This is the only video I've found that actually shows you how the motherboard, ssd, etc. fits into this specific case -- On my first build right now and this helped immensely, thank you!
The amount of work u put into that description is unheard of props to u and working so hard on this video if ur this dedicated i believe you will do very well
Thank you for doing this overview of the case. I’m building a new Gaming PC for the first time, and this video gives me a great idea on what my case should look like with the parts in it!
@@TheProvokedPrawn prawn the thing is I want to assemble a PC in 2020 but I'm confused looking for the case I'm interested in NZXT but I'm confused which series h is good 😅😅😅 No problem
Yes, I put the rad fans the wrong way around. Don't copy that. I'm human. I make errors. See the build guide for info on how to install the cam hub for lighting and fans. sta3-nzxtcorporation.netdna-ssl.com/uploads/download/attachment/762/H510i_H510-manual-ver4-041919.pdf
@@arctic922 best of luck. Btw one thing is I did swap the AIO fans and turn them the other way around. Otherwise more fans can't hurt but it's run fine without so far.
@@majesticdorito6962 im really happy with my case. It looks really basic but with a modern style. The airflow is alright (2 Fens inside the case / i bought a AMD Cpu cooler fan too) This Case is really good for cable management. For me the airflow is good but if u want get a better airflow u should buy the H510 Elite btw i have the H500i (RGB)
Thanks for the review, I just bought this case for a build with the red stripe. By the way, you sound like the dude in Postal 2 haha. I say that as a compliment.
FYI, if you want the Velcro strips to work, put the cabling under the whole thing (both layers), then tighten the Velcro down and stick it together. I.E, pull the Velcro out of the slot on the left, lay all the cables in the track, then thread the Velcro back through the slot and pull to tighten it, sticking it back to itself.
Thanks man, I am an idiot. I bought normal fans just to find out that I need liquid cooling for this case lol, thanks to u now I know what I need, cheers!
@@TheProvokedPrawn well here’s the problem, one of my fans could fit in (120mm) but what I figured out is that there’s no place to screw it into, however the liquid cooling brings the screws and the holes which is why it works, so currently I am not sure what to do, however I could use the fans for outtake, but I am not sure if I should do it since the fans that come in the case are already really good
I plugged the fans into fan splitter and plugged it into the mother board but you can also just leave them there keep them connected to the smarts huh and it should work just make sure the smart hub is plugged into the motherboard
I missed this comment. Apologies. The front panel connectors connect directly to your motherboard. You have to check motherboard manuals for that. The fans are connected to the hub, that then needs SATA power from the PSU.
I like NZXT's industrial design aesthetic. I wish they offered more cases in a wider array of configurations. For example, I'd love to see the NZXT take on the Corsair 5000D. I like your attention to detail in the way you do your commentary, and the way you shoot these. Really enjoyable.
Awesome vid, helped me to decide which case to buy, definitely going for this one. But where did you get these beautiful white sleeved cables from? I dont want to spend much on cables, do you have any tips where to buy that sort of stuff from?
Hello! I believe they're left over from this ruclips.net/video/QxW6yFZavS8/видео.html I used a mix of the standard cables included with that PSU and the premium sleeved ones from Corsair too. They're a bit of money but well worth it imo.
@@01iverQueen They won't let you use the toilets / restrooms. Even urgently. Poor form. I escalated to Cranbourne manager Shane and politely requested many times but he was an uncourteous parrot repeating same thing, treat you like an animal. Busting and first time there they said go to the pub or shopping centre which we don't even know the area! Wtf What a joke. Let's see what action will be taken? I'm lodging formal complaints in detail to DHS. Pathetic conduct and appalling response by Shane ruined our morning. He better hope his own mother does not have a full bladder in public and embarrass herself. Prik This is the first government site I've been to that doesn't allow use of on-site water facilities. If they book us there again I'll drink a cup of coffee beforehand, 2 litres of water for hydration, 1 litre of Cola so my urine is yellow, and pss myself on their floor so they can wipe it, for wasting our time and saying the same crap over again. Star is for the pleasant to deal with interviewer Dani. Interpreter on call was also decent this time round.
I just bought one of these cases. The only missing part of the video and in the manual is that if you are not going to use the LED, tuck those 3 connectors away that look like they need to be plugged in somewhere for the fans to work. They are not needed and the fans will work fine.
i woiuldnt because theres been some tests with more fans, adding 2 intake fans and it chocked them and actually made it worse nzxt placed the fans for negative pressure which is best for this case
did you get it? I got this case and im not sure if I should put two intake fans where the radiator should go... I was thinking about getting an aio cooler soonish, but I wouldant mind knowing if the temps would be fine with the back and top exhuast fans and no fans at the front or if I should put two fans at the front.
