-stains that will help to prevent the blotchy stuff. Just make sure it will work with the danish oil. All stains will go darker on the end grain. One thing that can help a little is sand the ends with a finer girt sandpaper so that it won't suck in so much stain. Good luck with it.
Would the oil work well on a golden oak table top that isn't fully sanded. Some of the old finish is still on and it isn't uniform. Will a coat or two of the oil make it all look uniform???
only if the finish is also oil. Otherwise you would be better off sanding it all the way down.
I like to work with pine and regular oil-based stains (Minwax). Can I use Danish oil to finish stained pine?
Thanks
I would think so, but I have never tried it that way. I don't work with pine that much. Try it on a sample piece first to see how it works. Good luck on your project.
if im using this on a butcher block for a desk top should I fully finish coating one side and then work on the other rather continually flipping as you are
I would flip it. There is really no reason not to because you end up wiping it off as the last step. Just make sure it is sitting on something like pint pyramids so it won't stick.
I’m about to do this with a butcher block, did you end up doing both sides? I only have a pint of watco and I really don’t want to be flipping it constantly, as my 5ft block weighs nearly 100 pounds
I always remove the plastic cap and just leave the metal one. Which can still be a pain but at least removable by hand.
That is exactly what I do Wreckoningday.
Is it possble to use Danish oil with a stain OVER an already coated natural oil finish? I did the leaves for a table in natural, and wish it had a bit more cherry color? The table (and chairs) are solid cherry and I want them to "look" like cherry...
The Danish oil needs to soak in so I am not sure how well that will work. Try it on a small section that won't show and see if it is what you want.
Can Danish oil be thined? I have a part I make it'd like to dip in the oil to help it resist water.
Yes it can, and it will make it easier to apply. This works really well with older danish oil that thickens up over time. But don't thin it too much.
Is there any special considerations for applying to a vertical surface? I had an bay window installed (vinyl clad outside unfinished wood inside)and after watching several videos am concerned Danish oil may not have been my best pick for finishing the inside.TIA!
no special consideration for vertical, if you are using a rag to apply it. What would be your concerns for it being applied on the inside?
Hey, thanks for the tutorials, but is there anything wrong with using the Danish oil, that's colored and then use teak oil on top of that?
Not really, the only thing that I can think of is that both are a type of penetrating oil and if you use Danish oil, that has penetrated the wood. There may not be much ability for the Teak oil to soak into the wood. But I have never tried that so I am not sure about the results. Try it on some scraps of the same type of wood first and see what it does.
OK thanks, I just have been using urethanes for over 30 years and penetrating oils are new to me.
I just used danish oil to finish a kitchen countertop. Now I’m worried I should have gone with a food safe sealer. Any thoughts on danish oil on kitchen counters with a sink?
The nice thing is you can use just about any countertop sealer over the danish oil. I would try to put some type of food safe finish on top of it and it will also make it much durable.
How many Danes must be pressed to get a bottle of Danish oil?
That is a question I have no answer for :), but thanks for watching.
Can you use this over another oil based stain
You could but it won't penetrated that wood as much and you won't have a lot less protection from the Danish oil. You can get the Danish oil with stain already in it, if that helps.
Do you have issues with blotches on maple?
Not with the natural.
I put two coats of Danish oil to a serving tray. Do I need to add a polyurethane over the Danish oil?
You do not. All the poly will do is make it a little more durable.
@@MadNerdWorkshop thank you.
Problem with Watco Danish Oil is that it is 80% thinner, better to make your own.
To use lacquer over Danish Oil, spray a coat of shellac.
I agree you absolutely can do that. Thanks for watching.
Great product, have used it on my furniture for 50+ years. The cap should be re-engineered.
I agree with you on that reduggan.
Is danish oil durable enough for something like cabinets?
I used it on mine, and then covered it with wipe on poly. Danish oil is durable but it will wear and not super waterproof. But the nice thing is that it is easy to touch up and make new again anytime with little prep work.
If Danish oil is basically oil+varnish why not durable? I heard that it’s not so durable but why?
Mainly it soaks into the wood and not build up like regular varnish does. It does give a somewhat durable finish, but not like a varnish would. The nice thing is it is easy to refinish later on.
@@MadNerdWorkshop Thank you! So it’s more durable than oil and less durable then varnish? So this is a “between” kind of stuff?
Those Watco caps are of the devil! They really need to use something better.
hopefully some day they will. Thanks for Watching.
Worst cap design known to man. Someone should be fired. I curse these cans every time I have to open one
I am 100% with you Bryan.
Seriously never goin to buy this shit again just becau of this
Sorry I made it look that bad.