@@slite3276 Yep! it looked cool on initial setup but things got tight pretty fast once I put in a 3080 and a kraken x63. At this point I figured i'd make it look cool since the card literally has about 1-2 mm clearance up against the radiator horizontally, so I put it on a vertical mount. I have two high RPM intake fans at the top and back and two exhaust fans pointing down, screwed onto the bottom guard plate against the vents, forcing air to the bottom openings of the case (after some really really intense cable management to make sure there is airflow). Two fans are in the space between the front panel and the radiator fans, using those to try to force any air out the front and side vent openings. Not the best but it runs pretty cool and does look nifty, albeit a bit cluttered. dust surprisingly isn't too much of an issue
@@robbiealixsantos ah im running a rx 6700xt with a ryzen 5 5600x with stock cooler rn, was just trying to see if temps would be fine withought me adding anything or if i should wait and get a aio cooler for the cpu
This case has negative airflow so I am just curious if the fans would be better suited on the other side of the rad next to the holes in the front of the case? Seems like you might be drawing warm air from the GPU with this layout.
thank you for telling me about being able to remove the stupid channel at the bottom. I built one of these for my Plex server and since I use Hard drives when I put in the modular power supply the cables take up most of that lower area making adding additional hard drives very difficult.
@@aliabdullah6753 I mounted the AIO fans the wrong way around on the radiator. People kept telling me so I just thought I'd let everyone know to save the bother of them wasting time abusing me.
I wish you had spoke about the build more and what you were using etc as this is my first build and the main reason I clicked on this video. Going to have to look for another one
Is it possible to place the fans up front of the radiator? So you could have more space for the longer GPU's ? I'm planing on building a new PC with this case, AiO and longer GPU (290/300 mm), just been wondering if the GPU can fit with your configuration (2 fans at the back of the rad).
I don’t understand how to install a micro ATX motherboard into the case. Can someone help. I changed up the things but they still don’t barely line up.
I'm interested in this case. I wonder if the USB type-C socket can be connected to USB 3.1/3.2 Gen 1 socket on the motherboard. Pls advise, thanks in advance.
My exact question. I am using the "ASUS AM4 TUF Gaming X570-Plus (Wi-Fi) ATX". My mobo does not have an internal type c header. If the type c will hook into a regular usb header with slower speeds- that would be fine. Would that work?
Just built a pc using this case. The built in fans work, but not the rgb leds... any idea? I downloaded the NZXT Cam software and messed around in lighting, but it still has not worked. Any help would be appreciated!
I am using the same case but with the MSI-A-PRO Z390 motherboard, once putting the cpu in it looks like a really tight fit (motherboard into the case) im scared to scratch the motherboard. Any advice?
Awesome video, thanks for the info!! I’m planning a build with this case and the new nvidia 3080, what do you honestly think about the fans that come with the case? I’d install kraken water cooling for the CPU but do you think the kit fans that come with that case need upgrading or do they do the job? Many thanks! Would love to see a follow up vid
Hello, How do you connect the system pannel to the motherboard? I have the short cable with the power SW, HDD LED and PLED at one end but can't figure out where the other end goes into. Most videos I watched seem to have a cable that gets plugged into the needles on the motherboard.PLease help
Does it feel too big on the desk? I currently have nzxt h200 but i'm having heat issues with it gpu temp limit is locked at 75c but it goes upto 84c while gaming which sucks, I get heavy lag/ latency things in games after 10/15 mins of gaming..
I’m building a new PC and I put an MSI z390 gaming plus mobo into the case but it doesn’t have enough connectors for all of the RGB cables. is there anyway I can get adapters that will make it compatible with all of the lights lighting up
Yes, i was inexperienced and useless when I made this I guess. If you need hand holding, try this much more in depth video ruclips.net/video/EDeff9DbFG8/видео.html
can you install the SSD on the shelf covering the PSU? i saw some pictures where its done this way but i didnt see any SSD slots or mounting points on there
can that bracket inside the case, to the right of the motherboard be removed? i have a thicc radiator, and it won't fit in there. or.. do you know the max radiator clearance there. I have an Arctic Liquid Freezer II 280. Do you know if this will fit?
Great video - loved the timelapse! Found the case that I'm going to put my X299 system in, My favorite things about this case is the vertical graphics card mount, and the velcro cable management straps. Cable management: something I suck at, so hopefully these will prompt me to tidy my next build (altho current one I stripped and redid and looks a lot better!)
Hi, I have the exact same case in white. I'm using a factory AMD air cooler for my CPu But I want to switch to a 2400mm AIO. Its ok to mount the AIO tube up like you do in the video or should I buy a 120mm AIO to put at the top of the case ?
If I use a asus b450-f will I be able to use the usb c port on the front because I don’t know if the board supports it or not? (This is my first ever build)
FOR your AIO fans I notice you put the rad in place first with the fans on the inside of the case. Are they pulling air into the case from the side vent or are you pushing air out? just curious as I'm upgrading to a 12core CPU that will run hot and trying to figure out best air flow set up.
Hi so I was building my pc and I found out that the front panel connectors are like maybe 2-3 inches long I thought it was coming from the case and it’s a 6 pin layout where it connects to something do you know what it connects to?
Excellent video I liked the shots, just a tip, a question, advice: more direct light to the product. Question? Why do I place the AIO fans like this? if all fans draw air where does it enter? Shouldn't it have a flow line? have a great afternoon.
ive got a b550 steel legend and i cant seem to find the place where the led strip connector pins go, its a full atx mobo so im totally confused on where they plug in
How are the thermals on this? I'm planning on using the H510 (I'm sure they're both basically the same with minor things added to the H510i) and I'm worried that the temps are going to be high. No one has a video on the H510 so I can't be sure.
Hi I’m planning to build a PC and going to get the NZXT h510 (basically same case) and was wondering to know if the 2 stock coolers would be enough with the water cooler. The water cooler I’m getting is the coolermaster ml240l.
The Provoked Prawn another question, what is the benefit of daisy chaining fans together? Would the aio software not be able to see the case fans if they were just plugged into a fan slot in the motherboard individually? Do they need to be daisy chained in order for, for example cam software to be enabled? Thanks for all the help! Building my first PC!
The airflow is almost nonexistent at the front due to a very small area to let air in and a 90 degree turn for the air to make. I'm not sure as to whether it would fit but you certainly wouldn't get amazing performance
Anthony Vallecillo it does indeed fit I just installed it. The case is made for air to be sucked in through the front which is why there is a dust protector there. Have had no issues temperature wise and am running an I7 9700k and a 2070 super
Question. How have you placed your fans around the case? Are all of them in exhaust positions or are just the front ones exhaust and back intake? Just curious if the fans on the AIO radiator should be blowing on or sucking air in towards it.
So u know how u had the front of the fans facing the cpu on the h100i liquid cooler? I just realized I put my fans facing the other way is it a preference thing ?
definitely one of the things to look out for when pairing a motherboard with this case, you need the USB Type C 20 pin header, which I don't think your referenced motherboard has.
Danh Nguyen what is that, I’m building in the case with the ASUs tuf x570 WiFi and I turn on the psu and only the motherboard lights turn on after “trying to turn on the case” would love some help as for me I have the power switch of the case going directly into the psu like it says to do. Any thoughts would be great !
@@jerrymaddox8255 So my initial comment was in regards to the USB Type C Port that is on the top panel of the case near the front. In terms of your issue though, its best simplified: Power supply plugged into Motherboard via Power Cable Motherboard connected to the Case, via a power switch cable. Once complete, the button in the front should be able to power up the computer itself. I would suggest you refer the case manual to ensure you have the proper set up.
@@nguyendd31 My exact question. I am using the "ASUS AM4 TUF Gaming X570-Plus (Wi-Fi) ATX". My mobo does not have an internal type c header. If the type c "case wiring" will hook into a regular usb header with slower speeds- that would be fine. Would that work?
Hello, if I have a single radiator AiO cooler where would you recommend I place it at? Rear or top front bracket? Should it also be an intake or exhaust? Thank you
Top is the best place for AIO always, back is good, front good but not that good, bottom is a No. Front is not that good because it exhaust hot air into the case instead of fresh air.
I have the same exact case. and I was told by a friend that the way Me and you both have the AIO mounted is incorrect that air gets trapped at the top of the radiator and in the pump, is that true, If so is it just NZXT having false promotional cases like that?
0:00 Box details and intro
1:20 unboxing
2:20 Close up shots
3:44 Side panel removal
4:18 Front panel fan tray removal
4:55 Rear panel removal
5:25 Rear internal close ups
6:39 Cables, ties and screws
8:05 Corsair cooler setup
8:26 Motherboard preparation
8:45 PSU installation
9:06 Motherboard installation
9:42 AIO installation
10:16 2.5-inch SSD install
10:45 Power cable install
11:29 GPU installation
11:55 Vertical GPU mounting
14:40 Peel
Does a watercooling make sense in this case? I heard the airflow should be weird
The hero we didn’t deserve
Im having trouble with the fan built in witht the case yknow where those connections go?
i cant seem to figure out how to remove the fan bracket, every video i have seen it looks so easy but i can't get it out of there
This is the only video I've found that actually shows you how the motherboard, ssd, etc. fits into this specific case -- On my first build right now and this helped immensely, thank you!
You're welcome. Hope you enjoyed enough to subscribe!
Sameee
I would of loved to see a ''night time'' look at it with just the RGBs and lights and how it looks in the dark. :)
+1
+2
+3
+4
+6
The amount of work u put into that description is unheard of props to u and working so hard on this video if ur this dedicated i believe you will do very well
Thank you for doing this overview of the case. I’m building a new Gaming PC for the first time, and this video gives me a great idea on what my case should look like with the parts in it!
If you haven't already, get the white version of the case it looks very nice in my opinion, its the one I have. I'm just waiting on my gpu to come.
For those asking, this is the riser/vertical mounting cable - ruclips.net/video/eg_Dw0vSA5Y/видео.html
Hi prawn I'm confused between this nzxt case I want to take which h500i or h510i and h700i
@@user-ev6or3cr6b the h700i is obviously the top of the range. Other than that I don't know the differences unfortunately.
@@TheProvokedPrawn OH Oky thanks you prawn 😅😅
@@user-ev6or3cr6b sorry
@@TheProvokedPrawn prawn the thing is I want to assemble a PC in 2020 but I'm confused looking for the case I'm interested in NZXT but I'm confused which series h is good 😅😅😅 No problem
Thx for the guide. I just ordered this case and this video will definitely help when the case comes in so I can build it
did u go and or intell? basic question will any and board fit the case? thanks
This is what I’m doing lol
Yes, I put the rad fans the wrong way around. Don't copy that. I'm human. I make errors.
See the build guide for info on how to install the cam hub for lighting and fans. sta3-nzxtcorporation.netdna-ssl.com/uploads/download/attachment/762/H510i_H510-manual-ver4-041919.pdf
Hey. I was wondering what temps you were getting with that fan setup? Is it good? I have the same case and aio.
@@arctic922 not had any problems.
@@TheProvokedPrawn thanks! I will use the same fan config! U earned a sub dude. Hopefully ur channel gets rlly big
@@arctic922 best of luck. Btw one thing is I did swap the AIO fans and turn them the other way around. Otherwise more fans can't hurt but it's run fine without so far.
@@TheProvokedPrawn are the temps okay the way you showed in the video tho? As i would like to able to see the rgb
First of all, good Video :)
I bought this case (in White) today.
And some White cablemod cables...
btw. i love how you placed the GPU!
u got my Sub
hows the case? iv been looking around for a case for my first build and really like this one but is the airflow good that's my main concern
@@majesticdorito6962 im really happy with my case. It looks really basic but with a modern style.
The airflow is alright (2 Fens inside the case / i bought a AMD Cpu cooler fan too)
This Case is really good for cable management.
For me the airflow is good but if u want get a better airflow u should buy the H510 Elite
btw i have the H500i (RGB)
Thank you for being the only human being in existence to actually vertically mount a GPU in these kind of cases.
Is that sarcasm?
love seeting all the funko figures in the background lol
Your cable management is so good : D
It really isn't. But thanks!
How’s airflow on the aio through the front
Pushing the air outside? I'm very confused
Tacarmato airflow, air comes in, gets pushed out.
@@stiffy7004 but the aio fans are set as exaust they are pushing air out just like the back and top fan ???
I'm confused about that radiator setup as well. Aren't those fans supposed to push air out? Are the other fans bringing air in then?
On NZXT channel they have the AIO mounted the other way. It specifically says to do so.
Hey man quick quesion, did you connect the USB 3.1 Gen 2 cable to use the USB port from the case?
Thanks for the vid , i just bought this exact case . What’s the thing you put (corsair branded) behind the gpu ?
ruclips.net/video/eg_Dw0vSA5Y/видео.html
How about all tempt?donno want to buy this case or lian li 011
Temps are fine. 60-75 on gpu, 60-78 on cpu
Mehdi .E what cpu and cpu cooler u using ?
Still have my Nzxt H2 from 2012, love that brand, i'll stick to Nzxt for my next one.
"Fannage" - Legit word :) aha! :P Love the vid man.
Hehe. Glad you liked it. Hope you enjoyed enough to subscribe.
Thanks for the review, I just bought this case for a build with the red stripe. By the way, you sound like the dude in Postal 2 haha. I say that as a compliment.
Never played the Postal games but appreciate the feedback! ;) Hope you enjoyed enough to subscribe.
@@TheProvokedPrawn Just did! Thanks!
@@BrawndoQC no. Thank you!
The Provoked Prawn
How to remove standoffs please help
Ayoub use your fingers.
FYI, if you want the Velcro strips to work, put the cabling under the whole thing (both layers), then tighten the Velcro down and stick it together. I.E, pull the Velcro out of the slot on the left, lay all the cables in the track, then thread the Velcro back through the slot and pull to tighten it, sticking it back to itself.
Thanks man, I am an idiot. I bought normal fans just to find out that I need liquid cooling for this case lol, thanks to u now I know what I need, cheers!
I'm not sure you "need" it. You could use standard fans and a traditional CPU radiator. It's just what I had.
@@TheProvokedPrawn well here’s the problem, one of my fans could fit in (120mm) but what I figured out is that there’s no place to screw it into, however the liquid cooling brings the screws and the holes which is why it works, so currently I am not sure what to do, however I could use the fans for outtake, but I am not sure if I should do it since the fans that come in the case are already really good
where do I plug in the power cable that is included in the case and also the cables from the pre-installed fans
Did you ever figure it out? I’m building in this case right now and I’m lost using a B450 Tomahawk mobo
Hold on I will tell you in 10 mon
Landon Smith lmao same
I plugged the fans into fan splitter and plugged it into the mother board but you can also just leave them there keep them connected to the smarts huh and it should work just make sure the smart hub is plugged into the motherboard
I missed this comment. Apologies. The front panel connectors connect directly to your motherboard. You have to check motherboard manuals for that. The fans are connected to the hub, that then needs SATA power from the PSU.
Amazing video! Did amazing reviewing the case, really helped me out whether or not to buy this case!
Where did u plug in the rgb strip power connector on the motherboard
it plugs into a sata power connector from your PSU
I like NZXT's industrial design aesthetic. I wish they offered more cases in a wider array of configurations. For example, I'd love to see the NZXT take on the Corsair 5000D.
I like your attention to detail in the way you do your commentary, and the way you shoot these. Really enjoyable.
Their more recent H7 Flow is similar ruclips.net/video/gUWBUH3PXA0/видео.html
Awesome vid, helped me to decide which case to buy, definitely going for this one. But where did you get these beautiful white sleeved cables from? I dont want to spend much on cables, do you have any tips where to buy that sort of stuff from?
Hello! I believe they're left over from this ruclips.net/video/QxW6yFZavS8/видео.html
I used a mix of the standard cables included with that PSU and the premium sleeved ones from Corsair too. They're a bit of money but well worth it imo.
Check cablemod the aren't that expensive
@@01iverQueen They won't let you use the toilets / restrooms. Even urgently.
Poor form.
I escalated to Cranbourne manager Shane and politely requested many times but he was an uncourteous parrot repeating same thing, treat you like an animal.
Busting and first time there they said go to the pub or shopping centre which we don't even know the area! Wtf
What a joke. Let's see what action will be taken?
I'm lodging formal complaints in detail to DHS.
Pathetic conduct and appalling response by Shane ruined our morning.
He better hope his own mother does not have a full bladder in public and embarrass herself. Prik
This is the first government site I've been to that doesn't allow use of on-site water facilities.
If they book us there again I'll drink a cup of coffee beforehand, 2 litres of water for hydration, 1 litre of Cola so my urine is yellow, and pss myself on their floor so they can wipe it, for wasting our time and saying the same crap over again.
Star is for the pleasant to deal with interviewer Dani. Interpreter on call was also decent this time round.
I just bought one of these cases. The only missing part of the video and in the manual is that if you are not going to use the LED, tuck those 3 connectors away that look like they need to be plugged in somewhere for the fans to work. They are not needed and the fans will work fine.
I was wondering about buying this case. Would you recommend installing more fans to the case?
i woiuldnt because theres been some tests with more fans, adding 2 intake fans and it chocked them and actually made it worse
nzxt placed the fans for negative pressure which is best for this case
@@localito983 that's pretty much bs
@@smjiqu4145 agreed
@@Cm6D it's not lul
This is great! I was on the fence about getting the case with liquid cooling.
did you get it? I got this case and im not sure if I should put two intake fans where the radiator should go... I was thinking about getting an aio cooler soonish, but I wouldant mind knowing if the temps would be fine with the back and top exhuast fans and no fans at the front or if I should put two fans at the front.
@@slite3276 Yep! it looked cool on initial setup but things got tight pretty fast once I put in a 3080 and a kraken x63. At this point I figured i'd make it look cool since the card literally has about 1-2 mm clearance up against the radiator horizontally, so I put it on a vertical mount. I have two high RPM intake fans at the top and back and two exhaust fans pointing down, screwed onto the bottom guard plate against the vents, forcing air to the bottom openings of the case (after some really really intense cable management to make sure there is airflow). Two fans are in the space between the front panel and the radiator fans, using those to try to force any air out the front and side vent openings. Not the best but it runs pretty cool and does look nifty, albeit a bit cluttered. dust surprisingly isn't too much of an issue
@@robbiealixsantos ah im running a rx 6700xt with a ryzen 5 5600x with stock cooler rn, was just trying to see if temps would be fine withought me adding anything or if i should wait and get a aio cooler for the cpu
it is also loud as hell fyi, I think you can probably be more conservative with your fan usage
Enjoyed this? Subscribe to The Prawn!
Can you put a 3 fan graphics card in there.
@@rideforlife85 no
you have the voice of an airplane pilot. i love it
Thanks? :) Hope that means you have subscribed!
Do you recommend putting the psu in upside down?
The case has mesh filters and feet, so yeah it can keep cooler that way.
This case has negative airflow so I am just curious if the fans would be better suited on the other side of the rad next to the holes in the front of the case? Seems like you might be drawing warm air from the GPU with this layout.
How the heck do I open the glass side panel it’s so weird I feel imma break it
There’s a thumb screw on like the back closest to the glass unscrew it and carefully pull the glass up and out
Leo Dunne no you don’t pull it up btw you pull it down towards urself
Code Orbitz ya sorry haven’t opened mine ina while lmao
Looks like you installed the front radiator fans as exhaust instead of intake.
Yes. I pinned a comment to say as much
thank you for telling me about being able to remove the stupid channel at the bottom. I built one of these for my Plex server and since I use Hard drives when I put in the modular power supply the cables take up most of that lower area making adding additional hard drives very difficult.
You have the same mobo and case as the compuyer I’m building thank you so much you have saved me especially with the aio
Please take care to note my mistake. The fans on the AIO need to be the other way around
I AM AN IDIOT.
Why
@@aliabdullah6753 I mounted the AIO fans the wrong way around on the radiator. People kept telling me so I just thought I'd let everyone know to save the bother of them wasting time abusing me.
@@TheProvokedPrawn lmaoooo
The Provoked Prawn IK this is 8 months later but, did you just have to put the fans on the other side or flip the direction of the air?
@@NotGoodAtRUclips yes
I wish you had spoke about the build more and what you were using etc as this is my first build and the main reason I clicked on this video. Going to have to look for another one
If you mean the specs they're in the description. If you mean I missed other details then I'm sorry I let you down
@@TheProvokedPrawnNo not the specs lovely. I’m talking about the cables
@@Zoliaalbregoofficial ruclips.net/video/EDeff9DbFG8/видео.html
Is it possible to place the fans up front of the radiator?
So you could have more space for the longer GPU's ?
I'm planing on building a new PC with this case, AiO and longer GPU (290/300 mm), just been wondering if the GPU can fit with your configuration
(2 fans at the back of the rad).
Whoever disliked this video doesn't like well informed straight to the point videos
Thanks! 205 people!
Had to sub because this helped me out alot on my first pc build
Glad to help. Please note I made a mistake (pinned comment) the fans on the AIO are the wrong way around.
Yo bro
Very nice video👍🏼
You showed everything very good👌
I aim to please. Hope you enjoyed enough to subscribe 🍤🦐
Yes i will😉
I don’t understand how to install a micro ATX motherboard into the case. Can someone help. I changed up the things but they still don’t barely line up.
Is the psu fan supposed to be facing down?
I am not sure. If should get h510i or h510 elite. My build is Amd 3600x msi 2060 gaming z and nzxt kraken 53x
vertical mounting cable hmmm. That graphics card airflow seems to be limited by the glass.
It's fine
@@TheProvokedPrawn Did you notice any performance loss with vertical gpu? I have the exact case and I would want to put it on vertical...
I'm interested in this case. I wonder if the USB type-C socket can be connected to USB 3.1/3.2 Gen 1 socket on the motherboard. Pls advise, thanks in advance.
My exact question. I am using the "ASUS AM4 TUF Gaming X570-Plus (Wi-Fi) ATX".
My mobo does not have an internal type c header. If the type c will hook into a regular usb header with slower speeds- that would be fine. Would that work?
I feel you. no one seems to have the answers anywhere online
I returned the TUF and got the ASROCK X570 Tachi. It has the front USB type-C. Problem solved. $100 extra spent.
@@johnny-z so I'm guessing the front panel type c needs a type c header on the motherboard to work?
@@khai3502 YUP
How did you connect the front panel cords? I had to use an adapter that came with my motherboard that split the pins to individual connections
Exactly, I couldn’t finish my build and I watch so many videos
@@ValidX1 were do I plug it in please help
Pulse SweatZ did u guys ever figure out how
Thanks for the vid. Question about the AIO cooler: can its tubing run underneath that metal bracket in the case?
amsid yes
Just built a pc using this case. The built in fans work, but not the rgb leds... any idea? I downloaded the NZXT Cam software and messed around in lighting, but it still has not worked. Any help would be appreciated!
I am using the same case but with the MSI-A-PRO Z390 motherboard, once putting the cpu in it looks like a really tight fit (motherboard into the case) im scared to scratch the motherboard. Any advice?
Awesome video, thanks for the info!! I’m planning a build with this case and the new nvidia 3080, what do you honestly think about the fans that come with the case? I’d install kraken water cooling for the CPU but do you think the kit fans that come with that case need upgrading or do they do the job? Many thanks! Would love to see a follow up vid
Hello, How do you connect the system pannel to the motherboard? I have the short cable with the power SW, HDD LED and PLED at one end but can't figure out where the other end goes into. Most videos I watched seem to have a cable that gets plugged into the needles on the motherboard.PLease help
The short cable is the one at around 6:50 min on your vidoe
Radiator Anti-Static setup - love to see it, only in the UK
Just a question, how did you flug 2 more fans with the device only being able to have 3 fans plugged in?
Motherboard fan headers
Hi what is that cable called that you have used at 12:12 to connect the graphics card to the motherboard to have it in that positioln ?
pcie riser cable. Look for a good quality one (corsair, thermaltake etc.)
@@andreicojocaru5758 thanks for the help :)
Does it feel too big on the desk? I currently have nzxt h200 but i'm having heat issues with it gpu temp limit is locked at 75c but it goes upto 84c while gaming which sucks, I get heavy lag/ latency things in games after 10/15 mins of gaming..
I’m building a new PC and I put an MSI z390 gaming plus mobo into the case but it doesn’t have enough connectors for all of the RGB cables. is there anyway I can get adapters that will make it compatible with all of the lights lighting up
Thanks for glossing over the cable connection portion the only part I need and part every tutorial on the online loves to ivnore
Yes, i was inexperienced and useless when I made this I guess. If you need hand holding, try this much more in depth video ruclips.net/video/EDeff9DbFG8/видео.html
Great Build, does the case come with white wires?
No, they're with the PSU
can you install the SSD on the shelf covering the PSU? i saw some pictures where its done this way but i didnt see any SSD slots or mounting points on there
can that bracket inside the case, to the right of the motherboard be removed? i have a thicc radiator, and it won't fit in there. or.. do you know the max radiator clearance there. I have an Arctic Liquid Freezer II 280. Do you know if this will fit?
Great video - loved the timelapse! Found the case that I'm going to put my X299 system in, My favorite things about this case is the vertical graphics card mount, and the velcro cable management straps. Cable management: something I suck at, so hopefully these will prompt me to tidy my next build (altho current one I stripped and redid and looks a lot better!)
Thanks, glad you liked it, hope you enjoyed enough to subscribe. Cable management is a nightmare. xD
Great vid but it looks like all of your fans are setup to exhaust. Would it not suit better to run the front as an intake?
Yes
Hi, I have the exact same case in white. I'm using a factory AMD air cooler for my CPu But I want to switch to a 2400mm AIO. Its ok to mount the AIO tube up like you do in the video or should I buy a 120mm AIO to put at the top of the case ?
Tubes up is fine as long as the pump head isn't the highest point in the system. Make sure you don't put the fans the same way around as I did though.
Do I need a gpu stand to place it vertically on this case? Also do you think it can handle an rtx 2080 Xtreme? Heard the air flow is rough
Great build! Did the white power cables come with the supply or did you swap them out?
They came with it but you can also get premium sleeved ones.
If I use a asus b450-f will I be able to use the usb c port on the front because I don’t know if the board supports it or not? (This is my first ever build)
This is the one I am searching for!!
FOR your AIO fans I notice you put the rad in place first with the fans on the inside of the case. Are they pulling air into the case from the side vent or are you pushing air out? just curious as I'm upgrading to a 12core CPU that will run hot and trying to figure out best air flow set up.
I actually did it wrong here as they're the wrong way around. They need to be turned over (on either side) to pull cold air into the case.
Hi so I was building my pc and I found out that the front panel connectors are like maybe 2-3 inches long I thought it was coming from the case and it’s a 6 pin layout where it connects to something do you know what it connects to?
Thanks for the video! Buying this soon!
Nice. Hope you enjoyed it enough to subscribe.
I love this case so much
Loved your job! Does an I7 works well with the 3200mhz memories? Im newbie.
Yes
Is it a good practice if all of the fans are set in a way that the air is flowing out. No fan is sucking air in.?
No. I made a mistake.
How did you fix it? Did you reverse the fans on Corsair cpu cooler or the other ones? Thanks
Excellent video I liked the shots, just a tip, a question, advice: more direct light to the product. Question? Why do I place the AIO fans like this? if all fans draw air where does it enter? Shouldn't it have a flow line? have a great afternoon.
Because I did it wrong. I noted this in the pinned comment.
@@TheProvokedPrawn ok, still excellent video thanks to him I bought the cabinet
Did you notice the annoying power button led that blinks crazy bright? Is there anyway to disable that?
ive got a b550 steel legend and i cant seem to find the place where the led strip connector pins go, its a full atx mobo so im totally confused on where they plug in
LegitTech lmao look at the manual.
How are the thermals on this? I'm planning on using the H510 (I'm sure they're both basically the same with minor things added to the H510i) and I'm worried that the temps are going to be high. No one has a video on the H510 so I can't be sure.
Is The Smart Device 2 on the back of the case same as Fan hub or Hue 2 from NZXT? And does H510 Elite comes with the smart device 2 too?
Fan controller - should I connect fans to MB instead to get control over them? Does provided controller have temp sensors to control fans?
Is the power button all ready for me to just plug in to mobo? Just ordered this case to build a new rig in
Kustomz was the power button ready for you
Hi I’m planning to build a PC and going to get the NZXT h510 (basically same case) and was wondering to know if the 2 stock coolers would be enough with the water cooler. The water cooler I’m getting is the coolermaster ml240l.
Does it come with everything like fans and cpu and etc...?
Lol. No.
When mounting the Radiator to the mount provided by the case, what screws did you use? The ones provided by the kraken? If so which ones?
That's a Corsair cooler. But yes, the screws come with the cooler.
The Provoked Prawn another question, what is the benefit of daisy chaining fans together? Would the aio software not be able to see the case fans if they were just plugged into a fan slot in the motherboard individually? Do they need to be daisy chained in order for, for example cam software to be enabled? Thanks for all the help! Building my first PC!
Hello, Which dimensions did you use for PCI-e x16 extender ? 220mm or 300mm ?
The front USB port on my case broke from the inside is there any way I can fix/replace it?
Did the screws needed for the fans and water cooler come with the case?
does a corsair H100i AIO cooler fit on the front of this case ?
The airflow is almost nonexistent at the front due to a very small area to let air in and a 90 degree turn for the air to make. I'm not sure as to whether it would fit but you certainly wouldn't get amazing performance
Anthony Vallecillo it does indeed fit I just installed it. The case is made for air to be sucked in through the front which is why there is a dust protector there. Have had no issues temperature wise and am running an I7 9700k and a 2070 super
Question. How have you placed your fans around the case? Are all of them in exhaust positions or are just the front ones exhaust and back intake? Just curious if the fans on the AIO radiator should be blowing on or sucking air in towards it.
Please see pinned comment
did you buy the verticle mount cable separately? is that corsair branded one you have setup?
Yes
Are the water cooler fans in your setup blowing air out or sucking in? 🤔🤔
They're wrong. I noted that in the comments.
Hey we’re does the front case fans plug into?? Do u have to connect that to the psu? I’m new to pc building so I don’t know a lot of info
So u know how u had the front of the fans facing the cpu on the h100i liquid cooler? I just realized I put my fans facing the other way is it a preference thing ?
You did it right
I did it wrong. I think I noted that in a pinned comment
Wondered what that audio cable was for.
I have this case (non I version) where do i plug in the USB 3.1 on the motherboard, i am using an msi b450 tomahawk
Check your motherboard manual?
definitely one of the things to look out for when pairing a motherboard with this case, you need the USB Type C 20 pin header, which I don't think your referenced motherboard has.
Danh Nguyen what is that, I’m building in the case with the ASUs tuf x570 WiFi and I turn on the psu and only the motherboard lights turn on after “trying to turn on the case” would love some help as for me I have the power switch of the case going directly into the psu like it says to do. Any thoughts would be great !
@@jerrymaddox8255 So my initial comment was in regards to the USB Type C Port that is on the top panel of the case near the front.
In terms of your issue though, its best simplified:
Power supply plugged into Motherboard via Power Cable
Motherboard connected to the Case, via a power switch cable.
Once complete, the button in the front should be able to power up the computer itself. I would suggest you refer the case manual to ensure you have the proper set up.
@@nguyendd31 My exact question. I am using the "ASUS AM4 TUF Gaming X570-Plus (Wi-Fi) ATX".
My mobo does not have an internal type c header. If the type c "case wiring" will hook into a regular usb header with slower speeds- that would be fine. Would that work?
Hello, if I have a single radiator AiO cooler where would you recommend I place it at? Rear or top front bracket? Should it also be an intake or exhaust? Thank you
Top is the best place for AIO always, back is good, front good but not that good, bottom is a No.
Front is not that good because it exhaust hot air into the case instead of fresh air.
How’s the airflow? Does it heat up fast? Does it accumulate a lot of dust? Sorry for asking too much questions I’m just curious
Where do you plug the Cable at 7:00 or do you not even need it?
You don't "need" it. It's an adapter to make it easier to plug in the front panel power connections if I recall correctly.
I have the same exact case. and I was told by a friend that the way Me and you both have the AIO mounted is incorrect that air gets trapped at the top of the radiator and in the pump, is that true, If so is it just NZXT having false promotional cases like that?
ruclips.net/video/DKwA7ygTJn0/видео.html
One thing to note is I put the fan the wrong way round. Otherwise it's fine.
@@TheProvokedPrawn Thank you for the link to the video, That really helps!